Average Rating: n/a
$283.54 + 3 Business Day Shipping $17.75
Specs
| Item | Pump |
|---|---|
| Type | Coolant |
| HP | 1/8 |
| Phase | 3 |
| Amps | 0.4 |
| Voltage | 230 |
| Length (In.) | 5-13/16 |
| Width (In.) | 5-1/2 |
| Height (In.) | 14-1/16 |
| Dia. (In.) | 5-9/16 |
| Discharge Port (In.) | 3/4 |
| Inlet/Outlet (In.) | 3/4 |
| RPM | 1750 |
| Motor Type | 3 Phase |
| Motor Enclosure | TEFC |
| GPH of Water @ 1 Ft. of Head | 750 |
| GPH of Water @ 2 Ft. of Head | 717 |
| GPH of Water @ 3 Ft. of Head | 677 |
| GPH of Water @ 5 Ft. of Head | 588 |
| GPH of Water @ 8 Ft. of Head | 388 |
| GPH of Water @ 9 Ft. of Head | 276 |
| GPM of Water @ 1 Ft. of Head | 12.5 |
| GPM of Water @ 3 Ft. of Head | 11.3 |
| GPM of Water @ 5 Ft. of Head | 9.8 |
| GPM of Water @ 6 Ft. of Head | 9 |
| GPM of Water @ 7 Ft. of Head Low | 7.8 |
| GPM of Water @ 9 Ft. of Head | 4.6 |
| Shut-Off (Ft.) | 10 |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 8 |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 4.4 |
| Min. Immersion Depth (In.) | 2 |
| Max. Immersion Depth (In.) | 6-3/8 |
| Nominal Tank Depth (In.) | 8 |
| Impeller Material | 304 SS |
| Body Material | Cast Iron |
| Max. Recommended Viscosity | 500 SSU |
| Max. Temp. | 200 F |
| Shaft Material | Stainless Steel |
| Shaft Seal | Nitrile Butadiene Rubber |
| Application | For Machining Lubricants, Coolants, Flushing and Circulation |
| For Use With | Non-Flammable Liquids Compatible with Pump Component Materials |
| UNSPSC | 40151504 |
| Weight | 17.300000 |
| SKUs | 4JPH4 |
Description
Pump, Coolant, HP 1/8, Phase 3, Amps 0.4, Voltage 230, Length 5 13/16 In., Width 5 1/2 In., Height 14 1/16 In., Inlet/Outlet 3/4 In., RPM 1750, Motor Enclosure TEFC, GPM of Water @ 1 Ft. of Head 12.5, GPM of Water @ 3 Ft. of Head 11.3, GPM of Water @ 5 Ft. of Head 9.8, GPM of Water @ 9 Ft. of Head 4.6, 10, Max. Immersion Depth 6 3/8 In., Max. Recommended Viscosity 500 SSU, Max. Temp. 200 F
Evaporative Cooler/Machine Coolant Pumps
- Coolant Pumps, Cast-Iron
- Used for machining lubricants, coolants, flushing, and circulation. Mounting brackets (sold separately) clamp to pump column at desired position for optimal pump depth.
- Max. temp.: 200 F Max. viscosity: 500 SSU 1750 rpm, TEFC motors 304 stainless steel impeller, carbon steel shaft (4JPH3 and 4JPH4 have stainless steel shaft)
