Washdown Motor, 3 Phase, 1/2 HP, 1745 Nameplate RPM, Voltage 208-230/460, Phase 3, 56C Frame, Totally Enclosed Non Ventilated, Full Load Amps 1.8-1.6/0.8, 60 Hz, Face Mounting, Thermal Protection None, F Insulation Class, Service Factor 1.15, Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 9-3/4 In., Shaft Dia. 5/8 In., Shaft Length 1-7/8 In.Continuous Duty, Frame Material Stainless Steel, Shaft Material 300 Series Stainless Steel, Nominal Efficiency 82.5 Percent
Stainless Steel Washdown Motors
- All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. Motors are well-sealed against moisture and condensation to protect internal components, and exteriors are completely paint- and coating-free. Heavy polyester insulating varnish applied to the windings for extra moisture and corrosion resistance. Moisture-resistant sealant between frame and endbells. Double-sealed oversized bearings with rust-inhibitive grease. Shaft-end bearing is locked internally to limit axial endplay. 4 drains in each endshield allow drainage of condensation in any mounting position. For use in the food processing, chemical processing, and beverage industries.
- UL Recognized, CSA Certified. 3-phase models are also CE Certified.
- Insulation: Class F 1-phase models meet NEMA MG1-1.26.6 Max. ambient: 40 C Thermal protection: none, except 12V772 to 12V775 are auto Bearings: ball Rotation: CW/CCW