Average Rating: n/a
$982.62
+ 3 Business Day Shipping $26.65
Specs
| Item | Pump |
|---|---|
| Type | Magnetic Drive |
| HP | 1/2 |
| Voltage | 115/230 |
| Full Load Amps | 11.60/5.80 |
| Motor Type | PSC |
| Motor Enclosure | TEFC |
| GPM of Water @ 6 Ft. of Head | 38.0 |
| GPM of Water @ 9 Ft. of Head | 36.2 |
| GPM of Water @ 15 Ft. of Head | 34.0 |
| GPM of Water @ 18 Ft. of Head | 33.1 |
| GPM of Water @ 24 Ft. of Head | 30.5 |
| GPM of Water @ 40 Ft. of Head | 21.6 |
| GPM of Water @ 50 Ft. of Head | 2.0 |
| Max. Head (Ft.) | 51 |
| Length (In.) | 15-1/4 |
| Width (In.) | 8-3/4 |
| Height (In.) | 7 |
| Temp (F) @ 0 PSIG | 180 |
| Temp (F) @ 10 PSIG | 175 |
| Temp (F) @ 20 PSIG | 170 |
| Temp (F) @ 30 PSIG | 165 |
| Operating Pressure (PSI) | 22.0 |
| Housing | PPS |
| Impeller | PPS |
| Max. Specific Gravity | 1.1 |
| Max. Viscosity | 100 SSU |
| Mounting | Horizontal |
| Bearings | Thrust |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Gasket | FKM |
| Series | MD-HC |
| For Use With | Highly Corrosive Chemicals |
| Application | For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
| UNSPSC | 40151503 |
| Weight | 31.000000 |
| SKUs | 4RL35 |
Description
Magnetic Drive Pump, Power Rating 1/2 HP, Voltage @ 60 Hz 115/230, Current Rating 11.6/5.8 Amps, Outlet 3/4 Inch MPT, Inlet 1 Inch FPT, Maximum PSI 22, Maximum Head 51 Feet, Motor Enclosure TEFC, Maximum Temperature 200 F @0 PSI, 150 F @ 40 PSI, Water Flow @ 6 Foot of Head 38.0 GPM, @ 9 Feet of Head 36.2 GPM, @ 15 Feet of Head 34 GPM, @ 18 Feet of Head 33.1 GPM, Height 7 Inches, Length 15 1/4 Inches, Width 8 3/4 Inches
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Magnetic Drive Pumps
- Eliminate seal-caused friction loss, wear, contamination, and leakage. All are nonsubmersible, except 4RL36 can be used submersed or inline. Mount horizontally.
- Max. specific gravity: 1.1 Max. viscosity: 100 SSU
- MD-HC Series For Highly Corrosive Chemicals
- Pumps handle liquids such as photographic and plating solutions, acids, alkalis, brines, and distilled water. Ryton pump housing and impeller, Viton O-ring gasket, and encapsulated ceramic magnet. Motors have 6-ft., 3-conductor SJO cords with 3-prong plugs, except 4RL34, 4RL35, and 2P044 must be field-wired.
