|Item||Traffic Zone Striping Paint|
|Coverage||400 Linear ft./4" Strip|
|Dry Time||2 to 3 hr.|
|Dry Time Tack Free||20 min.|
|Application Temperature||40 to 90 Degrees F|
|Application Method||Brush, Roll, Spray Machine|
|Surface||Asphalt, Concrete, Brick Surface|
|Exposure Conditions||Mild to Moderate|
|For Use With||Marking Guns|
- Hazardous Material
- Heavy-duty, high-viscosity coating for striping new or old asphalt and concrete, and for restriping. Similar to chlorinated without the added rubber.
- Fed. Spec. A-A-2886(B) type II.
- Traffic Striping and Zone Striping Paints
- APPLICATION METHOD: Brush, roller or spray machine (except Fast-Dry) SURFACES: Asphalt, concrete, and brick USES: For parking lots, fire lanes, centerlines, crosswalks, warehouse aisles, bike lanes, curbs and medians, roads and highways, handicap parking, airport runways, running tracks, and arrows and markings Low VOC marking paints are made with Acetone (an exempt solvent) to comply with EPA and state regulations and the Federal Clean Air Act for VOC compliant coatings.