Average Rating: n/a
$1,283.78 + 3 Business Day Shipping $41.60
Specs
| Item | Pump |
|---|---|
| Type | Centrifugal |
| HP | 2 |
| Phase | 3 |
| Voltage | 208-230/460 |
| Amps | 7.1-6.5/3.3 |
| Inlet (In.) | 1-1/2 |
| Outlet (In.) | 1-1/4 |
| Motor Enclosure | TEFC |
| Housing Material | Cast Iron |
| Impeller Type | Closed |
| Impeller Material | Bronze |
| Max. GPM @ Head (Ft.) | 96 @ 50 |
| Best Efficiency GPM @ Head (Ft.) | 66 @ 70 |
| Min. GPM @ Head (Ft.) | 20 @ 78 |
| Max. Head (Ft.) | 79 |
| Seal Material | Stainless Steel, Buna N Carbon/Ceramic Parts |
| Length (In.) | 17-1/8 |
| Width (In.) | 8-7/8 |
| Height (In.) | 9 |
| Impeller Dia. (In.) | 4-3/8 |
| NEMA/IEC Frame | 56J |
| Motor RPM | 3500 |
| Hz | 60 |
| Service Factor | 1.0 |
| Wetted Materials | CI,BR,Carbon,Ceramic,Buna N,SS |
| Volute Material | Cast Iron |
| Shaft Material | 303 Stainless Steel |
| Max. Liquid Temp. (F) | 212F with Standard Seal, 250F with High Temperature Seal |
| GPM of Water @ 50 Ft. of Head | 96 |
| GPM of Water @ 60 Ft. of Head | 82 |
| GPM of Water @ 70 Ft. of Head | 64 |
| Best Efficiency Range GPM @ Head (Ft.) | 40-96 GPM @ 77-50 Ft |
| Max. Specific Gravity | 1.0 |
| Max. Case Pressure (PSI) | 125 |
| Max. Fluid Viscosity | 40 SSU |
| Inlet Pressure (PSI) | 30 |
| Max. Pressure (PSI) | 125 |
| Duty | Continuous |
| Max. Dia. Solids (In.) | 1/8 |
| Port Rotation | 45 Increments |
| Drain Plug | All Position |
| Manufacturers Warranty Length | 1 Year |
| Application | Booster Service Spraying systems Irrigation Water Circulation Liquid Transfer General Purpose Pumping |
| UNSPSC | 40151503 |
| Weight | 54.000000 |
| SKUs | 1N503 |
Description
Centrifugal Pump, Power Rating 2 HP, Voltage @ 60 Hz 208-230/460 Volts, Current Rating 5.4/2.7 Amps, Impeller Diameter 4 3/8 Inches, Phase Three, Maximum Head 79 Feet, Motor Enclosure TEFC, Outlet 1 1/4 Inches, Inlet 1 1/2 Inches, Service Factor 1.0, Length 17 1/8 Inches, Height 9 Inches, Width 8 7/8 Inches, Water Flow @ 50 Feet of Head 96 GPM, Water Flow @ 60 Feet of Head 82 GPM, Water Flow @ 70 Feet of Head 64 GPM, Bronze Fitted
Restrictions
- Note: 1N497, 1N495, and 1N489 have a high head impeller.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Straight Centrifugal Pumps
- Pumps have continuous-duty motors to handle liquid transfer, water circulation, booster service, irrigation, spray system, jockey pump, and other general-purpose pumping applications. Close-coupled design has back pull-out for easy maintenance. Vent and drain plugs in all positions. Piping is female thread (NPT), except 1N456, 1N459, and 1N458 are 12516 ANSI flat-faced flanges. 3-phase pumps do not have overload protection, which must be provided in starter units, sold separately. Pump control box sold separately; see page 4048. UL Listed and CSA Certified. 3- to 20-HP motors: Max. case working pressure is 175 psig; max. suction pressure is 100 psig; discharge can be rotated in 90 increments. Renewable bronze wear ring. Blue baked-on electrocoat paint finish. 1/3- to 2-HP motors: Max. case working pressure is 125 psig, except as noted below; discharge can be rotated in 45 increments, except as noted below. Motors are 3500 rpm with NEMA 56J frame, except ODP 3CCV8 is 3500/2900 rpm, 90 increments; TEFC 2VRU2, 2VRU3, 2VRU4, 2VRU5, 2VRT9, and 2VRU1 are 3450 rpm with NEMA 143 frame, 4 position increments; and TEFC 3CCV7 3500/2900 rpm, 90 increments.
- Cast-iron housing, bronze impeller 300 series stainless steel shaft and sleeve Mechanical shaft seal with stainless steel, Buna N, carbon/ceramic parts Max. liquid temp.: 212 F (100 C)
