Average Rating: n/a
$620.66 + 3 Business Day Shipping $14.30
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| HP | 1/12 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 1.70 |
| Inlet/Outlet | Flanged |
| Housing Material | Bronze |
| Face to Face Dimension (In.) | 6-1/2 |
| Max. Temp. (F) | 230 |
| Max. Working Pressure (PSI) | 145 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 30 |
| RPM | 2800 |
| Impeller Material | PES Composite |
| Shaft Material | Aluminum Oxide Ceramic |
| Thermal Protection | Auto |
| GPM of Water @ 1 Ft. of Head | 26.5 |
| GPM of Water @ 2 Ft. of Head | 25.5 |
| GPM of Water @ 3 Ft. of Head | 24 |
| GPM of Water @ 4 Ft. of Head | 23 |
| GPM of Water @ 5 Ft. of Head | 22.5 |
| GPM of Water @ 7 Ft. of Head | 21 |
| GPM of Water @ 10 Ft. of Head | 17 |
| GPM of Water @ 13 Ft. of Head | 15.5 |
| GPM of Water @ 15 Ft. of Head | 14 |
| GPM of Water @ 20 Ft. of Head | 10.5 |
| GPM of Water @ 25 Ft. of Head | 6.5 |
| Length (In.) | 6-1/2 |
| Width (In.) | 4-1/8 |
| Max. GPM @ Head (Ft.) | 26.5 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 12 @ 18 |
| Min. GPM @ Head (Ft.) | 6.5 @ 25 |
| Drive Type | Direct |
| Bearing Type | Carbon/Thrust |
| Mechanical Seal | Wet Rotor |
| Construction | Bronze |
| Manufacturers Warranty Length | 2 Years |
| Compliance | Certified For Use in Potable Water Applications in CA and VT |
| Includes | Flange Bolts And Gaskets |
| UNSPSC | 40151504 |
| Weight | 12.000000 |
| SKUs | 4HY99 |
Description
Circulator Pump, Open Loop System, 1/12 HP, 1 Phase, Voltage 115, 1.70 Amps, Inlet/Outlet Flanged, Housing Material Bronze, Max. Temp. 230 F, Max. Working Pressure 145 PSI, Shut-Off 30 Ft., 2800 RPM, Impeller Material PES Composite, Auto Thermal Protection, Mechanical Seal Wet Rotor, Warranty Length 2 Years
Hot Water Return Pumps
- 15E562 to 15E573 are 3-speed pumps for most heating and recirculation applications that require high head and moderate flow. 19H332 to 19H339 MAGNA pumps automatically adapt to changes in system requirements and feature an energy-efficient permanent magnet motor.
- Max. working pressure: 145 psi, except 19H336 to 19H339 are 175 psi Maintenance-free Water lubricated can and rotor system 115V, except 2CGL7, 2CGL9, 2CGN2, 2CGN4, and 19H336 to 19H339 are 230V and 19H332 to 19H335 are 208-230V Flanges sold separately
- Bronze/Stainless Steel, Open-Loop
- Designed for open systems, such as domestic hot water recirculation, solar thermal heating, and heat recovery systems. Flange models include nuts, bolts, and gaskets. Line cord models are fast and easy to install with no hard wiring required. Threaded connections on 2DDY6 and 2DDY7 are adapted to piping systems using threaded half union kit 2P312, sold separately.
