Epoxy, Urethane, and Specialty Coatings

Application Method

• Brush, Roll, Spray(210)
• Spray(21)
• Spray, Towel(6)
• Roll, Squeegee(6)
• Brush, Roll(5)
• Snthetic Brush, Lambswool Applicator, Spray(3)
• Squeegee(2)
• Brush(1)

Size

• 1 gal.(204)
• 5 gal.(41)
• 1 qt.(20)
• 4.25 gal.(8)
• 2 gal.(2)

Exposure Conditions

• Exterior(160)
• Interior/Exterior(81)
• Interior(7)
• Severe Industrial or Marine Environments(4)

Resin Type

• Epoxy(140)
• Epoxy Mastic(19)
• Urethane Mastic(17)
• Chlorinated Rubber(16)
• Acrylic(16)
• Acrylic Elastomeric(15)
• Polyurethane(12)
• Alkyd(11)
• Acrylic Polyester Urethane(8)
• Coal Tar Epoxy(4)
• Polyester Urethane(3)
• Epoxy Acrylic(3)
• Urethane(2)
• Siloxane(2)
• Modified Silicone(2)
• Latex(2)
• Rubber(1)

Item

• Epoxy Activator and Finish Kit(122)
• Paint(26)
• Urethane Activator and Finish Kit(20)
• Epoxy Mastic Coating(16)
• Epoxy Paint(15)
• Elastomeric Acrylic Coating(15)
• Urethane Mastic Coating(8)
• Polyester Urethane Coating(7)
• Topside Paint(6)
• Performance Coating(6)
• Thermal Insulation Coating(4)
• Tub and Tile Refreshing Kit(3)
• Marine Coating(3)
• Graffiti Barrier(3)
• Floor Finish(3)
• Spray Booth Coating(2)
• Lead Encapsulant Coating(2)
• Insulation System(2)
• High Heat Paint(2)
• Coal Tar Epoxy Coating(2)
• Boat Bottom Antifouling Paint(2)
• Urethane Mastic(1)
• Urethane Finish(1)
• Spar Varnish(1)
• Plenum Fan(1)
• Epoxy Coating Activator(1)
• Dry Fall Paint(1)
• Anti Graffiti Activator and Finish Kit(1)

Finish

• Semi-Gloss(120)
• Gloss(59)
• High Gloss(26)
• Flat(21)
• Satin(16)
• Matte(11)
• Urethane Mastic(7)
• Low Sheen(7)
• Metallic(2)
• Clear(2)

UNSPSC

• 31201615(97)
• 31211504(90)
• 31211603(22)
• 31211501(15)
• 31211508(12)
• 31211502(9)
• 31201607(9)
• 31211704(3)
• 31211509(3)
• 31211707(1)
• 31211511(1)
• 30201702(1)

Coverage

• 125 to 225 sq. ft./gal.(95)
• 200 to 350 sq. ft./gal.(16)
• 160 to 280 sq. ft./gal.(16)
• 100 sq. ft./gal.(11)
• 250 to 300 sq. ft./gal.(9)
• 400 to 500 sq. ft./gal.(8)
• 360 to 860 sq. ft./gal.(8)
• 110 sq. ft./gal.(8)
• 230 to 340 sq. ft./gal.(7)
• 180 to 545 sq. ft./gal.(6)
• 80 sq. ft./gal.(4)
• 370 to 790 sq. ft./gal.(4)
• 130 to 215 sq. ft./gal.(4)
• 120 sq. ft./gal.(4)
• 110 sq. ft./gal(4)
• 100 to 130 sq. ft./gal.(4)
• 140 to 220 sq. ft/gal.(3)
• 130 to 220 sq. ft.(3)
• 125 to 225 sq. ft./gal(3)
• Diluted 75 sq. ft./gal.; Undiluted 150 sq. ft./gal.(2)
• 750 sq. ft./gal.(2)
• 500 to 1,000 sq. ft./gal.(2)
• 48 sq. ft./gal.(2)
• 275 sq. ft./gal.(2)
• 260 to 560 sq. ft./gal.(2)
• 260 to 520 sq. ft./gal.(2)
• 250 sq. ft./gal.(2)
• 180 to 225 sq. ft./gal.(2)
• 150 sq. ft./gal.(2)
• 640 to 960 sq. ft./gal.(1)
• 525 to 875 sq. ft./gal.(1)
• 480 to 950 sq. ft./gal.(1)
• 275 to 475 sq. ft./gal.(1)
• 240 to 550 sq. ft.(1)
• 225 sq. ft./gal.(1)
• 220 sq. ft./gal.(1)
• 210 to 260 sq. ft.(1)
• 2000 to 2500 sq. ft./gal.(1)
• 200 to 300 sq. ft.(1)
• 200 to 270 sq. ft./gal.(1)
• 185 to 310 sq. ft./gal.(1)
• 164 to 274 sq. ft./gal.(1)
• 128 to 192 sq. ft./gal.(1)
• 125 to 500 sq. ft./gal.(1)
• 125 to 150 sq. ft./gal.(1)
• 1125 sq. ft./gal.(1)

Base Type

• Solvent(68)
• Water(54)
• Oil(2)

VOC Content

• Less Than250g/L(66)
• Less Than340g/L(59)
• VOC Free(25)
• Depends on Activator Used(16)
• 5g/L(12)
• Less Than570g/L(9)
• Less Than100g/L(9)
• Less Than250 g/L(8)
• 100g/L(7)
• 60g/L(6)
• 340g/L(4)
• Less Than600g/L(3)
• Less Than450g/L(3)
• 25g/L(3)
• 22g/L(3)
• 167g/L(3)
• Less Than150g/L(2)
• 559g/L(2)
• 173g/L(2)
• 150g/L(2)
• Less Than420g/L(1)
• Less Than217g/L(1)
• Less Than164g/L(1)
• 97g/L(1)
• 61g/L(1)
• 562g/L(1)
• 52g/L(1)
• 487g/L(1)
• 464g/L(1)
• 24g/L(1)

Dry Time Recoat

• 16 to 72 hr.(54)
• 24 hr.(31)
• 4 hr.(24)
• 1 to 2 hr.(22)
• 16 to 24 hr.(16)
• 4 to 16 hr.(12)
• 24 to 72 hr.(11)
• 3 to 4 hr.(10)
• 1 to 3 hr.(10)
• 9 to 12 hr.(8)
• 16 hr.(7)
• 24 to 48 hr.(6)
• 2 to 4 hr.(6)
• 24 hr. to 30 days(4)
• 6 hr.(3)
• 24 hr.72 hours at 50 Degrees F (10 Degrees C)(3)
• 1/2 hr.(3)
• 8 to 24 hr.(2)
• 5 hr.(2)
• 1 hr.(2)
• 8 to 72 hr.(1)
• 12 hr.(1)

Color Family

• Grays(50)
• Whites(41)
• Blues(41)
• Reds(31)
• Blacks(30)
• Clears(23)
• Browns(21)
• Yellows(16)
• Greens(11)
• Aluminum / Metallic(11)

Application Temperature

• 50 to 100 Degrees F(47)
• 40 to 100 Degrees F(25)
• 50 to 90 Degrees F(18)
• 60 to 100 Degrees F(15)
• 46 to 130 Degrees F(15)
• 40 to 200 Degrees F(12)
• 32 to 100 Degrees F(10)
• 50 to 95 Degrees F(7)
• 65 to 90 Degrees F(3)
• 60 to 90 Degrees F(3)
• 70 to 80 Degrees F(2)
• 60 to 80 Degrees F(2)
• 60 to 70 Degrees F(2)
• 32 to 125 Degrees F(2)

Dry Time

• 6 to 12 hr.(42)
• 8 to 14 hr.(23)
• 5 hr.(22)
• 2 to 4 hr.(18)
• 1/2 hr.(17)
• 2 to 5 hr.(16)
• 6 to 9 hr.(15)
• 22 to 26 hr.(11)
• 4 to 7 hr.(9)
• 24 hr.(9)
• 1/2 to 1 hr.(9)
• 3 to 6 hr.(8)
• 4 to 6 hr.(6)
• 24 to 48 hr.(6)
• 1 hr.(6)
• 18 to 36 hr.(4)
• 10 to 16 hr.(4)
• 1 to 2 hr.(4)
• 6 to 8 hr.(3)
• 4 hr.(3)
• 2 to 3 hr.(3)
• 15 min.(3)
• 10 to 12 hr., 48 to 72 hr.(3)
• 7 days(2)
• 18 hr.(2)
• 9 to 12 hr.(1)
• 7 to 8 hr.(1)
• 35 min.(1)
• 3 to 4 hr.(1)
• 10 to 13 hr.(1)

Color

• White(37)
• Black(30)
• Silver Gray(24)
• Clear(21)
• Safety Yellow(15)
• Navy Gray(15)
• Dunes Tan(15)
• Safety Blue(14)
• Tile Red(12)
• Aluminum(11)
• Regal Red(10)
• Marlin Blue(10)
• Blue(7)
• Red(5)
• Gray(5)
• Royal Blue(4)
• Ocean Blue(4)
• Teal(3)
• Safety Red(2)
• Oyster White(2)
• Green(2)
• Dark Green(2)
• Crystal Clear(2)
• Almond(2)
• White Pastel(1)
• Tunes Tan(1)
• Stone Gray(1)
• Sand Beige(1)
• Reseda Green(1)
• Off White(1)
• Navy Blue(1)
• Moss Green(1)
• Green Gray(1)
• Gray Green(1)
• Gravel Gray(1)
• English Red(1)
• Deep Green(1)
• Corten Brown(1)
• Caution Yellow(1)
• Bright Red(1)
• Blue Gray(1)
• Biscuit(1)
• Beige Gray(1)
• Battleship Gray(1)
• Aquamarine(1)

Green Environmental Attribute

• VOC Levels Meet SCAQMD Requirements(31)
• Product Contributes To Reducing Energy Consumption(4)

For Use With

• Concrete, Gunnite, Marcite, Pools, Fresh or Salt Water(14)
• 9100 or V9100 System Activators(13)
• 9800 System Activator(8)
• Tennis Courts, Concrete, Asphalt, Bituminous-Based Composition Surfaces, Wood(7)
• Mfr. No. 5301604(7)
• Metal Surfaces(6)
• Aluminum, Steel, Copper, Metal Surfaces(4)
• Aluminum, Galvanized, Metal, Rusted Metal, and Concrete(4)
• 9700 System Activator(4)
• Tennis Courts(3)
• Metal, Masonry, Concrete(3)
• Ceramic Tile, Porcelain, Fiberglass, Acrylic, Cast Iron Bath Tubs and Sinks(3)
• 9400 System Activator 9401402 or HS9401402(3)
• SC9100 System Activator(2)
• Rubber Pool(2)
• Metal(2)
• Masonry Surface(2)
• Drywall,Wood,Concrete,Painted Surfaces(2)
• Concrete, Plastic, Brick, Masonry Surfaces(2)
• Clean Steel, Concrete, Metal Surfaces(2)
• Mfr. No. A910008300(1)
• Metal Surface, Mfr. No. 9801501(1)
• Glass, Plastic, Metal Surfaces(1)
• Concrete, Plastic, Brick, Masonry Surfaces, Mfr. No. EPXK_5GK_B(1)
• Concrete, Plastic, Brick, Masonry Surfaces, Mfr. No. EPX4_5GK_B(1)
• Concrete, Plastic, Brick, Masonry Surface, Mfr. No. EPXK_5GK_A(1)
• Concrete, Plastic, Brick, Masonry Sufaces, Mfr. No. EPX4_5GK_A(1)
• Concrete, Metal, Drywall, Wood and Aluminum(1)

Cure Time

• 7 to 14 days(14)
• 14 days(12)
• 7 days(10)
• 48 hr.(8)
• 24 hr.(3)
• 7 to 10 days(2)

Green Certification or Other Recognition

• Green Seal Certified(7)

Includes

• Base, Activator(3)
• Mfr. No. 258455, 254157(2)
• Activator, Epoxy(2)
• Mfr. No. HS9381407, HS9303604(1)
• Mfr. No. C9502, C9578402(1)
• Mfr. No. 9360402, 9304402(1)
• Drive Package(1)
• Activator(1)

Wheel Material

• Aluminum(1)

Wheel Dia. (In.)

• 13-1/2(1)

Voltage

• 115/208-230(1)

Type

• With Drive Package(1)

Sones @ 0.250-In. SP @ 5 Ft.

• 10.6(1)

Shaft Extension Beyond Frame (In.)

• 2-3/16(1)

Shaft Dia. (In.)

• 1(1)

Shaft Centerline Height (In.)

• 9(1)

Remarks

• Belt Provided is for Typical Motor Mounting Location(1)

Phase

• 1(1)

Mounting Position

• Horizontal(1)

Motor Type

• Split Phase(1)

Motor RPM

• 1725(1)

Motor HP

• 1/4(1)

Motor Enclosure

• Open Dripproof(1)

Max. Wheel RPM

• 1940(1)

Max. Inlet Temp. (Deg. F)

• 104(1)

Max. BHP

• 0.248(1)

Max. Ambient Temp. (F)

• 104(1)

Hz

• 60(1)

Full Load Amps

• 4.6/2.2-2.3(1)

Frame Width (In.)

• 18(1)

Frame Material

• Galvanized(1)

Frame Height (In.)

• 18(1)

Frame Depth (In.)

• 18(1)

Fan RPM

• 1345(1)

CFM @ 1.000-In. SP

• 695(1)

CFM @ 0.750-In. SP

• 1101(1)

CFM @ 0.500-In. SP

• 1318(1)

CFM @ 0.250-In. SP

• 1479(1)

Bearing Type

• Ball(1)