Washdown Motor, 3 Phase, 3/4 HP, 1725 Nameplate RPM, Voltage 208-230/460, Phase 3, 56C Frame, Totally Enclosed Non Ventilated, Full Load Amps 2.4-2.4/1.2, 60/50 Hz, Face/Base Mounting, Thermal Protection None, F Insulation Class, Service Factor 1.15, Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 12-3/16 In., Shaft Dia. 5/8 In., Shaft Length 1-7/8 In.Length Less Shaft 10-3/16 In., Continuous Duty, Frame Material Stainless Steel
Stainless Steel Encapsulated 3-Phase Washdown Motors
- All exterior components are 304 series stainless steel for severe-duty washdown environments. Motors are sealed for maximum protection against water intrusion by incorporating an O-ring seal in each endbell. A breather vent and flared shell eliminate condensation inside the motor. A triple-sealed shaft design protects bearings from moisture and contaminants. Windings are completely encapsulated, enhancing heat transfer capability and corrosion resistance. A potted conduit box with drain holes protects the lead wires and allows for drainage in any mounting position. A power connection kit is provided for the lead wires, ensuring waterproof connections. For use in highly corrosive wet/washdown applications including food and beverage processing, pharmaceutical production, and corrosive chemical processing.
- UL Recognized.
- Service factor: 1.15 Insulation: Class F Inverter rated, meet NEMA MG1 Part 31; see table footnotes for details Max. ambient: 40 C Thermal protection: none Bearings: ball Rotation: CW/CCW