Paint Primer, Sealers & Rust Reformers

Exposure Conditions

• Interior/Exterior(84)
• Interior(21)
• Exterior(7)
• Interior and Spot Exterior Use(5)
• 50 to 100 Degrees F(5)
• All Weather(4)
• Mild to Moderate(1)

Size

• 1 gal.(82)
• 5 gal.(23)
• 1 qt.(15)
• 15 oz.(4)
• 12.5 oz/355 g(2)
• 8 oz.(1)
• 13 oz.(1)
• 12 oz.(1)
• 11 oz.(1)

Item

• Primer(73)
• Primer/Sealer Stain Killer(11)
• Interior/Exterior Paint(5)
• Cold Galvanizing Compound(5)
• Stain Blocking Primer/Sealer(4)
• Rust Converter(4)
• Penetrating Sealer(4)
• Galvanizing Compound(4)
• Sealer(3)
• Rust Inhibitive Primer(3)
• Stain Blocking Primer(2)
• Prefinishing Surface Conditioner(2)
• Epoxy Primer Base(2)
• Binding Primer(2)
• Alkyd Primer(2)
• Zinc Galvanizing Compound(1)
• Urethane Primer(1)
• Multisurface Primer(1)
• Epoxy Primer(1)
• Electrical Sealer(1)
• Adhesive Promoting Primer(1)

UNSPSC

• 31211509(70)
• 31211512(15)
• 31211704(9)
• 31211505(6)
• 31211508(5)
• 31211501(4)
• 31211507(3)
• 31211504(3)
• 47131827(1)
• 31211706(1)
• 31211705(1)
• 31201607(1)
• 15121803(1)

Application Method

• Brush, Roll, Spray(50)
• Brush, Roller, Spray(42)
• Spray(10)
• Brush, Spray(5)
• Brush, Roll or Spray(5)
• Spray, Lint Free Cloth(4)
• Brush, Roller, Pad, Spray(4)
• Roller, Squeegee(2)
• Bulk(2)
• Brush(2)
• Aerosol(2)
• Brush, Sponge(1)
• Brush, Dip, Spray(1)

Base Type

• Solvent(47)
• Oil(39)
• Water(18)
• Zinc Rich(4)
• Waterborne(4)
• Alcohol(4)

Color

• White(46)
• Red(27)
• Gray(25)
• Clear(14)
• Silver Gray(2)
• Silver(2)
• Matte Gray(2)
• Light Gray(2)
• Dunes Tan(2)
• Black(2)
• Amber(2)
• Yellow(1)
• Safety Blue(1)
• Medium Gray(1)
• Flat Yellow(1)
• Flat Red(1)
• Clear or Milky(1)

Application Temperature

• 32 to 100 Degrees F(42)
• Above 50 Degrees F(17)
• 50 to 90 Degrees F(16)
• 50 to 100 Degrees F(8)
• 40 to 90 Degrees F(7)
• 70 Degrees F(6)
• Above Freezing(4)
• 50 to 95 Degrees F(4)
• 40 to 100 Degrees F(4)
• 60 to 100 Degrees F(3)
• 0 to 90 Degrees F(3)
• 65 to 90 Degrees F(2)
• 36 to 90 Degrees F(2)
• 35 to 100 Degrees F(2)
• 18 to 100 Degrees F(2)
• Up to 80 Degrees F(1)
• Up to 400 Degrees F(1)
• Up to 250 Degrees F(1)
• 70 to 80 Degrees F(1)
• 50 Degrees F(1)
• 300 to 800 Degrees F(1)

Resin Type

• Alkyd Enamel(40)
• Latex(14)
• Acrylic Enamel(9)
• Shellac(7)
• Modified Alkyd Enamel(5)
• Phenolic Alkyd Enamel(4)
• Organic(4)
• Acrylic(4)
• Polyamine Epoxy(3)
• Vinyl(2)
• Polyamine Converted Epoxy(2)
• Modified Short Oil Alkyd Enamel(2)
• Enamel(2)
• Silicone(1)
• Polyurethane(1)
• Modified Alkyd(1)
• Latex Acrylic(1)
• Lacquer(1)
• Industrial Enamel(1)
• Epoxy Ester(1)
• Epoxy(1)

Dry Time

• 1 hr.(30)
• 1 to 2 hr.(15)
• 24 hr.(12)
• 5 to 10 hr.(9)
• 6 to 10 hr.(7)
• 2 to 4 hr.(7)
• 8 to 12 hr.(6)
• 4 to 5 hr.(6)
• 45 min.(4)
• 4 to 6 hr.(4)
• 2 hr.(4)
• 15-30 Minutes(4)
• 30 min.(3)
• 240 to 360 min.(3)
• 4 to 7 hr.(2)
• 2 to 5 hr.(2)
• 120 to 240 min.(2)
• 12 hr.(2)
• 1 to 1-1/2 hr.(2)
• 72 hr.(1)
• 6 to 8 hr.(1)
• 4 hr.(1)
• 30 sec.(1)
• 3 to 4 hr.(1)
• 15 to 20 min.(1)
• 1/2 to 1 hr.(1)

Dry Time Recoat

• 24 hr.(29)
• 4 hr.(20)
• 1 hr.(16)
• 1 to 2 hr.(11)
• 2 hr.(10)
• 3 hr.(5)
• 45 min. to 1 hr.(4)
• 30 min.(4)
• 24-48 Hours(4)
• 24 to 48 hr.(4)
• 1 to 3 hr.(4)
• 4 to 6 hr.(3)
• 2 to 4 hr.(3)
• 4 to 7 hr.(2)
• 12 hr.(2)
• 8 to 24 hr.(1)
• 8 hr.(1)
• 35 min.(1)
• 2 to 16 hr.(1)
• 16 to 24 hr.(1)
• 16 hr.(1)
• 15 min.(1)
• 10 to 24 hr.(1)
• 1-1/2 to 2 hr.(1)
• 1 to 1-1/2 hr.(1)

Finish

• Flat(25)
• Gloss(6)
• Semi-Gloss(4)
• Satin or Semi Gloss(4)
• Reflective Metallic Sheen(2)
• Flat Gray Matte(2)
• Primer(1)
• Low Gloss(1)

Dry Time Tack Free

• 30 min.(23)
• 1 hr.(20)
• 3 to 5 hr.(16)
• 30 min. to 1 hr.(14)
• 2 to 4 hr.(9)
• 15 min.(6)
• 1 to 2 hr.(6)
• 8 to 12 hr.(5)
• 4 to 7 hr.(4)
• 15 to 30 min.(4)
• 15 Minutes(4)
• 10 min.(4)
• 40 to 60 min.(2)
• 35 min.(2)
• 10 to 15 min.(2)
• 6 to 12 min.(1)
• 5 sec.(1)
• 5 min.(1)
• 4 to 6 hr.(1)
• 20 to 40 min.(1)
• 15 to 20 min.(1)
• 10 to 24 hr.(1)

VOC Content

• Less Than340g/L(22)
• Less Than450g/L(8)
• Less Than100g/L(8)
• 100g/L(8)
• Less Than250 g/L(7)
• VOC Free(4)
• Less Than250g/L(4)
• Less Than150g/L(4)
• 0g/L(4)
• Less Than550g/L(3)
• 87g/L(3)
• 589g/L(3)
• 400g/L(3)
• Less Than420g/L(2)
• Less Than350g/L(2)
• Less Than335g/L(2)
• 98g/L(2)
• 66g/L(2)
• 4.13 lb/gl(2)
• 399g/L(2)
• 38g/L(2)
• 34g/L(2)
• 335g/L(2)
• 1g/L(2)
• 19g/L(2)
• Less Than650g/L(1)
• Less Than60g/L(1)
• Less Than580g/L(1)
• Less Than50g/L0g/L(1)
• Less Than50g/L(1)
• Less Than45g/L(1)
• Less Than398g/L(1)
• Less Than200g/L(1)
• 99g/L(1)
• 93g/L(1)
• 7.2584 lb/gl(1)
• 680 g/L(1)
• 565g/L(1)
• 550g/L(1)
• 5.21 lb/gl(1)
• 49g/L(1)
• 420g/L(1)
• 350g/L(1)
• 110g/L(1)

Surface

• Metal, Steel, Wood(13)
• Metal and Wood(11)
• Masonry, Wood, Plaster, Stucco, Previously Painted Surfaces(11)
• Metal(9)
• Metal, Steel(8)
• Use on Drywall, Cured Plaster, Cement, Stucco, Wood, Aluminum, PVC, Steel, Galvanized Metal Surfaces(7)
• Wood, Plywood, Masonry, Cement, Composition Panels Surface(4)
• Galvanizing(4)
• Drywall, Cured Plaster, Cement, Stucco, Wood, Aluminum, PVC, Steel, Galvanized Metal Surfaces(4)
• Aluminum, Concrete, Galvanizing, Iron, Masonry, Steel, Wood(4)
• Wood(3)
• Steel, Galvanized Steel, Concrete, Masonry(3)
• Walls, Ceilings, Wood, Plaster, Concrete, Hardboard, Glass, Tile, Steel Surfaces(2)
• Use on Walls, Ceilings, Wood, Plaster, Concrete, Hardboard, Glass, Tile, Steel Surfaces(2)
• New, Uncoated Concrete Floors(2)
• Masonry, Metal, Wood(2)
• Iron, Steel(2)
• For Metal, Wood(2)
• For Any Porous Surface(2)
• Fiberglass, Wood(2)
• Drywall, Plaster, Cement, Concrete, Stucco, Wood, Vinyl, Masonry, or Metal Surface(2)
• Concrete, Metal(2)
• Concrete, Galvanized Steel, Masonry, Metal, Wood(2)
• Ceilings, Doors, Interior Walls, Paintable Surfaces, Railings, Trim(2)
• Bare Sheet Metal, Galvanized Metal, Production Welds(2)
• Any Porous Surface(2)
• Aluminum, Concrete, Galvanized Steel, Masonry, Clean or Sound Steel(2)
• Rusted Steel(1)
• Primed Steel(1)
• Polyolefin, Polypropylene, PTFE, Thermoplastic Rubber Substrates(1)
• Metal, Steel, Fiberglass(1)
• Metal or Wood(1)
• Leather, Wood(1)
• For Porous or Non Porous Surfaces(1)
• For Metal, Galvanized, Concrete, Masonry(1)
• For Metal, Galvanized Steel, Aluminum(1)
• For Masonry, Metal, Wood(1)
• Drywall, Masonry, Concrete(1)
• Concrete, Galvanized Steel, Masonry, Steel(1)
• Concrete, Galvanized Steel, Masonry, Metal, Wood(1)
• Ceilings, Masonry, Metal, Painted Wallboard, Plaster, Wood(1)

Green Environmental Attribute

• VOC Levels Meet SCAQMD Requirements(8)

Coverage

• 385 to 790 sq. ft./gal.(8)
• 100 sq. ft./gal.(8)
• 640 to 960 sq. ft./gal.(7)
• 325 to 695 sq. ft./gal.(7)
• 350 to 450 sq. ft./gal.(6)
• 400 sq. ft./gal.(5)
• 350 to 400 sq. ft./gal.(5)
• 300 to 400 sq. ft./gal.(5)
• 128 to 192 sq. ft./gal.(5)
• 300 to 550 sq. ft./gal.(4)
• 125 to 150 sq. ft./qt(4)
• 330 to 660 sq. ft.(3)
• 255 to 435 sq. ft.(3)
• 250 to 350 sq. ft./gal.(3)
• 200 to 350 sq. ft./gal.(3)
• 200 sq. ft./gal.(3)
• 500 sq. ft./gal.(2)
• 420 to 870 sq. ft./gal.(2)
• 325 to 550 sq. ft./gal.(2)
• 310 to 520 sq. ft./gal.(2)
• 310 to 440 sq. ft./gal.(2)
• 270 to 585 sq. ft./gal.(2)
• 265 to 440 sq. ft.(2)
• 180 to 545 sq. ft./gal.(2)
• 1750 to 2000 sq. ft./gal.(2)
• 160 to 270 sq. ft./gal.(2)
• 644 Square Feet(1)
• 590 to 1175 sq. ft./gal.(1)
• 570 Square Feet(1)
• 45 Square Feet(1)
• 400 to 800 sq. ft./gal.(1)
• 400 to 500 Smooth Surface, 150 to 250 Rough Surface sq. ft.(1)
• 400 to 450 sq. ft./gal.(1)
• 40 to 50 sq. Ft./gal.(1)
• 40 Square Feet(1)
• 340 to 685 sq. ft./gal.(1)
• 325 to 650 sq. ft./gal.(1)
• 325 to 650 sq. ft.(1)
• 315 to 630 sq. ft./gal.(1)
• 300 to 600 sq. ft./gal.(1)
• 290 to 585 sq. ft./gal.(1)
• 275 to 475 sq. ft./gal.(1)
• 260 to 560 sq. ft./gal.(1)
• 260 to 520 sq. ft./gal.(1)
• 25 to 30 sq. ft./gal.(1)
• 22 sq. ft.(1)
• 2,400 sq. in./12 oz. can(1)
• 180 to 260 sq. ft./gal.(1)
• 166 to 333 sq. ft./gal.(1)
• 163 to 326 sq. ft./gal.(1)
• 1500 to 3000 sq. ft./gal.(1)
• 15 sq. ft./gal.(1)
• 1450 to 2925 sq. ft./gal.(1)
• 14 sq. ft./gal.(1)
• 1125 to 1875 sq. ft./gal.(1)
• 1,079 sq. ft./gal.(1)

Standards

• USDA(6)
• USDA Acceptable(5)
• ASTM 780(4)
• OSHA(1)
• Mil-P-26915D(2)
• MIR and VOC Compliant(1)
• MIL-PRF-26915D(1)
• Green Promise Compliant: LEED, Greenguard, Greenguard Children & Schools, CHPS, GreenSeal GS 11 2010, MPI Green Performance(1)
• CFIA Approved(1)
• CFIA(1)
• ASTM D5590 and ASTM D3273(1)
• ABS, CFIA(1)

For Use With

• Concrete and Masonry(5)
• 7400 System Alkyd Enamels(4)
• V7400 System Alkyd Enamels(3)
• Properly Prepared Surfaces in Mild to Moderate Environments(2)
• Mfr. No. 7400 or 9800 System(2)
• Mfr. No. 206164, 206165, 206166, 3725402, 3737402, 3744402, 3764402, 3771402, 3779402, 3782402, 3786402, 3792402, 3769402, 3781402(2)
• Galvanized Material(2)
• Bare Steel(2)
• Any Alkyd Enamels(2)
• Activator(2)
• 2500 System Alkyd Enamels(2)
• V8400 System Alkyd Enamels(1)
• TurboPrime Epoxy Primer Activator 2GXC3(1)
• S6511 Epoxy Primer Activator 6KP54(1)
• Mfr. No, 7600 or 1500 System(1)
• Instant Adhesives(1)
• Industrial Alkyd Oil Based Enamels(1)
• HS9300 System Urethane Activator(1)
• Alkyd Oil Based Enamel(1)
• Acrylic Enamels(1)
• 9100 System Activator 5H951(1)
• 8400 System Alkyd Enamels(1)

Features

• Corrosion and Chemical Resistant(4)
• ASTM 780(4)
• Rust Inhivitive(3)
• Quick Dry(3)
• Odorless(3)
• High Solids Quick Dry(3)
• Aerosol(3)
• Low Odor(2)
• High Solids Coating(2)
• High Performance(2)
• Extends the serviceable life of problem surfaces(2)
• Damp Proof(2)
• Atrium(2)
• Zinc-Chromate(1)
• Zinc Chromate(1)
• Mold and Mildew Proof(1)
• Blocks Odors(1)
• 4200/4300 System Heat Resistant Coating(1)