Average Rating: n/a
$2,666.90 + 3 Business Day Shipping $200.85
Specs
| Item | Automatic Standby Generator |
|---|---|
| Engine Cooling Method | Air |
| kW | 7 |
| kVA Rating | 7 |
| Voltage | 120/240 |
| Height | 34-1/4" |
| Width | 38-1/2" |
| Length | 32" |
| Enclosure Material | Steel |
| Fuel Type | Natural Gas/ LP |
| Engine Brand | Briggs and Stratton |
| Engine Size | 504cc |
| Engine RPM | 3600 |
| Amps @ 120/240V, 1 Phase | LP 58 3/29 (NG 50/25) |
| NG Consumption @ Half Load | 80 cu. ft./hr. |
| LP Consumption @ Half Load | 0.91 gph |
| Hz | 60 |
| Sound Level dBA | 82 |
| Automatic Volts Regulation | Yes |
| Battery Included | No |
| 12VDC Battery Charger | Yes |
| Battery Requirements | 350 CCA |
| Engine (Block Heater) | Yes |
| Fault Indicator Lights | Yes |
| Fuel NPT Pipe Connection Sz. | 3/4" |
| High Temp. Alarm | Yes |
| Low Oil Pressure Alarm | Yes |
| Min. Gas Pressure @ Generator (In WC) | 5 to 7 NG/11 to 14 LP |
| Over Crank Protection | Yes |
| Phase | 1 |
| Power Factor | 1 |
| Repeat of Exercise Cycle | 7 Days |
| Run Time Hour Meter | Yes |
| Over Speed | Yes |
| Standards | UL2200 |
| UNSPSC | 26111604 |
| Weight | 299.000000 |
| SKUs | 4KCG7 |
Description
Automatic Standby Generator, Engine Cooling Air, 7 kW, 7 kVA Rating, Voltage 120/240, Height 34-1/4 In., Width 38-1/2 In., Length 32 In., Enclosure Material Steel, Fuel Type Natural Gas/ LP, Briggs and Stratton Engine Brand, Engine Size 504cc, Engine RPM 3600, Amps @ 120/240V, 1 Phase LP 58 3/29 (NG 50/25), NG Consumption @ Half Load 80 cu. ft./hr., LP Consumption @ Half Load 0.91 gph, 60 Hz, Sound Level dBA 82Automatic Volts Regulation Yes, Battery Included No, 12VDC Battery Charger Yes
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer.
Air-Cooled Automatic Standby Generators
- Include charger, hour meter, installation pad, and engine prefilled with synthetic oil. All models require a battery (not included). Combining 7kW unit with transfer switch 4KCG3 (sold separately, this page) provides selected circuit power to meet basic needs. Combining 10kW to 20kW unit with transfer switch 4KCG5 or 4KCG6 (sold separately on this page) allows control of entire panel, in addition to central air conditioners; up to two 3-ton (10kW), two 4-ton (12 to 15kW), or two 5-ton (16 to 20kW) with Air Conditioning Control Module (ACCM). ACCM allows air conditioning to start only when power is available, eliminating the chance of overload. Intelligent load control center can be added to manage up to 4 additional high-wattage home appliances.
- UL 2200 Listed and Approved. Meet EPA standards in all 50 states.
- 120/240V single-phase output Run on natural (NG) or liquid propane (LP) gas
