Average Rating: n/a
$3,197.88 + 3 Business Day Shipping $54.60
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| Style | 3-Piece Oil-Lubricated Booster |
| Speed | 1 |
| HP | 1/2 |
| Voltage | 115/230 |
| Phase | 1 |
| Amps | 5.2/2.6 |
| Inlet/Outlet | Flanged |
| Housing Material | Bronze |
| Face to Face Dimension (In.) | 12 |
| Max. Temp. (F) | 225 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | Yes |
| Shut-Off (Ft.) | 23 |
| RPM | 1750 |
| Impeller Material | Bronze |
| Shaft Material | Steel |
| Thermal Protection | Yes |
| GPM of Water @ 8 Ft. of Head | 115 |
| GPM of Water @ 9 Ft. of Head | 110 |
| GPM of Water @ 10 Ft. of Head | 106 |
| GPM of Water @ 11 Ft. of Head | 102.5 |
| GPM of Water @ 12 Ft. of Head | 97 |
| GPM of Water @ 13 Ft. of Head | 92.5 |
| GPM of Water @ 15 Ft. of Head | 82 |
| GPM of Water @ 18 Ft. of Head | 60 |
| GPM of Water @ 20 Ft. of Head | 42.5 |
| Length (In.) | 20-1/4 |
| Width (In.) | 12 |
| Max. GPM @ Head (Ft.) | 115 @ 8 |
| Best Efficiency GPM @ Head (Ft.) | 80 @ 15 |
| Min. GPM @ Head (Ft.) | 42 @ 20 |
| Bearing Type | Bronze Sleeve |
| Mechanical Seal | Carbon/Ceramic |
| Construction | Bronze |
| Additional Features | Bell & Gossett Motor |
| Manufacturers Warranty Length | 3 Years |
| Compliance | Certified For Use In Potable Water Applications in CA and VT |
| UNSPSC | 40151504 |
| Weight | 74.000000 |
| SKUs | 5JPF1 |
Description
Circulator Pump, 3-Piece, 1/2 HP, 1 Phase, Voltage 115/230, 5.2/2.6 Amps, Inlet/Outlet Flanged, Housing Material Bronze, Max. Temp. 225 F, Max. Working Pressure 125 PSI, Shut-Off 23 Ft., 1750 RPM, Impeller Material Bronze, Thermal Protection, Mechanical Seal Carbon/Ceramic, Additional Features Bell & Gossett Motor, Warranty Length 3 Years
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Hot Water Circulating Pumps
- 1-phase models are thermally protected Cast-iron units are not for potable water
- 3-Pc., Oil-Lubricated Booster
- Flexible spring-design coupler permits quiet operation. Sleeve bearings constantly circulate oil over bearing surfaces. Mechanical seal. Close centrifugal impeller/body tolerances minimize water slippage.
- Max. working pressure: 125 psi Max. working temp.: 225 F
