Average Rating: n/a
$556.46 + 3 Business Day Shipping $32.50
Specs
| Item | Pressure Booster Pump |
|---|---|
| Type | High-Volume |
| Motor Enclosure | ODP |
| Housing Material | Cast Iron |
| HP | 1/2 |
| Phase | 1 |
| Voltage | 115/230 |
| Amps | 13/6.5 |
| Hz | 60 |
| Inlet (In.) | 1-1/2 NPT |
| Outlet (In.) | 1-1/4 NPT |
| GPM @ 15 PSI | 48 |
| GPM @ 20 PSI | 40 |
| GPM @ 25 PSI | 27 |
| Max. Pressure (PSI) | 30 |
| Suction Lift (Ft.) | 25 |
| Max. Case Pressure (PSI) | 100 |
| Max. PSI Boost @ 2-10 GPM | 28 |
| Max. PSI Boost @ 20 GPM | 26 |
| Max. PSI Boost @ 30 GPM | 24 |
| Max. GPM @ PSI | 48 @ 15 |
| Best Efficiency GPM @ PSI | 35 @ 22 |
| Min. GPM @ PSI | 27 @ 25 |
| Pressure Range (PSI) | 0 to 30 |
| Best Efficiency GPM @ Head (Ft.) | 35 @ 52 |
| Best Efficiency Range GPM @ Head (Ft.) | 43-25 GPM @ 43-60 Ft |
| Motor RPM | 3450 |
| Motor Type | Permanent Split Capacitor |
| Duty | Continuous Duty |
| Wetted Materials | Brass, Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic |
| Impeller Material | Brass |
| Impeller Type | Closed |
| Diffuser Material | Cast Iron |
| Seal Material | Stainless Steel, Buna, Carbon/Silicon Carbide |
| Seal Type | Mechanical |
| Shaft Material | Stainless Steel |
| Seal Application | Clear Water Below 200 PSI |
| Bearing Type | Permanently Lubricated Ball |
| Max. Liquid Temp. (F) | 200 |
| Min. Inlet Flow Required | 2 GPM |
| Max. Inlet Pressure (PSI) | 70 |
| Stages | 1 |
| Max. Fluid Viscosity | 31 SSU |
| Plug or Connector Type | Direct Wire |
| Length (In.) | 13-1/4 |
| Width (In.) | 8-1/4 |
| Height (In.) | 9-1/4 |
| Motor Ambient Temp. Rating | 149D F |
| Service Factor | 1.6 |
| Max. Working Pressure (PSI) | 100 |
| NEMA/IEC Frame | 56J |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | Pressure Boosting, Pressure Cleaning, Spray or Mist Systems, Reverse Osmosis, Water Circulation |
| Agency Compliance | CSA, CUS, UL Listed |
| Manufacturers Warranty Length | 1 Year |
| Includes | Manual |
| Weight | 40.000000 |
| SKUs | 5UXG6 |
Description
- High-Volume Pressure Booster Pumps
- Non-self priming pumps can lift water up to 25 ft. with foot valve and pump suction line/piping filled with water. Single stage models include a discharge port on the pump housing that can be adjusted 90 degrees. 2- and 3-stage models are equipped for applications that require higher pressures.
- CSA Certified.
- Cast Iron Housing
- Motor Enclosure: ODP
- Max. liquid temp.: 200ºF
- Inlet/outlet NPT: 1-1/2 and 1-1/4"
- Continuous-duty motors to boost pressure in high-flow applications
Pressure Booster Pump, High-Volume, ODP, Housing Material Cast Iron, 1/2 HP, 1 Phase, Voltage 115/230, 13/6.5 Amps, 60 Hz, Inlet 1-1/2 In NPT, Outlet 1-1/4 In NPT, Max. Pressure 30 psi, Suction Lift 25 Ft., Max. Case Pressure 100 psi, 3450 RPM, Motor Type Permanent Split Capacitor, Continuous Duty, Closed, Brass Impeller, Seal Material Stainless Steel, Buna, Carbon/Silicon Carbide, Max. Liquid Temp. 200F, Max. Fluid Viscosity 31 SSU, CSA, CUS, UL Listed, Includes Manual
