Average Rating: n/a
$643.34 + 3 Business Day Shipping $40.30
Specs
| Item | Centrifugal Pump |
|---|---|
| Type | Self-Priming |
| HP | 3/4 |
| Phase | 1 |
| Voltage | 115/208-230 |
| Amps | 16.50/9.07-8.25 |
| Hz | 60 |
| Inlet (In.) | 2 |
| Outlet (In.) | 1-1/2 |
| Suction Lift (Ft.) | 25 |
| Length (In.) | 18-5/8 |
| Width (In.) | 6-9/16 |
| Height (In.) | 11-13/16 |
| GPM @ 10 PSI | 49 |
| GPM @ 15 PSI | 46 |
| GPM @ 20 PSI | 40 |
| GPM @ 25 PSI | 34 |
| GPM @ 30 PSI | 28 |
| GPM @ 35 PSI | 21 |
| GPM @ 40 PSI | 15 |
| Shut-Off (Ft.) | 97 |
| Max. Pressure (PSI) | 42 |
| Best Efficiency GPM @ Head (Ft.) | 32 @ 60 |
| Best Efficiency Range GPM @ Head (Ft.) | 15-50 GPM @ 90-50 Ft. |
| Stages | 1 |
| Motor Enclosure | TEFC |
| Motor Type | Capacitor-Start, Capacitor-Run |
| NEMA/IEC Frame | 56J |
| RPM | 3450 |
| Service Factor | 1.27 |
| Wetted Materials | Thermoplastic, SS,Viton,Carbon,Ceramic. |
| Housing Material | Thermoplastic |
| Impeller Material | Noryl |
| Volute Material | Thermoplastic |
| Seal Type | Viton Fitted Mechanical Shaft |
| Seal Material | Viton, Carbon, Ceramic, Stainless Steel |
| Seal Application | Water |
| Shaft Material | Stainless Steel |
| Screw Material | Stainless Steel |
| GPM of Water @ 2 Ft. of Head | 54 |
| Thermal Protection | Automatic Reset |
| Bearing Type | Double Shielded Pre Lubricated Ball |
| Max. Specific Gravity | 1 |
| Max. Case Pressure (PSI) | 80 |
| Max. Fluid Viscosity | 31 SSU |
| Inlet Pressure (PSI) | 38 |
| Impeller Type | Closed |
| Duty | Continuous |
| Port Rotation | 90 Degrees Increments |
| Drain Plug | Yes |
| Agency Compliance | Motor Only CSA |
| Manufacturers Warranty Length | 1 Year |
| Features | Stainless Steel Fasteners and Inserts |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses |
| Includes | Manual |
| UNSPSC | 40151503 |
| Weight | 52.000000 |
| SKUs | 5RWP3 |
Description
Centrifugal Pump, Self-Priming, Housing Material Thermoplastic, Inlet 2 In, Outlet 1-1/2 In, 3/4 HP, 1 Phase, Voltage 115/208-230, Amps 16.50/9.07-8.25, 60 Hz, Suction Lift 25 Ft., Shut-Off 97 Ft., Max. Pressure 42 PSI, Stages 1, Motor Enclosure TEFC, Motor Type Capacitor-Start, Capacitor-Run, 3450 RPM, Application Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses, Includes Manual
Thermoplastic Self-Priming Pumps
- Fiberglass-reinforced pump bodies are specially fitted to resist seawater and saltwater. Durable and corrosion-resistant with stainless steel fasteners, inserts, and shafts. 1-phase pumps have built-in thermal overload protection.
- Max. operating temp.: 140 F Suction lift: 5 ft. Heavy-duty TEFC, 3450 rpm motors
