Average Rating: n/a
$738.90 + 3 Business Day Shipping $39.00
Specs
| Item | Centrifugal Pump |
|---|---|
| Type | Self-Priming |
| HP | 1 |
| Phase | 3 |
| Voltage | 208-230/460 |
| Amps | 4.4-4.2/2.1 |
| Hz | 60 |
| Inlet (In.) | 1-1/2 |
| Outlet (In.) | 1-1/2 |
| Suction Lift (Ft.) | 25 |
| Length (In.) | 19-3/4 |
| Width (In.) | 8-1/4 |
| Height (In.) | 9-1/4 |
| GPM @ 10 PSI | 60 |
| GPM @ 15 PSI | 56 |
| GPM @ 20 PSI | 53 |
| GPM @ 25 PSI | 47 |
| GPM @ 30 PSI | 43 |
| GPM @ 35 PSI | 38 |
| GPM @ 40 PSI | 29 |
| GPM @ 45 PSI | 18 |
| Shut-Off (Ft.) | 118 |
| Max. Pressure (PSI) | 51 |
| Best Efficiency GPM @ Head (Ft.) | 50 @ 55 |
| Best Efficiency Range GPM @ Head (Ft.) | 40-60 GPM @ 80-30 Ft. |
| Motor Enclosure | ODP |
| NEMA/IEC Frame | 56J |
| RPM | 3500 |
| Service Factor | 1.15 |
| Wetted Materials | CI, Noryl, Lexan, Carbon, Ceramic and Buna |
| Housing Material | Cast Iron |
| Impeller Material | Noryl |
| Volute Material | Cast Iron |
| Seal Type | Mechanical Shaft |
| Seal Material | Carbon, Ceramic,Buna |
| Seal Application | Water |
| Shaft Material | Stainless Steel |
| Screw Material | Steel |
| GPM of Water @ 2 Ft. of Head | 140 |
| Max. Specific Gravity | 1.0 |
| Max. Case Pressure (PSI) | 125 |
| Max. Fluid Viscosity | 40 SSU |
| Inlet Pressure (PSI) | 25 |
| Impeller Type | Closed |
| Duty | Continuous |
| Max. Dia. Solids (In.) | 1/16 |
| Port Rotation | TOP |
| Drain Plug | 3/8" |
| Agency Compliance | UL/CSA |
| Manufacturers Warranty Length | 1 Year |
| Characteristics | Once Primed, Pump Stays Primed, Casing Design Prevents the Seal from Running Dry, Back Pull Out for Ease of Maintenance, Continuous Duty |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | For Lawn Sprinkling, Irrigation, Air Conditioning Systems, Heat Pump and Water Transfer |
| UNSPSC | 40151503 |
| Weight | 50.000000 |
| SKUs | 6MR23 |
Description
Centrifugal Pump, Power Rating 1 HP, Voltage @ 60 Hz 208-230/460 Volts, Full Load Amps 4.0-3.6/1.8, Motor Enclosure ODP, Phase Three, NPT Inlet 1 1/2 Inches, Outlet Port 1 1/2 Inches, Length 19 3/4 Inches, Height 9 1/4 Inches, Width 8 1/4 Inches, Self Priming
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Self-Priming Lawn Sprinkler/Booster Pumps
- Goulds
- 1-phase capacitor-start models have built-in overload protection with automatic reset. 3-phase units do not have overload protection and require a pump control box, sold separately on page 4048.
- Pumps hold prime for efficient water transfer.
- Max. fluid temp.: 140 F Max. casing pressure: 125 psi
- Cast-iron housings
