Sealants

Full Cure

• 24 Hrs.(110)
• Remains Tacky(10)
• 1 Hr(3)
• 30 Min. to 4 Hrs. Primed(2)
• 24 hrs./Expose to water 1 hr/Paint in 30 min(2)
• 24 Hours(2)
• 15 Min. to 2 Hrs. Primed(2)
• Less than 3 Hrs.(1)
• 5 min.(1)
• 4 Hours at 70 Degrees F and 40% R.H.(1)
• 24 hrs./Expose to water 3 hrs(1)
• 12 to 24 hrs.(1)

Viscosity

• Paste(55)
• 3200cP(4)
• Medium(3)
• Medium-Viscosity Mastic(2)
• 75,000cP(2)
• 700,000(2)
• 550,000(2)
• 20(2)
• 188,000/500,000 Thixotropic(2)
• 1000cP(2)
• Mastic(1)
• Light(1)
• Foam(1)
• 800,000 Thixotropic(1)
• 540,000 Thixotropic(1)
• 420/650 Thixotropic(1)
• 300(1)
• 17,000/50,000 Thixotropic(1)
• 1500cP(1)
• 100,000/500,000 Thixotropic(1)
• 100,000 to 500,000(1)

UNSPSC

• 31201616(54)
• 31201601(41)
• 31201606(40)
• 31201608(11)
• 31201612(9)
• 31181511(8)
• 46191503(7)
• 31181510(6)
• 15121502(5)
• 31201602(4)
• 13111307(3)
• 31201603(2)
• 31181509(2)
• 15121520(2)
• 46191606(1)
• 31201607(1)
• 31201514(1)
• 21101801(1)

Color

• Black(31)
• Red(25)
• Clear(22)
• Blue(18)
• White(16)
• Yellow/White(11)
• Yellow(10)
• Gray(9)
• Tan(6)
• Purple(5)
• Orange(5)
• Copper(3)
• Brown(3)
• Aluminum(2)
• Almond(2)
• School Bus Yellow(1)
• Reddish Brown(1)
• Off-White(1)
• Off White(1)
• Light Yellow(1)
• Cream(1)
• Beige(1)

Flash Point

• Greater Than 200 Degrees F(27)
• 200 Degrees F(18)
• Greater Than 250 Degrees F(11)
• Less Than 200 Degrees F(8)
• Greater Than 199.94DF(8)
• 240 Degrees F(7)
• 109 Degrees F(4)
• -4 Degrees F(4)
• Greater Than 212 Degrees F(3)
• 738 Degrees F(3)
• 240F(3)
• -14 Degrees F(3)
• None(2)
• Less Than 0 Degrees F(2)
• Greater Than 199.4 Degrees F(2)
• 250 Degrees F(2)
• 199DF(2)
• Greater Than 203 Degrees F(1)
• Greater Than 202 Degrees F(1)
• Greater Than 201 Degrees F(1)
• Greater Than 199.94 Degrees F(1)
• 800DF(1)
• 350 Degrees F(1)
• 32DF(1)
• 200DF(1)
• -156 Degrees F(1)

Item

• RTV Silicone(24)
• RTV Silicone Adhesive Sealant(16)
• Gasket Sealant(10)
• RTV Silicone Sealant(8)
• Gasket Maker(8)
• Marine Adhesive/Sealant(7)
• Polyurethane Based Sealant(6)
• Flange Sealant(6)
• Industrial Silicone Sealant(5)
• Straw Foam(4)
• Sealing Cement(4)
• Thread Sealant with PTFE(4)
• Silicon Sealant(3)
• Instant Gasket(3)
• Gasket Sealant 2(3)
• Gasket Adhesive(3)
• TFE Pipe Thread Sealant with PTFE(2)
• Supreme Paintable Silicone(2)
• Super Silicone Sealant(2)
• Silicone Gasket Sealant(2)
• RTV Silicone Instant Gasket(2)
• RTV Silicone Gasket Maker(2)
• Polyurethane Insulating Foam(2)
• Permagum Sealing Gum(2)
• Gun Foam(2)
• Gasket Sealant 1(2)
• Foam Sealant(2)
• Fireblock Straw Foam(2)
• Eco Straw Foam(2)
• Anaerobic-Based Flange Sealant(2)
• 5920 Copper, RTV Silicone Gasket Maker Sealant(2)
• 587(TM) Blue RTV Silicon Gasket Maker(2)
• Window/Door Sealant(1)
• Straw Foam Sealant(1)
• Spray Foam Kit II-605 Class 1(1)
• Spray Foam Kit II-605(1)
• Spray Foam Kit II-205 Class 1(1)
• Spray Foam Kit II-12(1)
• Spray Foam Kit II-105(1)
• Spray Foam Hose & Gun Assembly(1)
• Silicone(1)
• Sealing Cement Pouches and Fiber Filler(1)
• Sealant(1)
• RTV Silicone Sealant - Black(1)
• RTV Silicone Gasket Maker 598(TM)(1)
• RTV Silicone Gasket Maker 5699(TM)(1)
• RTV Silicone Adhesive, Sealant(1)
• RTV Silicon Adhesive Sealants(1)
• Minimal Expansion Foam(1)
• Medium Strength Thread Sealant(1)
• Low Strength Thread Sealant(1)
• Instant Gasket Maker(1)
• High Temp Red RTV Silicone Lubricant(1)
• Hi-Tack Gasket Sealant(1)
• Hi-Tack Gasket Dressing(1)
• Handi-Foam Sound Barrier Kit(1)
• Handi-Foam Roof Patch Kit(1)
• Handi-Flow Slow-Rise Kit(1)
• Gun Foam Sealant(1)
• General Purpose Insulating Foam(1)
• Gasket Sealant, Silicone(1)
• Gasket Adhesive Sealant(1)
• Foam Kit 2-14(1)
• Flooring Adhesive, Carpet And Tile(1)
• Flexible Gasket Flange Sealant(1)
• Fireblock Polyurethane Foam Sealant(1)
• Fireblock Gun Foam(1)
• Expanding Foam(1)
• Eco Gun Foam(1)
• Construction Adhesive, Professional Drywall(1)
• Construction Adhesive, Panel And Foamboard(1)
• 5699 Gray, RTV Silicone Gasket Maker(1)

Type

• One Component(18)
• High Temp.(10)
• Two Component(6)
• Multipurpose(6)
• For Aluminum and Other Metals(6)
• Anaerobic(6)
• Oil-Resistant(5)
• Instant Sealing, Oil-Resistant(5)
• High Performance, Acetoxy Cure(5)
• General Purpose(5)
• For Hazardous Locations(5)
• Spray Foam(4)
• Slow Dry, Flexible Cure(4)
• Shrink-Resistant, Coats Precut Gaskets(4)
• Industrial Grade(4)
• Heat-Resistant Neoprene(4)
• Flexible Seal(4)
• Silicone(3)
• Non-Setting, Non-Hardening, High Temp(3)
• Multipurpose Aerosol(3)
• Low Odor, Noncorrosive(3)
• High Temp., Sensor-Safe(3)
• Watertight in 2 hrs., Fast Dry(2)
• Waterproof(2)
• Sensor-Safe(2)
• Rigid, High Torque(2)
• Oil-Resistant, Noncorrosive(2)
• Oil and Water-Resistant, Noncorrosive(2)
• Low Viscosity Neoprene(2)
• Increased Oil Resistance(2)
• For Rubber and Gaskets(2)
• Fast Dry, Rigid Cure(2)
• Fast Cure(2)
• Cartridge(2)
• Brush Top Paste(2)
• Adhesive/Sealant(2)
• Window/Door Straw Foam(1)
• Water-Resistant Neoprene(1)
• UV-Resistant Fast Cure 4000 UV(1)
• UV-Resistant(1)
• Tube(1)
• Solvent Based(1)
• Semisolid for Vertical Applications(1)
• Non-Shrinking(1)
• Non-Setting, Non-Hardening (1)
• Non-Corrosive(1)
• Minimal(1)
• Maximum Temp. Resistance(1)
• Low VOL(1)
• Interior/Exterior(1)
• High Temp., Low Odor(1)
• High Temp. Industrial Grade(1)
• High Tack, Solvent-Free Semisolid(1)
• High Performance, Neutral Cure(1)
• High Performance(1)
• High Moisture Resistance, Indoor/Outdoor(1)
• Can(1)

Expansion Ratio

• 2-3:1(17)
• 4:1(6)
• 3-5:1(2)
• None(1)
• 3-4:1(1)
• -8:1(1)

Temp. Range

• -75 to 500 Degrees F(16)
• -65 to 300 Degrees F(14)
• -65 to 500 Degrees F(11)
• -75 to 400 Degrees F(9)
• -200 to 200 Degrees F(8)
• -40 to 190 Degrees F(7)
• -200 Degrees to 240 Degrees F(7)
• -30 to 300 Degrees F(6)
• -75 to 625 Degrees F(5)
• -75 to 450 Degrees F(4)
• -65 to 650 Degrees F(4)
• -65 to 450 Degrees F(4)
• -65 to 400 Degrees F(4)
• Up to 400 Degrees F(3)
• 80 - 450 Degrees F(3)
• -75 to 600 Degrees F(3)
• -70 to 650 Degrees F(3)
• -65F to 400 Degrees F(3)
• -65 to 700 Degrees F(3)
• -58 to 662 Degrees F(3)
• -50 to 500 Degrees F(3)
• -40 to 180 Degrees F(3)
• -200 to 240F(3)
• -200 To +200 Degrees F(3)
• -80 to 450 Degrees F(2)
• -65 to 500DF(2)
• -65 to 450DF(2)
• -50 to 250 C(2)
• -40 to 250 Degrees F(2)
• -30F to 150DF(2)
• -30 to 158 Degrees F(2)
• -250 to 500 Degrees F(2)
• -20 to 400 Degrees F(2)
• -20 to 200 Degrees F(2)
• -20 to 120 Degrees F(2)
• Up to 475 Degrees F(1)
• Resistant Up To 625 Degrees F(1)
• Remains Stable Between -49 Degrees F to 302 Degrees F(1)
• 65 to 100DF(1)
• 60 to 100 Degrees F(1)
• 40 to 115 Degrees F(1)
• 0 to 150 Degrees F(1)
• -85 to 600 Degrees F(1)
• -85 to 450 Degrees F(1)
• -85 To 500 Degrees F(1)
• -80 to 500 Degrees F(1)
• -75 to 500DF(1)
• -65 to 400DF(1)
• -65 to 300DF(1)
• -65 to +400DF(1)
• -60F to 400DF(1)
• -60 to 450 Degrees F(1)
• -60 to 400 Degrees F(1)
• -60 Degrees to 450 Degrees F(1)
• -58 to 572 Degrees F(1)
• -40 to 400 Degrees F(1)
• -200 to +240 Degrees F(1)
• -20 to 600 Degrees F(1)

Specific Gravity

• 1.01(15)
• 1.1(11)
• 1.05(10)
• 1.50(6)
• 1.30(6)
• 1.10(6)
• 1.04(6)
• 0.88(6)
• 2.9-3.3(5)
• 1.13(5)
• 1.03(5)
• 1.20(4)
• 1.2(4)
• 1.0(4)
• 1.31(3)
• 1.18(3)
• 1.485(2)
• 1.45(2)
• 1.27(2)
• 1.26(2)
• 1.08(2)
• 1.60(1)
• 1.55(1)
• 1.36(1)
• 1.34(1)
• 1.32(1)
• 1.25(1)
• 1.23(1)
• 1.19(1)
• 1.12(1)
• 1.09(1)
• 1.07(1)
• 0.98(1)
• 0.96(1)
• 0.872(1)
• 0.86(1)

Application Time

• 10 min.(17)
• 30 min.(12)
• 20 min.(11)
• 5 min.(7)
• 45 min.(5)
• 2 min.(5)
• 1 min.(5)
• Up to 12 Min.(4)
• Tack Free: 30 mins; Full Cure: 24 hrs.(4)
• Tack Free 30 min.(4)
• 4 hrs.(4)
• 2(4)
• 15 min.(4)
• 30-60 Sec(3)
• 10 to 20 min.(3)
• 1 hr.(3)
• Up to 15 Min.(2)
• 4(2)
• 1 to 2 hours(2)
• 1(2)
• Unprimed: 6 to 48 hrs.; Primed: 1 to 6 hrs.(1)
• Unprimed: 6 to 48 hrs.; Primed 1 to 6 hrs.(1)
• Unprimed: 6 to 24 hrs.; Primed: 1 to 3 hrs.(1)
• Unprimed: 4 to 24 hrs.; Primed: 1 to 24 hrs.(1)
• Unprimed: 30 mins to 6 hrs.; Primed: 1 to 3 hrs.(1)
• Unprimed: 3 to 24 hrs.; Primed: 1 to 6 hrs.(1)
• Tack Free: 25 mins; Full Cure: 24 hrs.(1)
• Tack Free: 20 mins; Full Cure: 24 hrs.(1)
• Less Than 3 Hours With Or Without Primer(1)
• Less Than 1(1)
• Leak Proof Seal in 1 Minute(1)
• 60 min.(1)
• 5 to 10 min.(1)
• 4 min.(1)
• 30 to 40 min.(1)
• 2 hr.(1)
• 120 to 240 Sec(1)

Includes

• Nozzle(14)
• Gun And Hose Assembly And Initial 8-pk Of Nozzles(3)
• Five 3-1/4 oz. Cement Pouches(2)
• Straw(1)
• 9-1/2 ft. Hose(1)
• 25mL Syringe and 0.88 oz. Primer(1)

Size

• 3 oz. Tube(11)
• 12 oz.(11)
• 300ml Cartridge(10)
• 24 oz.(9)
• 8 oz.(6)
• 10.1 oz. Cartridge(6)
• 8 oz. Net Wt. Pressurized Can(5)
• 50ml Tube(5)
• 300 mL(4)
• 3 oz.(4)
• 10.15 oz. Cartridge(4)
• 1 qt. Can(4)
• 80ml Tube(3)
• 70ml Tube(3)
• 50 mL(3)
• 20 oz.(3)
• 13 oz. Cartridge(3)
• 11.1 oz. Cartridge(3)
• 1/10 gal.(3)
• 9.0 oz.(2)
• 8 fl. oz. Brush Top(2)
• 7.25-Oz. PowerBead(TM) Can(2)
• 7.25 oz. Pressurized Tube(2)
• 7.25 oz. Power Can(2)
• 7 fl. oz. Tube(2)
• 5 oz. Tube(2)
• 5 gal., 40 lb. Pail(2)
• 350g Cartridge(2)
• 3 fl. oz. Tube(2)
• 2.8 oz. Tube(2)
• 190ml Cartridge(2)
• 12.9 oz. Cartridge(2)
• 115.7 lb.(2)
• 11 oz. Cartridge(2)
• 1.5 oz. Tube(2)
• Kit: 25ml Syringe/0.88-Oz. Primer(1)
• Blue/7.25 oz. Net Wt. Pressurized Can(1)
• 90mL Aerosol Can(1)
• 9.8 oz.(1)
• 9.5 Ft(1)
• 85g Tube(1)
• 80 oz. Can(1)
• 80 ml Tube(1)
• 80 mL(1)
• 8.75 oz. Pressurized Tube(1)
• 75 Bdft(1)
• 70 mL(1)
• 7.5 oz. PowerBead(TM) Can(1)
• 7.25-Oz. Automatic Tube(R)(1)
• 7 oz. pressurized Tube(1)
• 6.42 oz. Can(1)
• 5 oz. Cartridge(1)
• 5 gal.(1)
• 41 lb.(1)
• 37.8 lb.(1)
• 36.25 oz. Bag(1)
• 350 mL Brush Can(1)
• 300mLCartridge(1)
• 3/16" x 100 ft. Cord(1)
• 3.5 oz. Tube(1)
• 3.35 oz. Tube(1)
• 3.1 lb.(1)
• 29 oz.(1)
• 26.4 lb.(1)
• 250ml Tube(1)
• 250ml Brush Top Can(1)
• 250 mL(1)
• 250 Bdft(1)
• 200 ml Spray Can(1)
• 2 oz. Tube(1)
• 2 lb. Block(1)
• 19g Stick(1)
• 190mL Can(1)
• 190mL Aerosol Can(1)
• 190 mL(1)
• 18g Stick(1)
• 16.25 oz. Bag(1)
• 16 oz. Carton(1)
• 16 oz. Can(1)
• 16 oz.(1)
• 16 fl. oz. Brush Top(1)
• 13 Cft(1)
• 12 oz. Net Wt. Tube(1)
• 11 oz. Tube(1)
• 10.5 oz.(1)
• 10.15 fl. oz. Cartridge(1)
• 10 Oz.(1)
• 1 pt. Can(1)
• 1 pt.(1)
• 1 gal. Can(1)
• 1 gal.(1)
• 0.5ml Tube(1)

Substrates

• Aluminum, Brass, Iron, Steel, Glass, Plastic, Stone, Wood(10)
• All Except Polyethylene, Polypropylene, Silicone, Oils, Greases, Mold Release Agents And Similar Materials(10)
• Metal, Wood, Neoprene, Reclaim, Sb-R, Butyl Rubber, And Plastics(6)
• Bonds Metals, Wood, Plastics, Glass(5)
• Metal, Plastic(4)
• Concrete, Stone, Wood, Tile, Fiberglass, Brick, Marble, Glass, Metal, Plastic(4)
• Aluminum, Brass, Iron, Steel(4)
• All Except PTFE And Any With Oily Residues(4)
• Adheres To Most Surfaces(4)
• Most Metals Including Steel and Aluminum(3)
• Metals and Plastics(5)
• Metal, Plastic, Various Gasket Materials(3)
• Wood, Pine, Glass, Ceramic Tile, Concrete, Stainless Steel, Plastic Laminate, Aluminum(2)
• Use On Coarse Metal Threads(2)
• Transmissions And Cast Metal Housings(2)
• Stamped Metal Assemblies(2)
• PTFE and Substitutes(2)
• Metal(2)
• Gelcoat, Wood, Metal, Rubber, Plastics, Aluminum, Steel, Stainless Steel, ABS, Pine, FRP(2)
• Gelcoat, Fiber Reinforced Plastic (FRP), Wood, Metal, Most Plastics, Glass(2)
• Fiberglass, gelcoat and wood(2)
• Close-Fitting Metal Surfaces.(2)
• Ceramics, Porcelain, Glass, Fiberglass Composites, Enamel, Aluminum, Stainless Steel, Wood, And Wallboard(2)
• All Metals, Except Aluminum(2)
• All Metals, Especially Aluminum(2)
• Wood, Metal, Plastic, Drywall, Concrete(1)
• Wood, Metal, Glass, And Most Plastics(1)
• Wood, Granite, Glass, Ceramic Tile, Concrete, Stainless Steel, Plastic Laminate, Aluminum, Porcelain(1)
• Will Not Sag or Run Off(1)
• Variety Of Plastic Substrates, As Well As Glass, Ceramics, And Metals.(1)
• Timing Gear, Valve Covers, Water Pumps, Gearboxes, Transmission Pans(1)
• Seal Or Bond Rubber, Cork, Felt, Paper, And Metal Gaskets.(1)
• Plywood, Hardboard, Gypsum Wallboard, Steel And Aluminum(1)
• Oil Pans, Valve Covers, Timing Gear Covers, Differential Covers(1)
• Neoprene, Reclaim, Sb-R And Butyl Rubber(1)
• Metal, Glass, Natural And Synthetic Fibers, Wood, Ceramics, Silicone Rubbers, Pointed Surfaces, And Many Plastic Substrates(1)
• Metal Flanges(1)
• Lock And Seal Tapered Stainless Steel And All Other Metal, Pipe Threads And Fittings.(1)
• Glass, Metal, Plastics, Fabric, Vinyl And Weather Stripping(1)
• Glass, Ceramic, Fiberglass, Porcelain, Non-Oily Woods, Canvas, Metals, Plastics, Rubber(1)
• Gelcoat, Fiberglass, Wood, Metal, Rubber, Plastics(1)
• For Sealing Non-Rigid, Vibrating Metal to Metal Assemblies(1)
• Foamboard Insulation, Polystyrene, Wood, Drywall, Paneling, Plastics, Tub Surrounds, Fiberglass, Ceramic Tile, Metal(1)
• Excellent for Sealing Rigid, Permanent Assemblies(1)
• Excellent for Sealing Flexible Metal to Metal Assemblies(1)
• Cork and Cut Gasket Material(1)
• Carpet, Artificial Turf And Plastic-Backed Corded Tiles(1)
• Bonds And Seals To Most Surfaces, Not For Concrete.(1)
• Aluminum, Brass, Iron, Steel, Cork, Glass, Rubber, Felt, Plastic(1)
• All Metals, Including Aluminum Flanges(1)
• All Except PTFE and Substitutes(1)
• Adheres to a Wide Range of Substrates(1)

Green Environmental Attribute

• VOC Levels Meet SCAQMD Requirements(8)
• Product Contributes To Reducing Energy Consumption(6)
• Made From Rapidly Renewable Resource(3)
• Does Not Contain Phthalates, Formaldehyde, Toxic Metals, Aromatic And Halogenated Compounds, Butoxyethanol, 2-Methoxyethanl, Isophorone, Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Acrolein, Acrylonitrile(2)

Standards

• CFIA(7)
• ASTM E-84(7)
• MIL-A-46106B, Type I And Certified To ANSI/NSF Standard 51(5)
• NSF/ANSI 51, CFIA, UL/ULC Classified, RoHS Compliant(4)
• NSF(R) Category P1(4)
• NSF White Book Registered(4)
• Meets NSF-ANSI 51, Food Processing Equipment(4)
• UL Classified, AAMA-812(3)
• Noveon Tested for CPVC(3)
• Meets Mil Spec Mil-M-81288(3)
• ICCES-1868, UL Classified, ASTM E-814(3)
• ASTM-E-84 Class 2(3)
• ABS, CFIA(3)
• UL, NSF, CFIA(2)
• UL 94, E-84 Class I(2)
• NSF, UL(2)
• Meets Mil-Spec Mmm-A-121(2)
• ISO 846 Approved(2)
• meets Coast Guard specification requirements for flotation in Title 33 code of Federal Regulations, paragraph 183.114; ASTM E-84 Class II fire-rated; UL-94 rated(1)
• UL94HB(1)
• UL, NSF, FDA Reg. No. 21 CFR 177-2600, Meets ASTM C920 for GM, Ford and Chrysler.(1)
• UL, ABS, CFIA, NSF ANSI 61, ULC(1)
• UL Listed R-13919, Mil-C-21567A(DM-2),Mil-S-8660C(DM-3),Mil-S-23586E(1)
• UL Classified, MIL(1)
• UL Classified(1)
• UL 94(1)
• TT-S-001543A Class A, TT-S-00230C Class A, MIL-A-46106B Group 1 Type 1, ASTM C-920, FDA 21 CFR 177.2600(1)
• Spec C 920, Class 25, Type S, Grade NS(1)
• NSF/ANSI 61, CFIA(1)
• Mil-A-46106B, Type I And ANSI/NSF Standard 51(1)
• Meets Mil-A-46106B, Type I And Certified To Ansi/Nsf Standard 51(1)
• Meets Mil-A-46106B, Type I And ANSI/NSF Standard 51(1)
• Meets Mil Spec Mil-M-81289(1)
• Meets Mil Spec Mil-A-5092B(1)
• Meets MIL-S-45180D, Type II(1)
• Gm-998-5990 Type 1, Ford Wse-M4G323-A6, Daimler Chrysler Ms-Gf44 Grade A, CFIA(1)
• FDA, UL, MIL-A-46106(1)
• FDA, NSF, USDA, UL, MIL-A-46106(1)
• American Plywood Assoc AFG-01, ASTM C557, CAN/CGSB-71.25M(1)
• ASTM E84(1)
• ASTM E-84 Class II fire-rated; UL-94 rated(1)
• ASTM E-84 Class II fire-rated,UL-94 rated,ASTM D-1621(1)
• ASTM C557, CAN/CGSB-71.25M(1)
• ASTM C-518(1)

Insulation Value

• 4-5(7)
• R-5(6)
• R-6 to 7(5)
• R-4 to 5(4)
• R-4(3)
• R5 Per Inch(1)
• R-6.1/inch(1)
• R-5.9/inch(1)
• R-5 to 6(1)
• R-3.7/inch(1)
• 4.9 Per In. Thickness(1)

Characteristics

• Sealing Cement for Use in Fittings and Sealing Hubs In Hazardous Locations(5)
• Low Volatile Formula(5)
• Versatile, Brushable, High Immediate Strength And Heat Resistant(4)
• VOC-Free Propellant(4)
• Room Temp Cure, Forms Tough Rubber Seal, Non-Slumping in Overhead Or Vertical Apps, Temp Cycling, UV Light And Ozone Resistant(4)
• Resistant To Fluids Including: Industrial Fuels, Oils, Water, Engine Combustion Products, Water/Glycol, Methanol Mixtures, Lubricating Oils, Gasoline, Kerosene Fluids, Fluorocarbon Refrigerants, Non-Setting And Non-Hardening Even At High Temperatures(4)
• Oil Resistant, Water-Proof Silicone, Enhanced Load Bearing And Shock Absorption(4)
• 100% Pure Silicone(4)
• Soy Based, More Than 10% Of Content Is Renewable Material, Quick Expanding, Stops Air Infiltration(3)
• Quick Expanding Formula That Stops Air Infiltration and Seals Gaps and Penetrations(3)
• Oil Resistant(3)
• Non Toxic, Non Hardening, Self Lubricating Formula(3)
• No Shrink/No Crack/Waterproof(3)
• Easy to Apply, Sets Up Quickly, Cures at Room Temperature(3)
• Chemically Stable After Exposure To The Elements(3)
• 2 Part, Cuttable in 2 to 5 Minutes, Resists Water Absorption, Excellent Sound Deadening and Structural Strength Enhancement(3)
• Single RTV Compound Designed To Provide Formed-In-Place Gaskets For Mechanical Assemblies(2)
• Single Component, Room Temp Vulcanizing Compound, Waterproof, Flexible Seal, Non-Paintable(2)
• Single Component, Room Temp Vulcanizing Compound, Low Volatility, Fills Gaps Up To 0.25"(2)
• Provides Instant Low Pressure Seal And Does Not Shrink Or Relax(2)
• Provides Instant Low Pressure Seal And Does Not Crack Or Shrink(2)
• One component, Polyurethane Expansion Foam Fills and Seals Large Cavities, Effectively Stops Air Infiltration, will not Shrink and Dries Hard, 30 Day Can Use.(2)
• One Part Sealant, White, Waterproof Seal, Flexible, UV Resistant, Weatherproof, Sandable, Will Not Yellow Like Urethanes, Cure, Low VOC, Less Than 1% Non Shrinking And Non Sagging(2)
• Oil And Water Resistant, Noncorrosive, Low Odor, Low Volatility(2)
• Non-Setting, Non-Hardening, Increased Adhesive Properties Over Universal Blue(2)
• Mildew-Resistant, Fast, Waterproof Seal, Withstands Water Contact Within 2 Hours(2)
• Lower Viscosity For Easier Brushing And Sprayability(2)
• General Purpose. Forms A Tough, Flexible Silicone Rubber Gasket. Resists Aging, Weathering, And Thermal Cycling Without Hardening, Shrinking, Or Cracking.(2)
• Forms Flexible And Crack Resistant Seal(2)
• Flexible Waterproof Seal(2)
• Fast Curing, Heavy Paste, Flexible, Non-Sagging(2)
• Wax Like Semi Solid Chemical Resistant(1)
• Waterproof, Flexible Seal, Resistant To Oil, Water, Weather, Vibration, And Grease, Non-Paintable(1)
• Water Resistant, Insulating(1)
• Water Clean Up, Paintable, Toolable, Will Not Over Expand(1)
• Viscous Liquid With Solvent Odor And Blend Of Elastomers And Resins Is Brushable And Dries Quickly To A High Tacky Film.(1)
• U.S. patent number 6,345,776(1)
• Thixotropic Based, Rapid Cure, Medium Strength, Solvent Resistant, Fills Gaps Up To 0.050"(1)
• Solvent Resistant, Easy Assembly. Prevent Galling And Withstand Temperatures Up To 400DF. For High Pressure Applications To 10,000 PSI. Disassembles With Hand Tools.(1)
• Solvent Free, Indoor And Outdoor, Nonflammable, Water-Resistant, Water Cleanup(1)
• Solvent Based, Strong Initial Tack, Resists Aging, Will Not Become Hard Or Brittle, Resistant To Moisture And Intermittent Cold(1)
• Solvent Based, Permanently Flexible, Water-Resistant, Interior/Exterior(1)
• Single Component, Room Temperature Vulcanizing Gasketing Compound Designed To Provide Reliable Formed-In-Place Gaskets For Mechanical Assemblies(1)
• Sensor-Safe, Low Odor and Non-Corrosive Formula(1)
• Sensor Safe, Fills Gaps up to 0.25", High Oil Resistance And Joint Movement Values(1)
• Sensor Safe And Manufactured To Meet Oem Specifications, Resists Oil, Water, Anti-freeze, And Transmission Fluid(1)
• Semi Solid Stick, Forms Flexible Seals, Fills Gaps To 0.010"(1)
• Seals Out Moisture, Air, Dust, Dirt and Noise(1)
• Seals Flanges, Fittings, Connections And Flexible Assemblies Against Leakage(1)
• Retains Flexibility, Oil Resistance Properties,Sensor Safe, Low Odor, and Non-Corrosive(1)
• Reliable, Paste-Like, Sets Slowly To A Pliable Film, Best Suited For Non-Rigid, Vibrating Assemblies, Resistant To Gasoline And Other Solvents(1)
• Reliable, Paste-Like, Sets Quickly To A Hard Set, Resistant To Gasoline And Other Solvents(1)
• Rapid Curing, Heavy Paste, Non-Corrosive(1)
• Provides Instant Seal And Fluid Resistance. Non-Corrosive, Low Odor, Low Volatiility. Fills Gaps To 0.250"(1)
• Oil Resistant. Resists Steam, Chemical And UV Ozone Exposure, As Well As Aging, Weathering And Thermal Cycling Without Hardening, Shrinking Or Cracking.(1)
• Oil Resistant, Non-Corrosive(1)
• Oil Resistant, Low Odor, Noncorrosive, Low Volatility(1)
• Noncorrosive, Fills Gaps up to 0.25", High Oil Resistance And Flexibility(1)
• Non-Flammable, Plastic Safe(1)
• Low VOC, Waterproof, Remains Flexible, And Will Not Crack, Crumble Or Dry Out(1)
• Instant Seal, Blowout Resistance, Replaces Most Cut Gaskets, Low Odor, Sensor-Safe(1)
• High Viscosity, Medium Strength, Anaerobic Thread Sealant. Particularly Suitable For Use On Stainless Steel Without Surface Activator. Resists Pressures To 10,000 PSI(1)
• High Viscosity, Low Strength, Anaerobic Thread Sealant,Resists Pressures To 10,000 PSI(1)
• High Temperature. Anaerobic Gasket/Sealant, Solvent And Chemical Resistance. Maintains Clamping Loads For Strong, Leakproof Assemblies. Fills Gaps Up To 0.010"(1)
• High Temperature, Easy to Apply, Low Volatile Formula(1)
• High Temperature, Easy to Apply(1)
• High Temperature Resistance, Low Volatility(1)
• High Temp, Oil Resistant, Water-Proof Silicone, Enhanced Load Bearing/Shock Absorption(1)
• High Strength, Long Tack Range, And Resistant to Water, Oil And Grease(1)
• High Load Engine Conditions With Closely Spaced Bolt Patterns, Oil And Water-Glycol Resistance(1)
• High Flexibility, Forms A Tough, Flexible Silicone Rubber Gasket, Oil Resistant. Fills Gaps To 0.25"(1)
• High Flexibility, Forms A Tough, Flexible Silicone Rubber Gasket, Excellent Oil Resistance. Fills Gaps To 0.25"(1)
• General Purpose, Single Component, (RTV) Adhesive/Sealant Compound, Designed For The Sealing Of Mechanical Assemblies(1)
• Gel-Like Material Used Between Mating Metal Flanges, Fills Surface Imperfections, Provies Tough, Resilient, Solvent And Temperature-Resistant Seal, Flexes With Flange Movements. Fills Gaps To 0.010"(1)
• Formulated for Superior Adhesion to Plastic Surfaces, Has Very High Green Strength to Hold Parts Together While Still Curing(1)
• Forms Permanent, Waterproof Bond, Has Cold Temperature Extrusion And Can Be Applied Around Joints(1)
• Forms Flexible, Solvent-Resistant Seal That Will Not Tear Or Decay, Resists Low On-Line Test Pressures, Uncured(1)
• Flexible Seal, Oil And Transmission Fluid Resistant, Noncorrosive, Low Odor, Low Volatility(1)
• Fills Gaps Up To 0.25", Low Odor, Noncorrosive, Oil And Coolant Resistant(1)
• Fast Curing, Tack Free In One Hour, 24 Hour Full Cure, Flexible Allowing Structural Movement, Weather Resistant, Good For Marine Environment(1)
• Fast Cure, Sensor Safe, Low Odor, Noncorrosive, Fills Gaps up to 0.25"(1)
• Easy to apply, remains workable for up to four hours, won't sag or flow in vertical or horizontal seams, effectively absorbs stress caused by shock, vibration, swelling or shrinking and has excellent resistance to weathering and salt water(1)
• Easy to Apply, Sets Up Quickly, Cures at Room Temperature, Low Volatile Formula(1)
• Easy to Apply, Sets Up Quickly(1)
• Delivers Moisture Resisting Air Barrier, Distinctive Gray Color for Easy Product Recognition by Inspectors(1)
• Delivers A Draft Stop Barrier(1)
• Covers 105 Board Feet or 8.7 Cubic Feet(1)
• Bonding Properties To Oil Contaminated Metals And Oil Resistance(1)
• Anaerobic Gasket/Sealant, Solvent And Chemical Resistance. Maintains Clamping Loads For Strong, Leakproof Assemblies. Fills Gaps Up To 0.010"(1)
• AST-RTV(TM) Silicone is a Multi-Purpose Single Component Adhesive Sealant That Quickly Adheres to Most Surfaces. Provides a Tough, Resilient, Silicone Rubber Good For Hundreds of Applications.(1)
• 14 Cubic ft. Yield, Remains Liquid Longer To Fill Crevices For Complete Void Fill, Rises And Cures To A Rigid State, Closed-Cell(1)

Application

• Window and Door(5)
• Used To Contain And Restrict The Passage Of Gases And Explosions In Classified Areas(5)
• Sensor Safe, Replaces Gaskets, Seals and Dressings(5)
• Protection Of Leads And Sealing Of Electrical Insulation, Ductwork, Vents, Flues, Doors And Windows(5)
• Seals Metal To Metal And Plastic To Plastic With Or Without A Gasket(4)
• For Rubber and Metal, Bonds Gaskets to Appliances, Light Fixtures and Farm Equipment, Brush, Spray, Roll Coat(4)
• Fills Gaps to 0.25" Between Parts that are Mated(4)
• Coat Pre-cut Gaskets for Increased Reliability(8)
• Aerosol Spray(4)
• Safe for CPVC, Fills Thread Imperfections and Provides Leak Proof Joints, Prevents Corrosion, Seizing and Galling(3)
• Improves Seal On Gaskets(3)
• For Spray Insulating and Sealing Large Areas or Cavities(3)
• Draft Stopping(3)
• Valve Cover and Oil Pan Gaskets, Cover Plates, Hose Connections(2)
• Used For Sealing Panels, Window Plates, Flues, And High Temperature Applications(2)
• Used For Pump Housings, Machine Tools, Compressors, Gearboxes, Transmission And Oil Pans, And Valve Covers(2)
• Use For Sealing Panels, Window Plates, Oven Doors, And Flues(2)
• Timing Gear Covers, Gearboxes, Compressors, Stamping Sheet Metal Covers, Intake Manifold End Seals, Water Pumps, Valve Covers, and Transmission Pans(2)
• Sealing Automotive Trim, Sealing Drip Rails, Sealing Taillight and Sunroof Assemblies, Filleting and Caulking Joints to Provide a Water and Dust Barrier, Sealing Vinyl Roof Top Fabrics(2)
• Sealant for Windshields and Sun Roofs(2)
• Replaces Most Cut Gaskets(2)
• Oil Pans, Valve Covers, Timing Gear Covers, Differential Covers.(2)
• Makes Or Dresses Gaskets In Rigid Assemblies. Eliminates Compression Set.(2)
• Lock And Seal Metal Pipes And Fittings To Prevent Loosening And Leakage From Shock And Vibration.(2)
• Ideal for rub-rails, stern-joints, deck and through-hull fittings, and across plates.(2)
• Gasket Material(2)
• For Sealing Joints, Gaps and Penetrations(4)
• For Rigid Flange Assemblies(2)
• For Gearbox And Engine Casings, Fuel And Water Pumps, Auto Thermostats, Pipe Flanges, And Other Mated Surfaces.(2)
• For Air Compressors, Thermostats, Fuel And Water Pumps, Gearbox And Engine Casings, And Other Mated Surfaces.(2)
• Designed For Marine Applications Above And Below The Water Line(2)
• Cures without Shrinkage, Seals Against Oil, Water and Anti-freeze(2)
• Bonds fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line, center board trunk joins, between struts and planking, stern joins, deck housing, etc.(2)
• Bonds Leather, Rubber, Plastics and Gasketing Materials(2)
• Adhere to Wood, Glass, Plastic; Nonhardening, Water Resistant, and Nonstaining(2)
• When Long Term Seal Is Needed Above Or Below The Waterline, Such As Hull To Deck Seams, Marine Hardware And Hull And Stern Joints(1)
• Void-fills and Cavity-fill Applications(1)
• Valve Covers, Timing Gear Covers, Differential Covers, Oil Pans, Transmission Pans, Water Pumps, Thermostat Housings(1)
• Valve Covers, Timing Covers, Oil Pumps, Water Pumps, Manifold End Seals, And Thermostat Housings(1)
• Valve Covers, Oil and Transmission Pans, Intake Manifolds, Water Pumps, Timing Chain Covers, Thermostat Housings(1)
• Used for Gearbox And Engine Castings, Seals And Fills Gaps Up To 0.050"(1)
• Used for Filling, Insulating, Sealing, Bonding, Hvac, Electrical, Industrial, Plumbing, Around Electrical Outlets, Utility Panels, Ducts, Pipes, Doors, Windows, Base Plates, Joints, Cracks, Crawlspaces, Foundations, Spot Insulating, Touch-Ups(1)
• Used For Making Gaskets(1)
• Used For Gearboxes, Stamped Sheet Metal Covers, And Compressors(1)
• Used For Flexible Flanges(1)
• Used For Cover Plates And Threaded And Hose Connections(1)
• Used As Form-In-Place Gasket On Rigid Flanged Connections Such As Gearbox And Engine Castings.(1)
• Use On Rigid Or Flexible Flanges, Also On Pump Housings, Machine Tools, Compressors, Gearboxes, Transmission Pans, Valve Covers, And Oil Pans(1)
• Use On OE Assembly Lines, Gearboxes, Stamped Sheet Metal Covers, Compressors, And Gearboxes(1)
• Use For Pump Housings, Machine Tools, Compressors, Gearboxes, Transmission Pans, Valve Covers, And Oil Pans(1)
• Use For Pump Housings, Machine Tools, Compressors, Gearboxes, Transmission Pans, And Valve Covers(1)
• Use For Bonding And Sealing Electrical Applications.(1)
• Use As A Form-In-Place Gasket On Rigid Flanged Connections Such As Gearbox And Engine Castings(1)
• To Seal , Bond Caulk, Waterproof and Insulate(1)
• Stamped Sheet Metal Covers, E.G. Timing Covers, Oil Sumps(1)
• Sound-Deadening Assemblies(1)
• Seals Gaps And Cracks(1)
• Sealing, Waterproof Sealant, Instant Gasket Sealing and Insulating.(1)
• Sealing, Bonding, Protection and Waterproofing In HVAC, Electrical, Construction, Metal Working, For Filling Gaps Between Mating Parts, Gearboxes, Pumps, Motors and For General Gasket Sealing.(1)
• Seal and Insulate Around Windows and Door Frames(1)
• Seal Threaded Hose Connections, Waterproof And Protect Electrical Terminals And Wiring. Gaskets, Threaded And Hose Onnections, Weatherstripping, Rear Axle Assembly, Filter Line Connections, Terminal Protector, Tubeless Tire Beads, Weatherstripping.(1)
• Replaces Gaskets, Seals and Dressings(1)
• On Glass, Wood, Plastic, Vinyl and Ceramic(1)
• Makes Instant, Leak Proof Gaskets On All Engines, Drive Train Equipment And Related Components(1)
• Make Gaskets For Pumps, Housings, Axle Covers, Gear Cases, Split Crankcases And Other Areas Where Conventional Gaskets Are Used. Also Use To Repair Damaged Conventional Gaskets Or As A Coating/Dressing For Conventional Gaskets.(1)
• Low VOC, Replaces Pre Cut Gaskets For A Reliable Seal On Exhaust Manifolds, Timing Chain Covers, And Most Other High Temperature Applications.(1)
• Invades And Insulates Holes, Gaps, And Cracks(1)
• Insulate, Fill Voids And Cavities(1)
• Industrial Furnaces, Ovens, Boilers, Exhaust Stacks, High Temp Ducting, and Heating Elements in Electrical Appliances(1)
• Ideal For Stainless Steel, Aluminum, Galvanized Metal And Other Inert Metals.(1)
• High Temperature, Replaces Pre Cut Gaskets For A Reliable Seal On Exhaust Manifolds, Timing Chain Covers, And Most Other High Temperature Applications.(1)
• Fuel and Water Pumps, Thermostats, Split Crankcases, Gearboxes and Transmission Housings(1)
• Freeze Plugs, Threaded Connections, Air Ducts, Pipe Fittings(1)
• For Window and Door Frames, Will not Bow Frames, Complies with AAMA E-2112(1)
• For Use On Valve Covers And Oil Pan Gaskets, And Threaded Connections(1)
• For Use On Threaded Connections, Air Ducts, And Plumbing Connections(1)
• For Type V Residential Construction(1)
• For Sealing and Holding Gaskets(1)
• For Rigid Flange Assemblies, Speeds Cure of Anaerobics on Inactive Metals(1)
• For Pump Housings, Machine Tools, Compressors, Gearboxes, Transmission Pans, Valve Covers, And Oil Pans(1)
• For Installation Of Carpet, Coverage 40 sq. ft.(1)
• For Flange Sealing On Rigid Flanges Like Transmissions And Cast Metal Housing(1)
• For Applying Drywall(1)
• Fills Gaps Up to 0.010" Unprimed, 0.050" with Primer, Anaerobic Cure will Flex with Minor Flange Movements(1)
• Filling and Sealing Gaps On Pondscaping Projects, Floorboard Penetrations on RVs(1)
• Designed For Bonding Foamboard Insulation(1)
• Commercial Roof Repairs(1)
• Coat Pre-cut Gaskets for Increased Reliability, Fills Gaps Up To 0.25"(1)
• Automotive And Marinegaskets, Valve Covers, Gearbox Covers, Pumps, Compressors, Oil Pans, Thermostat Housings And Water Pumps(1)
• Anaerobic Product Forms a Flexible, Solvent-resistant Seal that Eliminates the Need for Cut Gaskets, Seals to 300 Degree Fahrenheit and Fills Gaps to 0.050" with Primer(1)
• Adheres To Most Surfaces. Easy-To-Dispense Aerosol Can System.(1)

Green Certification or Other Recognition

• RoHS Compliant(4)