Average Rating: n/a
$500.00 + 3 Business Day Shipping $31.53
Specs
| Item | Convertible Jet Pump |
|---|---|
| Material of Construction | Thermoplastic |
| HP | 1 |
| Voltage | 115/230 |
| Amps | 15.6/7.8 |
| Inlet | 1-1/4" NPT |
| Outlet | 1" NPT |
| GPM of Water @ 10 Ft @ 30, 50 PSI | 19.2/10.2 |
| GPM of Water @ 20 Ft @ 30, 50 PSI | 12.2/5.4 |
| GPM of Water @ 30 Ft @ 30, 50 PSI | 9.2/7.2 |
| GPM of Water @ 40 Ft @ 30, 50 PSI | 8.9/6.1 |
| GPM of Water @ 50 Ft @ 30, 50 PSI | 7.9/5.0 |
| GPM of Water @ 60 Ft @ 30, 50 PSI | 7.9/4.7 |
| GPM of Water @ 70 Ft @ 30, 50 PSI | 7.5/3.7 |
| GPM of Water @ 80 Ft @ 30, 50 PSI | 7.0/4.2 |
| GPM of Water @ 90 Ft @ 30, 50 PSI | 3.9/1.1 |
| Suction Lift (Ft.) | 100 |
| Max. Case Pressure (PSI) | 141 |
| Shut Off (PSI) | 66 |
| Motor Enclosure | ODP |
| Max. Inlet Pressure (PSI) | 75 |
| Seal Type | Mechanical |
| Length (In.) | 19 |
| Width (In.) | 12 |
| Height (In.) | 12 |
| Pressure Switch Setting | 30 to 50 psi |
| Includes | Pressure Gauge, Requires Ejector Sold Separately (see accessories depending on application) |
| UNSPSC | 20141301 |
| Weight | 38.500000 |
| SKUs | 4HEZ6 |
Description
Convertible Jet Pump, Material of Construction Thermoplastic, 1 HP, Voltage 115/230, Amps 15.6/7.8, Inlet 1-1/4 In. NPT , Outlet 1 In. NPT, Suction Lift (Ft.) 100, Max. Case Pressure (PSI) 141, Shut Off (PSI) 66, Motor Enclosure ODP, Max. Inlet Pressure (PSI) 75, Includes Pressure Gauge, Requires Ejector Sold Separately (see accessories depending on application)
Convertible Jet Pumps
- Thermoplastic
- All wettable parts resist corrosives and abrasives found in most wells. Built-in regulator with pressure gauge included sets drive pressure in deep well. Stainless steel shafts. Drain plugs prevent freezing. Shallow or deep wells to 110 ft. depth of water require separate ejectors.
- Fiberglass thermoplastic bodies Noryl plastic impellers Reinforced polypropylene impeller diffusers; stainless steel shafts
- Convertible Well Jet Pumps and Systems
- Can be used for shallow well or deep well applications depending on the ejector selected, sold separately this page. Pressure switches factory set at 30 to 50 psi.
- Max. operating temp.: 95 F (thermoplastic); 90 F (cast-iron) Capacitor-start, 115/230V motors
