Average Rating: n/a
$58.01 + 3 Business Day Shipping $7.67
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| Style | 3-Piece Oil-Lubricated Booster |
| Speed | 1 |
| HP | 1/6 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 1.9 |
| Inlet/Outlet | Flanged |
| Housing Material | Bronze |
| Face to Face Dimension (In.) | 8-1/2 |
| Max. Temp. (F) | 225 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 12 |
| RPM | 1725 |
| Impeller Material | Nylon |
| Shaft Material | Steel |
| Thermal Protection | Yes |
| GPM of Water @ 1 Ft. of Head | 39 |
| GPM of Water @ 2 Ft. of Head | 38 |
| GPM of Water @ 3 Ft. of Head | 37 |
| GPM of Water @ 4 Ft. of Head | 35 |
| GPM of Water @ 5 Ft. of Head | 33 |
| GPM of Water @ 6 Ft. of Head | 32 |
| GPM of Water @ 7 Ft. of Head | 30 |
| GPM of Water @ 8 Ft. of Head | 28 |
| GPM of Water @ 9 Ft. of Head | 25 |
| GPM of Water @ 10 Ft. of Head | 22 |
| GPM of Water @ 11 Ft. of Head | 15 |
| GPM of Water @ 12 Ft. of Head | 5 |
| Length (In.) | 15-3/8 |
| Width (In.) | 8-1/2 |
| Max. GPM @ Head (Ft.) | 39 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 28 @ 8 |
| Min. GPM @ Head (Ft.) | 15 @ 11 |
| Bearing Type | Bronze Sleeve |
| Mechanical Seal | Carbon/Ceramic |
| Construction | Bronze |
| Additional Features | Bell & Gossett Motor |
| Manufacturers Warranty Length | 3 Years |
| Compliance | Certified For Use In Potable Water Applications in CA and VT |
| UNSPSC | 40151726 |
| Weight | 1.800000 |
| SKUs | 5JPD2 |
Description
Flange, Pipe Size (In.) 1 1/2 NPT, Material Low Lead Bronze, Max. Operating Temp. 230, Max. Pressure 125 PSI, Gasket Not Included, Includes Cap Screws and Nuts, Package Quantity 2
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Hot Water Circulating Pumps
- 1-phase models are thermally protected Cast-iron units are not for potable water
- 3-Pc., Oil-Lubricated Booster
- Flexible spring-design coupler permits quiet operation. Sleeve bearings constantly circulate oil over bearing surfaces. Mechanical seal. Close centrifugal impeller/body tolerances minimize water slippage.
- Max. working pressure: 125 psi Max. working temp.: 225 F
