Direct Drive Blower Motor, Split-Phase, 1/3, 1/10 HP, Nameplate RPM 1725/1140, Voltage 115, 1 Phase, Frame 56CZ, Open Dripproof, Number of Speeds 1, Full Load Amps 5.4/2.3, 60 Hz, Face Mounting, Thermal Protection Auto, Insulation Class B, Service Factor 1.35, Ball Bearings, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCWShaft Dia. 5/8 In., Shaft Length 2-1/4 In., Capacitor Required None
- Note: Not intended for power transmission applications.
Split-Phase Face-Mount Motors
- NEMA service factors up to 1.40 provide a reserve margin for applications where intermittent overloading or fluctuating (high/low) voltage conditions may occur. Provide direct replacement in many Jenn-Air and similar commercial kitchen exhaust ventilators. Motors are compatible with 2-speed 115V switch 1DGZ9 sold on page 4446. For use in exhaust ventilators in commercial cooking areas and other moderate-starting torque equipment that can be directly connected to a NEMA 56CZ face-mounted motor.
- UL Recognized and CSA Certified.
- Enclosure: open dripproof (ODP) Insulation: Class B Max. ambient: 40 C Rotation: CW/CCW Bearings: ball