Average Rating: n/a
$293.92
+ 3 Business Day Shipping $31.40
Specs
| Item | Effluent Pump, Submersible |
|---|---|
| Type | Manual Operation (Switch Not Included) |
| HP | 4/10 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Mechanical Seal | Carbon/Ceramic |
| Impeller Material | Polypropylene |
| Voltage | 115 |
| Amps | 8.5 |
| Height (In.) | 12-1/8 |
| Dia. (In.) | 10-3/32 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 1-1/2 |
| Shaft Seal | Carbon/Ceramic |
| Max. Dia. Solids (In.) | 3/4 |
| GPM of Water @ 5 Ft. of Head | 69 |
| GPM of Water @ 10 Ft. of Head | 61 |
| GPM of Water @ 20 Ft. of Head | 44 |
| Max. Head (Ft.) | 38 |
| GPM of Water @ 15 Ft. of Head | 53 |
| GPM of Water @ 25 Ft. of Head | 34 |
| GPM of Water @ 30 Ft. of Head | 23 |
| Max. Temp. (F) | 130 |
| Phase | 1 |
| RPM | 3450 |
| Thermal Protection | Yes |
| Motor Type | Oil Filled |
| Bearing Type | Upper sleeve and lower Ball |
| Shaft Material | Carbon Steel |
| Standards | CSA, UL |
| Warranty | 3 yr. |
| UNSPSC | 40151513 |
| Weight | 38.300000 |
| SKUs | 5CZG2 |
Description
Effluent Pump, Submersible, 4/10 HP, Housing Cast Iron, Impeller Material Polypropylene, 115 Voltage, 8.5 Amps, Height 12 1/8 In, Dia 10 3/32 In, Cord Length 20 Ft, Discharge NPT 1 1/2 In, Max Dia Solids 3/4 In, Max Head 38 Ft, Max Temp 130 F, Phase 1, Thermal Protection, Standards CSA, UL
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Effluent Pumps
- Handle solids from 3/4" to 1-1/2" For float switches, see page 4049. For control panels, see page 4048.
- Zoeller
- Hermetically sealed, with nonclogging vortex impellers and screenless suction inlets. For 2VJ61, 2VJ62, 2VJ63, 2VJ64, 2VJ65, the flange can be removed to act as a 1-1/2" discharge.
- Max. temp.: 130 F
