Average Rating: n/a
$618.73
+ 3 Business Day Shipping $14.07
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| HP | 1/6 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 1.0 |
| Inlet/Outlet | Flanged |
| Housing Material | Stainless Steel |
| Face to Face Dimension (In.) | 8-1/2 |
| Max. Temp. (F) | 225 |
| Max. Working Pressure (PSI) | 150 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 29 |
| RPM | 3450 |
| Impeller Material | Noryl(R) |
| Shaft Material | Stainless Steel |
| Thermal Protection | Yes |
| GPM of Water @ 1 Ft. of Head | 57 |
| GPM of Water @ 2 Ft. of Head | 56 |
| GPM of Water @ 3 Ft. of Head | 54 |
| GPM of Water @ 4 Ft. of Head | 52 |
| GPM of Water @ 5 Ft. of Head | 51 |
| GPM of Water @ 6 Ft. of Head | 49 |
| GPM of Water @ 7 Ft. of Head | 47 |
| GPM of Water @ 8 Ft. of Head | 45 |
| GPM of Water @ 9 Ft. of Head | 44 |
| GPM of Water @ 10 Ft. of Head | 43 |
| GPM of Water @ 11 Ft. of Head | 41 |
| GPM of Water @ 12 Ft. of Head | 39 |
| GPM of Water @ 13 Ft. of Head | 38 |
| GPM of Water @ 15 Ft. of Head | 33 |
| GPM of Water @ 18 Ft. of Head | 28 |
| GPM of Water @ 20 Ft. of Head | 23 |
| GPM of Water @ 25 Ft. of Head | 13 |
| Length (In.) | 8 |
| Width (In.) | 4-3/4 |
| Feet of Head @ 3 GPM | 28.5 |
| Feet of Head @ 4 GPM | 28 |
| Feet of Head @ 5 GPM | 27.5 |
| Max. GPM @ Head (Ft.) | 57 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 30 @ 17 |
| Feet of Head @ 6 GPM | 27 |
| Feet of Head @ 7 GPM | 26.5 |
| Min. GPM @ Head (Ft.) | 10 @ 25 |
| Feet of Head @ 8 GPM | 26.5 |
| Drive Type | Direct |
| Bearing Type | Ball |
| Feet of Head @ 9 GPM | 26 |
| Feet of Head @ 10 GPM | 25.5 |
| Mechanical Seal | Carbon/Silicon-Carbide |
| Construction | Stainless Steel |
| Feet of Head @ 12 GPM | 25 |
| Feet of Head @ 15 GPM | 24 |
| Feet of Head @ 18 GPM | 22.5 |
| Feet of Head @ 20 GPM | 22 |
| Feet of Head @ 25 GPM | 20 |
| Feet of Head @ 30 GPM | 17 |
| Feet of Head @ 40 GPM | 12 |
| Feet of Head @ 50 GPM | 5 |
| Manufacturers Warranty Length | 3 years |
| Compliance | UL/AB1953 |
| UNSPSC | 40151504 |
| Weight | 11.640000 |
| SKUs | 5CHK4 |
Description
Circulator Pump, Close Coupled, 1/6 HP, 1 Phase, Voltage 115, 1.0 Amps, Inlet/Outlet Flanged, Housing Material Stainless Steel, Max. Temp. 225 F, Max. Working Pressure 150 PSI, Shut-Off 29 Ft., 3450 RPM, Impeller Material Noryl, Thermal Protection, Mechanical Seal Carbon/Silicon-Carbide, Warranty Length 3 Years, Compliance UL/AB1953
Hot Water Circulating Pumps
- Cast-Iron
- Not for use in potable water systems.
- Maintenance-free in-line pumps are made for hydronic heating, domestic hot water recirculation, solar thermal heating, and heat recovery systems. 2400 Series has a 1/2" carbon/silicon-carbide mechanical seal, permanently lubricated ball bearings with 1/2" stainless steel shaft. Wet rotor. 00 Series has a replaceable cartridge that contains all moving parts and the motor is impedance-protected.
- Stainless Steel
- 100% lead-free construction meets all ANSI/NSF-61 requirements for use in potable water systems. Meet NSF requirement for =0.25% lead content.
