Stepper Mtr, 5-Ph, 17 Frame, Geared, 10 N-m
Average Rating: n/a
|Frame Size||NEMA 17 / 42mm|
|Shaft Type||Geared Shaft|
|Max. Holding Torque||0.98 N-m / 138.9 oz-in|
|Resolution||0.72 deg Full Step|
|Amps Per Phase||0.75|
|Rotor Inertia||68.0 g-cm2|
|Winding Resistance||1.70 ohms|
|Overall Length||2-15/16 In|
|Mounting Pattern||31 x 31mm|
|Requires||Driver 5PFF4 or 5PFF5, Controller 5PFF8 or 5PFF9, Cable 5PFG0 or 5PFG1|
- Stepping Motors
- Full step 0.72 resolution, half step 0.36 resolution, and as low as 0.0029 resolution with micro-step.
- For locations with limited space and where a high-speed, high-torque motor is required. Ideal for indexing and other rapid positioning applications. No maintenance or communication problems as found with servo motors. Each stepping motor requires a motor driver and motion controller (not included, sold separately on this page).