1/2 HP Non-Clogging Vortex Pump
Average Rating: 4.2
|Volute Material||Corrosion-Resistant Reinforced Thermoplastic|
|Shaft Material||Stainless Steel|
|Motor Type||Single phase, oil filled|
|Minimum Operating Depth||1/8 inch|
|Maximum Head||20 Feet|
|Maximum Flow||2500 GPH|
|Maximum Diameter Solids||1/2 inch|
|Liquid Temperature Range||40 degrees F to 120 degrees F|
|Item||Submersible Utility Pump|
|Impeller Material||Corrosion-Resistant Reinforced Thermoplastic|
|Housing Material||Corrosion-Resistant Reinforced Thermoplastic|
|Height||9 1/2 inches|
|GPH of Water @ 5 Ft. of Head||2040|
|GPH of Water @ 15 Ft. of Head||800|
|GPH of Water @ 10 Ft. of Head||1550|
|Discharge NPS (In.)||1 1/4 inches, 3/4 inch adapter included|
|Cord Length||8 Feet|
|Base Diameter||6.13 inches|
The Wayne Water Systems VIP50 Non-Clogging Vortex Pump is designed for non-automatic use in removing water that contains up to 1/2 inch diameter solids. Bottom suction design filters and removes water down to 1/8 inch of surface. The corrosion resistant reinforced thermoplastic housing, volute and impeller means the Wayne VIP50 can be fully submerged and left in water. Capable of pumping 2,500 gallons per hour, this submersible utility pump features an easy carry handle so you can take this pump anywhere.
Average Product Rating: 4.2based on 4 reviews
Pump it UP!!Monday, June 13, 2011
Great product. Does the job and more at a fast rate. Great for the price!! order arrived quickly
Great product compare to others, at a lower price, and higher hp
Operates better than advertisedFriday, June 03, 2011
Best pump for the price
Wayne sump pume - so-soFriday, May 13, 2011
The pump runs very hot and did not empty the last 3" or so. Not sure if it is still working, it just stopped.
It did get most of the water out
Pump it up!!!Friday, March 25, 2011
Great product for insurance needed on monsoon weather in the forcast! If you don,t have flood insurance,you,ll need one like this for the basement!
Price for $ , a half horse pump!
Nothing I could think of!