Average Rating: n/a
$1,245.17 + 3 Business Day Shipping $36.40
Specs
| Type | Commercial/Industrial |
|---|---|
| Item | Upright Sump Pump |
| HP | 1/2 |
| Motor Enclosure | TEFC |
| Amps AC | 9 |
| Pump Base | Stainless Steel |
| Volute Material | Stainless Steel |
| Impeller Material | Stainless Steel |
| Column Material | Stainless Steel |
| Float Material | Stainless Steel |
| Height (In.) | 43 |
| Dia. (In.) | 13 |
| NPT Outlet (In.) | 2 |
| GPM of Water @ 5 Ft. of Head | 103 |
| GPM of Water @ 10 Ft. of Head | 72 |
| GPM of Water @ 15 Ft. of Head | 39 |
| GPM of Water @ 20 Ft. of Head | 2 |
| Max. Head (Ft.) | 20 1/2 |
| Best Efficiency GPM @ Head (Ft.) | 60 @ 12 |
| Base to Motor Height (In.) | 33 |
| Off Point (In.) | 4 |
| On Point (In.) | 11 |
| Cord Length (Ft.) | 8 |
| Bearing Material | Carbon |
| Bearing Type | Sleeve |
| Motor Type | PSC |
| Cord Size | 16/3 |
| Cord Type | SJT |
| Switch Type | Vertical |
| Switch | Float with Rod and Stops |
| Max. Dia. Solids (In.) | 3/4 |
| Max. Liquid Temp. (F) | 200 |
| Min. Sump Pit Dia. (In.) | 18 |
| Motor Housing | Aluminum |
| Hz | 60 |
| Insulation Class | B |
| Voltage | 115 |
| RPM | 1725 |
| Phase | 1 |
| Thermal Protection | Automatic |
| Adapter (In.) | N/A |
| Duty | Continuous |
| Features | An Automatic Float Type Switch, Double Shielded Ball Bearings at Both Ends |
| Application | For Pumping Clear Water or Effluent from Wet Pits, Loading Docks, Boiler Dump Pits, Below Ground Vaults, Elevator Pits and Other Residential, Commercial and Industrial Applications, for Hot Water Applications Up to 200 Degrees Fahrenheit |
| For Use With | Nonflammable Liquids Compatible with Pump Materials of Construction |
| Agency Compliance | CUS |
| Includes | Manual |
| Weight | 46.000000 |
| SKUs | 5URJ7 |
Description
- Upright Sump Pumps
- Commercial/Industrial
- Handle up to 3/4" dia. solids, except 5URH7, 5URH8, 5URH9, 5URI0, 5URI1, 5URI2, 5URI3, 5URI4, 5URI5, 5URI6, 5URI7, 5URI8, 5URI9, 5URJ0, 5URJ1 handle up to 7/16" dia.
- Continuous-duty, TEFC 115V, 60 Hz motors
- Max. liquid temp.: 200°F
- Note: Sump pit should not be less than 18" dia. and 24" deep; on-point 11", off-point 4". A check valve is recommended.
Upright Sump Pump, Commercial/Industrial, 1/2 HP, Motor Enclosure TEFC, Amps AC 9, Impeller Material Stainless Steel, Height (In.) 43, Dia. (In.) 13, NPT Outlet (In.) 2, GPM of Water @ 5 Ft. of Head 103, GPM of Water @ 15 Ft. of Head 39, Max. Head (Ft.) 20 1/2, Max. Dia. Solids (In.) 3/4
