| Item | Sprinkler/Booster Pump |
|---|
| Type | Self-Priming |
|---|
| HP | 2 |
|---|
| Phase | 3 |
|---|
| Voltage | 208-230/460 |
|---|
| Amps | 10.64-9.67/4.84 |
|---|
| Hz | 60 |
|---|
| Inlet (In.) | 1-1/2 |
|---|
| Outlet (In.) | 1-1/2 |
|---|
| Suction Lift (Ft.) | 25 |
|---|
| Length (In.) | 18-3/4 |
|---|
| Width (In.) | 8 |
|---|
| Height (In.) | 9-1/4 |
|---|
| GPM @ 10 PSI | 62 |
|---|
| GPM @ 15 PSI | 61 |
|---|
| GPM @ 20 PSI | 59 |
|---|
| GPM @ 25 PSI | 55 |
|---|
| GPM @ 30 PSI | 52 |
|---|
| GPM @ 35 PSI | 48 |
|---|
| GPM @ 40 PSI | 45 |
|---|
| GPM @ 45 PSI | 41 |
|---|
| GPM @ 50 PSI | 36 |
|---|
| GPM @ 55 PSI | 32 |
|---|
| GPM @ 60 PSI | 28 |
|---|
| GPM @ 65 PSI | 22 |
|---|
| GPM of Water @ 70 PSI | 15 |
|---|
| Shut-Off (Ft.) | 173 |
|---|
| Max. Pressure (PSI) | 75 |
|---|
| Best Efficiency GPM @ Head (Ft.) | 32 @ 105 |
|---|
| Best Efficiency Range GPM @ Head (Ft.) | 48-30 GPM @ 80-130 FT |
|---|
| Stages | 2 |
|---|
| Motor Enclosure | TEFC |
|---|
| Motor Type | 3-Phase |
|---|
| NEMA/IEC Frame | 56J |
|---|
| RPM | 3450 |
|---|
| Service Factor | 1.2 |
|---|
| Wetted Materials | Cast Iron, Stainless Steel, Buna-N, Carbon, Ceramic |
|---|
| Housing Material | Cast Iron |
|---|
| Impeller Material | Stainless Steel |
|---|
| Volute Material | Cast Iron |
|---|
| Seal Type | Buna-N O-Ring Casing, Mechanical |
|---|
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
|---|
| Seal Application | Nonflammable Liquids Compatible with Pump Components |
|---|
| Shaft Material | Stainless Steel |
|---|
| Screw Material | Plated Steel |
|---|
| GPM of Water @ 2 Ft. of Head | 65 |
|---|
| Bearing Type | Double Shielded Pre Lubricated Ball |
|---|
| Max. Specific Gravity | 1 |
|---|
| Max. Case Pressure (PSI) | 150 |
|---|
| Max. Fluid Viscosity | 31 SSU |
|---|
| Inlet Pressure (PSI) | 75 |
|---|
| Impeller Type | Closed |
|---|
| Duty | Continuous |
|---|
| Port Rotation | 90 Degrees Increments |
|---|
| Drain Plug | Yes |
|---|
| Agency Compliance | Motor Only CSA |
|---|
| Manufacturers Warranty Length | 1 Year |
|---|
| Features | Removable and Replaceable Volute/Diffusers, Front Drain Plug |
|---|
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
|---|
| Application | Lawn Sprinking, Spraying Irrigation, Draining and General Dewatering Application, Etc. |
|---|
| Includes | Manual |
|---|
| UNSPSC | 40151503 |
|---|
| Weight | 85.000000 |
|---|
| SKUs | 5RWH1 |
|---|
Sprinkler/Booster Pump, Self-Priming, Housing Material Cast Iron, Inlet 1-1/2 In, Outlet 1-1/2 In, 2 HP, 3 Phase, Voltage 208-230/460, Amps 10.64-9.67/4.84, 60 Hz, Suction Lift 25 Ft., Shut-Off 173 Ft., Max. Pressure 75 PSI, Stages 2, Motor Enclosure TEFC, Motor Type 3-Phase, 3450 RPM, Application Lawn Sprinking, Spraying Irrigation, Draining and General Dewatering Application, Etc., Includes Manual
Self-Priming Lawn Sprinkler/Booster Pumps- Pumps hold prime for efficient water transfer.
- Cast-iron housings
- Dayton
- Feature an easy clean-out design with a front drain plug and removable, replaceable cast-iron volute/diffusers and adapters. 1-phase pumps have built-in thermal overload protection.
- Max. fluid temp.: 180 F Max. casing pressure: 150 psi