Dayton 5DVP7

Dayton

Exh Vent, 3 Spd, 11 Whl, 115 V, Wall Mnt

5DVP7 1360762
Average Rating: n/a
 Be the first to write a review!
$671.22 + 3 Business Day Shipping $28.60

Specs

ItemExhaust Ventilator
TypeCentrifugal Upblast Direct Drive, 3 Speed
Wheel Dia. (In.)11
CFM @ 0.000-In. SP1049/880/711
CFM @ 0.125-In. SP964/774/570
CFM @ 0.250-In. SP861/641/381
CFM @ 0.375-In. SP747/484/-
CFM @ 0.500-In. SP616/199/-
CFM @ 0.625-In. SP442/-/-
Sones @ 0.125-In. SP @ 5 Ft.9.3/6.7/4.5
Sones @ 0.250-In. SP @ 5 Ft.8.5/6.4/4.5
Motor Voltage115
Phase1
Hz60
Max. Operating Amps2.6/2.0/1.5
Motor HP1/8
Max. BHP0.12
RPM1550/1300/1050
Base Width (In.)17-7/8
Base Length (In.)17-7/8
Base Height (In.)1-3/4
Overall Dia. (In.)21
Overall Height (In.)21
Shaft Dia. Wheel End (In.)1/2
Mounting LocationWall
Max. Inlet Temp. (Deg. F)300
Housing MaterialSpun Aluminum
Wheel MaterialAluminum
Wheel TypeBackward Incline
Speed Control1DGV1
Speed ControllableYes
Agency ComplianceUL cUL 705
Includes NEMA 1 Junction Box
Recommended Damper Size (In.)10 x 10
Recommended Damper Stock No.4HX73
UNSPSC40101502
Weight 33.500000

Description

Exhaust Ventilator, Centrifugal Upblast Direct Drive, 3 Speed, Wheel Dia. 11 In., CFM @ 0.000-In. SP 1049/880/711, @ 0.125-In. SP 964/774/ 570, Sones @ 0.250-In. SP @ 5 Ft. 8.5/6.4/4.5, Motor Voltage 115, 1 Phase, 60 Hz, Max. Operating Amps 2.6, Motor HP 1/8, Base Width 17 7/8 In., Base Length 17 7/8 In., Mounting Location Wall, Max Inlet Temp 300 Deg F, Speed Control 1DGV1, Includes NEMA 1 Junction Box

Restrictions
  • Note: Speed controllers available for 115V units only. For kitchen application, check with local code authorities for minimum duct velocities. Do not use dampers in any kitchen application. NFPA 96.

Centrifugal Direct-Drive Upblast Exhaust Ventilators
  • 3-Speed
  • For general clean air with inlet air temps. below 130 F. 3 specific RPMs; speed controllable on any RPM providing 30% useable turndown. UL 705 Listed for Power Ventilators.
  • Aluminum, backward-inclined wheel 1-piece rolled aluminum windband fully welded to base Motor, drive frame, and blower wheel are isolated from mounting base Motor compartment is isolated from contaminated air NEMA 1 junction box in motor enclosure (Hazardous units have NEMA 7 & 9 disconnect switch) UL and C-UL Listed (Motor only UL Listed for Class I Groups C & D, and Class II Groups F & G for hazardous location units)

Sponsored Links
More Products
Honeywell TL8230A1003 T-Stat, Line V, Digital, 208-240 VHoneywellT-Stat, Line V, Digital, 208-240 VTL8230A1003 152274(0 reviews)$52.08 + $9.16 Shipping
Little Giant 577301 APCP-1700 1800 GPH Swimming Pool Cover PumpLittle Giant1800 GPH Swimming Pool Cover Pump577301 APCP-1700 113373(0 reviews)$217.90 + $14.95 ShippingOut of Stock
Cooper Atkins 24HP Food Srvc Thermometer, Oven, 100 to 600 FCooper AtkinsFood Srvc Thermometer, Oven, 100 to 600 F24HP 1314229(0 reviews)$12.05 + $7.15 Shipping
Econoline 526020G-40 Blast Media, 40 Lbs, Corn Cob, 14/20 GritEconolineBlast Media, 40 Lbs, Corn Cob, 14/20 Grit526020G-40 499763(0 reviews)$37.87 + $34.45 Shipping
UltraLube 10340 H1 Food Machinery Grease, 14 oz.UltraLubeH1 Food Machinery Grease, 14 oz.10340 1430567(0 reviews)$12.98 FREE Shipping