Average Rating: n/a
$2,621.56
+ 3 Business Day Shipping $42.25
Specs
| Item | Brake |
|---|---|
| Type | Double C-Face Magnetic Disc |
| Static Torque (Ft.-Lb.) | 50 |
| Shaft Dia. (In.) | 1 3/8 |
| Max. Bore (In.) | 1 3/8 |
| Keyseat Size (In.) | 5/16 x 5/32 |
| Enclosure | Waterproof/Dust-Tight |
| Duty | Continous |
| Voltage @ 60 Hz | 115/208-230 |
| Voltage @ 50 Hz | 95/174-190 |
| Coil Volts | 115-208/230VAC Or 96-174-190VAC |
| Phase | Single |
| Max. RPM | 3600 |
| Max. HP @ 1725 RPM | 10 |
| Max. HP @ 3450 RPM | 20 |
| Ambient (C) | 40D |
| Hz | 60/50 |
| Amps Holding | 1.2/0.6 |
| Inrush Amps | 10.6/5.3 |
| Service Factor | 1.4 |
| NEMA/IEC Frame | 213/215TC |
| Power Lead Length (In.) | 18 |
| Lever Type | Manual Release |
| Mounts On | 213/215TC Motor Flange |
| Finish | Red Primer/Aluminum |
| Length (In.) | 8-1/8 |
| Width (In.) | N/A |
| Dia. (In.) | 8.61 |
| Series | 81 Series |
| Function | Stops And Holds A Motor Shaft From Rotating |
| Application | Brake Attaches To The Drive End Of A Motor And Gear Reducer To Stop And Hold The Load. |
| Converts | Motor To A Brake Motor |
| Agency Compliance | CSA, ROHS Compliant |
| Includes | Brake, Instructions And Mounting Hardware |
| Weight | 55.000000 |
| SKUs | 5URC9 |
Description
- Double C-Face Magnetic Disc Brakes
- Direct-acting spring-set brakes use 1 moving part to engage and hold load under power-off conditions. Brake is designed to convert C-face motors and gearmotors to brake motors or brake gearmotors. CSA Certified; washdown brakes BISSC Certified.
- Service factor: 1.0
- Max. ambient: 40°C
- Coil lead length: 15"
- 60/50 Hz
- Mounting: horizontal
- Waterproof/Dust-tight
- Used in indoor and outdoor applications where dirt and moisture are present.
Brake, Double C-Face Magnetic Disc, Static Torque 50 Ft.-Lb., Shaft Dia. 1 3/8 In., Watertight/ Dust Proof Enclosure, Continous Duty, 115/208-230 Voltage @ 60 Hz, 95/174-190 Voltage @ 50 Hz, Single Phase, Max. RPM 3600, Max. HP @ 1725 RPM 10, Max. HP @ 3450 RPM 20, Ambient 40D C, 60/50 Hz, 1.2/0.6 Amps Holding, 10.6/5.3 Inrush Amps, 1.4 Service Factor, 213/215TC NEMA/IEC Frame, Power Lead Length 18 In., Red Primer/Aluminum Finish, Length 8-1/8 In., Dia. 8.61 In.
