Average Rating: n/a
$1,331.09
+ 3 Business Day Shipping $42.25
Specs
| Item | Circulator Pump |
|---|---|
| Type | Closed Loop |
| Series | LD |
| Style | 3-Piece Oil-Lubricated Booster |
| Speed | 1 |
| HP | 1/4 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 3.00 |
| Inlet/Outlet | 3" Flanged |
| Housing Material | Cast Iron |
| Face to Face Dimension (In.) | 10 |
| Flange/Union Included | Yes |
| Shut-Off (Ft.) | 16 |
| Thermal Protection | Auto |
| GPM of Water @ 2 Ft. of Head | 68 |
| GPM of Water @ 3 Ft. of Head | 65 |
| GPM of Water @ 4 Ft. of Head | 60 |
| GPM of Water @ 5 Ft. of Head | 97 |
| GPM of Water @ 6 Ft. of Head | 52 |
| GPM of Water @ 7 Ft. of Head | 47 |
| GPM of Water @ 8 Ft. of Head | 43 |
| GPM of Water @ 9 Ft. of Head | 35 |
| GPM of Water @ 10 Ft. of Head | 65 |
| GPM of Water @ 15 Ft. of Head | 17 |
| Length (In.) | 17-1/4 |
| Width (In.) | 7-9/16 |
| Feet of Head @ 5 GPM | 16 |
| Max. GPM @ Head (Ft.) | 68 @ 2 |
| Best Efficiency GPM @ Head (Ft.) | 65 @ 11 |
| Feet of Head @ 6 GPM | 15 |
| Feet of Head @ 7 GPM | 15 |
| Min. GPM @ Head (Ft.) | 17 @ 15 |
| Feet of Head @ 8 GPM | 15 |
| Feet of Head @ 9 GPM | 15 |
| Feet of Head @ 10 GPM | 15 |
| Feet of Head @ 12 GPM | 15 |
| Feet of Head @ 15 GPM | 15 |
| Feet of Head @ 18 GPM | 15 |
| Feet of Head @ 20 GPM | 14 |
| Feet of Head @ 25 GPM | 14 |
| Feet of Head @ 30 GPM | 14 |
| Feet of Head @ 40 GPM | 13 |
| Feet of Head @ 50 GPM | 12 |
| Feet of Head @ 60 GPM | 11 |
| Feet of Head @ 70 GPM | 9 |
| Feet of Head @ 80 GPM | 8 |
| Feet of Head @ 90 GPM | 6 |
| Feet of Head @ 100 GPM | 4 |
| UNSPSC | 40151504 |
| Weight | 55.000000 |
| SKUs | 4RC99 |
Description
Circulator Pump, 1/4 HP, 1 Phase, Voltage 115, 3.00 Amps, Inlet/Outlet 3 In Flanged, Housing Material Cast Iron, Shut-Off 16 Ft., Auto Thermal Protection
Hot Water Circulating Pumps
- 1-phase models are thermally protected Cast-iron units are not for potable water
- 3-Pc., Oil-Lubricated Booster
- Flexible spring-design coupler permits quiet operation. Sleeve bearings constantly circulate oil over bearing surfaces. Mechanical seal. Close centrifugal impeller/body tolerances minimize water slippage.
- Max. working pressure: 125 psi Max. working temp.: 225 F
