
Average Rating: n/a

Specs
| Item | Sprinkler/Booster Pump |
|---|---|
| Type | Self-Priming |
| HP | 1-1/2 |
| Phase | 3 |
| Voltage | 208-230/460 |
| Amps | 6.66-6.35/3.33 |
| Hz | 60 |
| Inlet (In.) | 1-1/2 |
| Outlet (In.) | 1-1/2 |
| Suction Lift (Ft.) | 25 |
| Length (In.) | 17-3/4 |
| Width (In.) | 8 |
| Height (In.) | 10-11/16 |
| GPM @ 10 PSI | 77 |
| GPM @ 15 PSI | 71 |
| GPM @ 20 PSI | 64 |
| GPM @ 25 PSI | 57 |
| GPM @ 30 PSI | 49 |
| GPM @ 35 PSI | 41 |
| GPM @ 40 PSI | 31 |
| GPM @ 45 PSI | 19 |
| Shut-Off (Ft.) | 115 |
| Max. Pressure (PSI) | 50 |
| Best Efficiency GPM @ Head (Ft.) | 45 @ 79 |
| Best Efficiency Range GPM @ Head (Ft.) | 57-19 GPM @ 57-104 FT |
| Stages | 1 |
| Motor Enclosure | TEFC |
| Motor Type | 3-Phase |
| NEMA/IEC Frame | 56J |
| RPM | 3450 |
| Service Factor | 1.3 |
| Wetted Materials | Cast Iron, Stainless Steel, Buna-N, Carbon, Ceramic |
| Housing Material | Cast Iron |
| Impeller Material | Stainless Steel |
| Volute Material | Cast Iron |
| Seal Type | Buna N O-Ring Casing, Mechanical |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| Seal Application | Nonflammable Liquids Compatible with Pump Components |
| Shaft Material | Stainless Steel |
| Screw Material | Plated Steel |
| GPM of Water @ 2 Ft. of Head | 85 |
| Bearing Type | Double Shielded Pre Lubricated Ball |
| Max. Specific Gravity | 1 |
| Max. Case Pressure (PSI) | 150 |
| Max. Fluid Viscosity | 31 SSU |
| Inlet Pressure (PSI) | 100 |
| Impeller Type | Closed |
| Duty | Continuous |
| Port Rotation | 90 Degrees Increments |
| Drain Plug | Yes |
| Agency Compliance | Motor Only CSA |
| Manufacturers Warranty Length | 1 Year |
| Features | Removable and Replaceable Volute/Diffusers, Front Drain Plug |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | Lawn Sprinking, Spraying Irrigation, Draining and General Dewatering Application, Etc. |
| Includes | Manual |
| UNSPSC | 40151503 |
| Weight | 74.000000 |
| SKUs | 5RWG8 |
Description
- Pumps hold prime for efficient water transfer.
- Cast-iron housings
- Dayton
- Feature an easy clean-out design with a front drain plug and removable, replaceable cast-iron volute/diffusers and adapters. 1-phase pumps have built-in thermal overload protection.
- Max. fluid temp.: 180 F Max. casing pressure: 150 psi




