Average Rating: n/a
$488.42
+ 3 Business Day Shipping $16.38
Specs
| Item | Oil Coolant Pump |
|---|---|
| Type | Suction |
| HP | 1/12 |
| Phase | 3 |
| Amps | 0.35/0.175 |
| Voltage | 230/460 |
| Length (In.) | 8-3/8 |
| Width (In.) | 5-3/16 |
| Height (In.) | 8-1/8 |
| Bolt Circle Dia. (In.) | 5.2 |
| Inlet/Outlet (In.) | 3/8 |
| RPM | 3440 |
| GPM of Water @ 5 Ft. of Head | 8.3 |
| GPM of Water @ 7 Ft. of Head Low | 8.0 |
| GPM of Water @ 10 Ft. of Head | 5.9 |
| GPM of Water @ 13 Ft. of Head Low | 5.3 |
| GPM of Water @ 15 Ft. of Head | 4.7 |
| GPM of Water @ 16 Ft. of Head | 3.4 |
| Shut-Off (Ft.) | 19 |
| Impeller Material | Cast Bronze |
| Body Material | Cast Iron |
| Max. Recommended Viscosity | 800 at 50 hz, 300 at 60 hz |
| Max. Temp. | 104 |
| Shaft Material | Carbon Steel |
| Shaft Seal | Mechanical Seal |
| Elastomer | Buna N |
| Application | Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Except Grinders |
| Includes | Ceramic stationary seal face, carbon graphite rotating seal face, and steel springs |
| UNSPSC | 40151504 |
| Weight | 15.200000 |
| SKUs | 3P727 |
Description
Oil Coolant Pump, Self Priming, HP 1/12, Phase 3, Amps 0.35/0.175, Voltage 230/460, Length 8 3/8 In., Width 5 3/16 In., Height 8 1/8 In., Inlet/Outlet 3/8 In., RPM 3440, GPM of Water @ 5 Ft. of Head 8.3, 19, Max. Recommended Viscosity 800 at 50 hz, 300 at 60 hz, Max. Temp. 104
Coolant Pumps
- Suction
- Fuji
- Mount above liquid level in all locations. Feature mechanical seals with carbon/ceramic shaft seal, Buna N elastomers, and steel springs. Use with all types of machines, except grinders.
- Pumps circulate coolant and spray cutting oil. For replacement filters, see page 4108.
- Max. fluid temp.: 104 F Max. viscosity: 340 SSU Max. suction lift: 2.3 ft.
- 3450 rpm motors Cast-iron bodies and volutes
