Average Rating: n/a
$379.74 + 3 Business Day Shipping $11.41
Specs
| Item | Brake |
|---|---|
| Type | End Mount Disc |
| Static Torque (Ft.-Lb.) | 10 |
| Shaft Dia. (In.) | 7/8 |
| Max. Bore (In.) | 7/8 |
| Keyseat Size (In.) | 3/16 x 3/32 |
| Enclosure | Dripproof |
| Duty | Continous |
| Voltage @ 60 Hz | 115/208-230 |
| Voltage @ 50 Hz | 95/174-190 |
| Coil Volts | 115-208/230VAC or 95/174-190VAC |
| Phase | Single |
| Max. RPM | 3600 |
| Max. HP @ 1725 RPM | 2 |
| Max. HP @ 3450 RPM | 3 |
| Ambient (C) | 40D |
| Hz | 60/50 |
| Amps Holding | 0.5/0.3 |
| Inrush Amps | 11.5/5.8 |
| Service Factor | 1.4 |
| NEMA/IEC Frame | 143/145TC |
| Power Lead Length (In.) | 18 |
| Lever Type | Manual Release |
| Mounts On | 143/145TC Motor Flange |
| Finish | Red Primer |
| Length (In.) | 4 |
| Width (In.) | N/A |
| Dia. (In.) | 6.50 |
| Series | 5602 Style |
| Function | Stops And Holds A Motor Shaft From Rotating |
| Application | Brake Attaches To The Accessory End Of A Motor To Stop And Hold The Motor Shaft |
| Converts | Motor To A Brake Motor |
| Agency Compliance | CSA, ROHS Compliant |
| Includes | Brake And Instruction Manual |
| Weight | 7.560000 |
| SKUs | 5URA2 |
Description
- End Mount Magnetic Disc Brakes
- Direct-acting spring-set brakes have single-point air gap adjustment, factory set for plug-and-run assembly for easy maintenance. Have no linkage to wear, which helps extend service life. Knock-out hole in cover accommodates through-shaft brake motors with fans. Suitable for use in conveyors, packaging machines, hoist end-trucks, security/toll booth gates, and sorting machines.
- Service factor: 1.4
- Max. ambient: 40°C
- Coil lead length: 18"
- 60/50 Hz
- Mounting: horizontal
- Note: Not intended for accurate positioning, indexing, or vertical holding applications such as vertical conveyors or hoists.
Brake, End Mount Disc, Static Torque 10 Ft.-Lb., Shaft Dia. 7/8 In., Dripproof Enclosure, Continous Duty, 115/208-230 Voltage @ 60 Hz, 95/174-190 Voltage @ 50 Hz, Single Phase, Max. RPM 3600, Max. HP @ 1725 RPM 2, Max. HP @ 3450 RPM 3, Ambient 40D C, 60/50 Hz, 0.5/0.3 Amps Holding, 11.5/5.8 Inrush Amps, 1.4 Service Factor, 143/145TC NEMA/IEC Frame, Power Lead Length 18 In., Red Primer Finish, Length 4 In., Dia. 6.50 In.
