Proto

Recent Customer Reviews of Proto:

To help with your decision, here are some reviews that have been submitted by customers like you!

Ratchet Repair Kit for 1AM18, 19, 21, 221

Combination Flare Nut Wrench, SAE1

Ratchet, Reversible, 1/2Dr, 10 In, Chrome 1

Bottle Opener, 6 3/4 In L1

Locking Plier, Straight, 7 In1

Puller Set, 6 Ton, Internal/External1

Socket, Deep, 1/4 In Dr, 6 Pt, 10mm, 22.2mm L1

Adjustable Web Belt1

Torx Screwdriver, T30 Tip, 8 In L1

Pry Bar, Aligning, 30 In, 7/8 In Flat End1

Impact Driver Set1

Torque Wrench, 3/8Dr, 40-200 in.-lb.1

Torque Wrench, 1/2Dr, 50-250 ft.-lb.1

Socket, 1/4 In Dr, 12 Pts, 5/32 In, 7/8 In L1

Dial Torque Wrench, 75 in.-lb., 1/4 in. Dr1

Rolling Tool Cabinet, 27 Wx35 H, 7 Drawer1

Torque Adapter 5/8 In1

Torx Screwdriver, T45 Tip, 10 3/8 In L1

Impact Shank1

Impact Socket, 1/2 Dr, 1 1/2 In, 6 Pt1

• Review of:
  

  Ratchet Repair Kit for 1AM18, 19, 21, 22

  The replacement parts were high quality and nicely finished. To replace the selector lever, which is likely worn inside the wrench, you have to peen the small pin. This can be tricky on the 1/4" socket size wrench. Some of the new parts were too tight to operate smoothly so mixing in some of the ol... Read full review

  by Jeff
  6 months ago

• Review of:
  

  Combination Flare Nut Wrench, SAE

  Someone broke the one in my toolbox, and I wasn't sure that I could replace it, as this was quite vintage. Wasn't at all sure it still was being made. So I was pleasantly surprised when I saw it was available through DrillSpot. The quality seems to be as good as the original. Thanks for carrying it. Read full review

  by c.c.
  6 months ago

• Review of:
  

  Ratchet, Reversible, 1/2Dr, 10 In, Chrome

  I just found the old version of this ratchet at second hand store. It has a very smooth action and is very durable and strong. I'm guessing mine is 25+ years old but it works great. I would definately recommend this to basically anybody!! Read full review

  by brad
  11 months ago

• Review of:
  

  Bottle Opener, 6 3/4 In L

  I am bit of a Proto tools collector and needed a new bottle opener, so this item fit the bill. It is certainly not a must have tool, but it is fun to have in the garage when celebrating a finished job. The quality seems good and it does its job.Read full review

  by gwunsch
  one year ago

• Review of:
  

  Locking Plier, Straight, 7 In

  After being very disappointed with the ones in hardware stores, these pliers are very solid and work quite well. The jaws line up perfectly and don't move from side to side. Read full review

  by invaderzim
  one year ago

• Review of:
  

  Puller Set, 6 Ton, Internal/External

  This is an outstanding product. Everything is well made, very well organized and within seconds, configures from one thing to another. I was working on an evap cooler one time and could not get the pulley off the shaft. I hammered it, I oiled it, I torched it, I put freon on it, (hot/cold) nothin... Read full review

  by Tom Fuller
  one year ago

• Review of:
  

  Socket, Deep, 1/4 In Dr, 6 Pt, 10mm, 22.2mm L

  It was a good quality which fits properly. Read full review

  by rich28
  one year ago

• Review of:
  

  Adjustable Web Belt

  The "product" that I received when I ordered this belt was a pretty shoddy generic web belt. They say its a generic image provided from Stanley Proto, but the Proto website shows the same belt. Either way don't buy it unless its your last resort. Read full review

  by john
  one year ago

• Review of:
  

  Torx Screwdriver, T30 Tip, 8 In L

  This product works great, and very cheap. Read full review

  by Stan
  one year ago

• Review of:
  

  Pry Bar, Aligning, 30 In, 7/8 In Flat End

  Just what I needed in my mechanic business! Read full review

  by Neal
  one year ago

• Review of:
  

  Impact Driver Set

  High quality, American made tool that does what it was made to do. I would not expect more (or less) than that.Read full review

  by Maintenance Master
  one year ago

• Review of:
  

  Torque Wrench, 3/8Dr, 40-200 in.-lb.

  Test Measurement and Diagnostic Equipment (TMDE) specialist set the wrench to zero and a ball bearing fell out and was lost. Before use we are require to send torque wrenches to our TMDE lab for certification. I would not recommend this product.Read full review

  by tick
  one year ago

• Review of:
  

  Torque Wrench, 1/2Dr, 50-250 ft.-lb.

  The price was cheaper than I could get it from Grainger and it shipped from Grainger anyhow! Read full review

  by grs44310
  one year ago

• Review of:
  

  Socket, 1/4 In Dr, 12 Pts, 5/32 In, 7/8 In L

  I was glad to find this hard to find socket after much searching. It is now nestled in with my other 1/4 sockets, ready for use. Looks to be solid quality.Read full review

  by Small socket guy
  one year ago

• Review of:
  

  Dial Torque Wrench, 75 in.-lb., 1/4 in. Dr

  Working as well as I expected. Same as the old wrench I have had in service for a few years. Read full review

  by Roger Moore
  one year ago

• Review of:
  

  Rolling Tool Cabinet, 27 Wx35 H, 7 Drawer

  Very sturdy build. Even though mine arrived damaged, once straightened out, it works perfect. Very rugged and strong. Read full review

  by Stephen Schaefer
  2 years ago

• Review of:
  

  Torque Adapter 5/8 In

  just what I needed and a super fast service Read full review

  by glenn m
  2 years ago

• Review of:
  

  Torx Screwdriver, T45 Tip, 10 3/8 In L

  After shopping locally at all the Big Box Stores (all of our local hardware stores are gone), and couldn't find a T45 torx screwdriver (most tool "experts" said that size wasn't made), Drillspot had the tool I needed. Next time I need a speciality tool, I'll check drillspot first.Read full review

  by weekend-DIY
  2 years ago

• Review of:
  

  Impact Shank

  great to be able to find and purchase this item. Quickly too. Read full review

  by virginia g
  2 years ago

• Review of:
  

  Impact Socket, 1/2 Dr, 1 1/2 In, 6 Pt

  Great impact socket. Arrived quickly and works as advertised. Read full review

  by Luke Bury
  2 years ago