Average Rating: n/a
$486.97 + 3 Business Day Shipping $21.05
Specs
| Item | Booster Pump |
|---|---|
| Motor Enclosure | TEFC |
| Housing Material | Stainless Steel |
| HP | 3/4 |
| Phase | 1 |
| Voltage | 115 |
| Amps | 6.1 |
| Hz | 60 |
| Inlet (In.) | 1 |
| Outlet (In.) | 1 |
| GPM @ 15 PSI | 18.1 |
| GPM @ 20 PSI | 15.9 |
| GPM @ 25 PSI | 12 |
| GPM @ 30 PSI | 8.8 |
| Max. Pressure (PSI) | 39.2 |
| Suction Lift (Ft.) | 25 |
| Max. Case Pressure (PSI) | 75 |
| Max. PSI Boost @ 2-10 GPM | 39.2 |
| Max. PSI Boost @ 20 GPM | 15.9 |
| Max. PSI Boost @ 30 GPM | 8.8 |
| Max. GPM @ PSI | 25.1 @ 39.2 |
| Best Efficiency GPM @ PSI | 15.4 @ 20 |
| Min. GPM @ PSI | 25.1 @ 39.2 |
| Pressure Range (PSI) | 0-39.2 |
| Best Efficiency GPM @ Head (Ft.) | 15.4 @ 45 |
| Best Efficiency Range GPM @ Head (Ft.) | 15-16 GPM @ 34-56.5 Ft |
| Motor RPM | 3450 |
| Motor Type | PSC |
| Duty | Continuous |
| Wetted Materials | Thermoplastic,CI,416 SS,Buna N,Carbon,Ceramic,BR |
| Impeller Material | Thermoplastic |
| Impeller Type | Closed |
| Diffuser Material | Cast Iron |
| Seal Material | Buna |
| Seal Type | Mechanical Seal |
| Shaft Material | Stainless Steel |
| Seal Application | Clear Water Below 200 PSI |
| Max. Liquid Temp. (F) | 90 |
| Min. Inlet Flow Required | 25.1 |
| Max. Inlet Pressure (PSI) | 50 |
| Stages | 2 |
| Max. Dia. Solids (In.) | 1 |
| Max. Fluid Viscosity | 100 SSU |
| Plug or Connector Type | Direct Wire |
| Pressure Switch Setting | 14.5-45 |
| Length (In.) | 17 |
| Width (In.) | 10 |
| Height (In.) | 18 |
| Motor Ambient Temp. Rating | 65C/149F |
| Service Factor | 1.1 |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | Home Water System |
| Agency Compliance | CSA CUS |
| Manufacturers Warranty Length | 1 Year |
| UNSPSC | 40151503 |
| Weight | 22.380000 |
| SKUs | 4HFA7 |
Description
Booster Pump, Housing Material Stainless Steel, 3/4 HP, 1 Phase, Voltage 115, 6.1 Amps, Inlet 1 In., Outlet 1 In., Max. Case Pressure 75 PSI, Impeller Material Thermoplastic, Impeller Type Closed, Max. Liquid Temp. 90 F, Stages 2, Max. Dia. Solids 1 In., Pressure Switch Setting 14.5-45, Service Factor 1.1, For Use With Nonflammable Liquids Compatible with Pump Component Materials, Agency Compliance CSA CUS, Warranty Length 1 Year
Stainless Steel Pressure Boosting Pumps
- For boosting water pressure in a home water system. 2-stage impeller design increases pump performance. Stainless steel body and thermoplastic impellers resist corrosion. Suction lift up to 25 ft.
- Max. case pressure: 75 psi Motor enclosure: TEFC
