Product Information
| Item | Circulator Pump |
|---|---|
| Type | Open Loop System |
| HP | 1/12 |
| Phase | Single |
| Voltage | 115 |
| Amps | 1.40 |
| Inlet/Outlet | Flanged |
| Housing Material | Bronze |
| Face to Face Dimension (In.) | 6-3/8 |
| Max. Temp. (F) | 225 |
| Max. Working Pressure (PSI) | 150 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 24 |
| RPM | 2650 |
| Impeller Material | Non-metallic |
| Shaft Material | Steel |
| Thermal Protection | Auto |
| GPM of Water @ 1 Ft. of Head | 30 |
| GPM of Water @ 2 Ft. of Head | 27 |
| GPM of Water @ 3 Ft. of Head | 27 |
| GPM of Water @ 4 Ft. of Head | 26 |
| GPM of Water @ 5 Ft. of Head | 26 |
| GPM of Water @ 6 Ft. of Head | 24 |
| GPM of Water @ 7 Ft. of Head | 23 |
| GPM of Water @ 8 Ft. of Head | 22 |
| GPM of Water @ 9 Ft. of Head | 22 |
| GPM of Water @ 10 Ft. of Head | 21 |
| GPM of Water @ 11 Ft. of Head | 18 |
| GPM of Water @ 12 Ft. of Head | 17 |
| GPM of Water @ 13 Ft. of Head | 14 |
| GPM of Water @ 15 Ft. of Head | 13 |
| GPM of Water @ 18 Ft. of Head | 9 |
| GPM of Water @ 20 Ft. of Head | 7 |
| Length (In.) | 8-5/8 |
| Width (In.) | 4-3/8 |
| Feet of Head @ 3 GPM | 23 |
| Feet of Head @ 4 GPM | 22 |
| Feet of Head @ 5 GPM | 21 |
| Feet of Head @ 6 GPM | 20 |
| Feet of Head @ 7 GPM | 19 |
| Feet of Head @ 8 GPM | 18 |
| Feet of Head @ 9 GPM | 17.5 |
| Feet of Head @ 10 GPM | 17 |
| Feet of Head @ 12 GPM | 15 |
| Feet of Head @ 15 GPM | 13 |
| Feet of Head @ 18 GPM | 12 |
| Feet of Head @ 20 GPM | 10 |
| Feet of Head @ 25 GPM | 5 |
| Max. GPM @ Head (Ft.) | 30 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 15 @ 13 |
| Min. GPM @ Head (Ft.) | 7 @ 20 |
| Drive Type | Direct |
| Bearing Type | Ball |
| Mechanical Seal | Carbon/Silicon Carbide |
| Manufacturers Warranty Length | 1 Year |
| Weight | 13.00 |
The Bell & Gossett PL-30B Circulator Pump is designed for use in domestic hot water recirculation, solar thermal heating, and heat recovery systems. This pump’s solid “stiff-shaft” design is constructed of high-strength alloy steel impervious to cracking caused by thermal stresses, assuring dependable seasonal start-ups and durability in difficult water conditions. Features include permanently lubricated ball bearings; close-coupled, direct-drive motor design; a solid steel shaft; and a nonmetallic impeller.
Product Tags
More Products
