Average Rating: n/a
$3,517.37 + 3 Business Day Shipping $57.85
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| Style | 3-Piece Oil-Lubricated Booster |
| Speed | 1 |
| HP | 3/4 |
| Voltage | 115/230 |
| Phase | 1 |
| Amps | 7/3.5 |
| Inlet/Outlet | 3" Flanged |
| Housing Material | Bronze |
| Face to Face Dimension (In.) | 12 |
| Max. Temp. (F) | 225 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | Yes |
| Shut-Off (Ft.) | 30 |
| RPM | 1725 |
| Impeller Material | Bronze |
| Shaft Material | Steel |
| Thermal Protection | Yes |
| GPM of Water @ 11 Ft. of Head | 135 |
| GPM of Water @ 12 Ft. of Head | 130 |
| GPM of Water @ 13 Ft. of Head | 127 |
| GPM of Water @ 15 Ft. of Head | 118 |
| GPM of Water @ 18 Ft. of Head | 105 |
| GPM of Water @ 20 Ft. of Head | 95 |
| GPM of Water @ 25 Ft. of Head | 61 |
| Length (In.) | 20-1/4 |
| Width (In.) | 12 |
| Max. GPM @ Head (Ft.) | 135 @ 11 |
| Best Efficiency GPM @ Head (Ft.) | 85 @ 21 |
| Min. GPM @ Head (Ft.) | 60 @ 25 |
| Bearing Type | Bronze Sleeve |
| Mechanical Seal | Carbon/Ceramic |
| Construction | Bronze |
| Additional Features | Bell & Gossett Motor |
| Manufacturers Warranty Length | 3 Years |
| Compliance | Certified For Use In Potable Water Applications in CA and VT |
| UNSPSC | 40151504 |
| Weight | 79.000000 |
| SKUs | 5JPF2 |
Description
Circulator Pump, 3-Piece, 3/4 HP, 1 Phase, Voltage 115/230, 7/3.5 Amps, Inlet/Outlet 3 In. Flanged, Housing Material Bronze, Max. Temp. 225 F, Max. Working Pressure 125 PSI, Shut-Off 30 Ft., 1725 RPM, Impeller Material Bronze, Thermal Protection, Mechanical Seal Carbon/Ceramic, Additional Features Bell & Gossett Motor, Warranty Length 3 Years
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Hot Water Circulating Pumps
- 1-phase models are thermally protected Cast-iron units are not for potable water
- 3-Pc., Oil-Lubricated Booster
- Flexible spring-design coupler permits quiet operation. Sleeve bearings constantly circulate oil over bearing surfaces. Mechanical seal. Close centrifugal impeller/body tolerances minimize water slippage.
- Max. working pressure: 125 psi Max. working temp.: 225 F
