|Item||Direct Drive Blower Motor|
|Motor Type||Shaded Pole|
|Enclosure||Open Air Over|
|Full Load Amps||6.5|
|Max. Ambient Temp.||40 Degrees C|
|Duty||Continuous Air Over|
|Number of Speeds||1|
|Mounting||Torsion Flex Bracket|
|Length Less Shaft||4-5/8"|
|Capacitor Included||Not Required|
|RPM Range||1000 to 1380|
|Standards||UL Recognized, CSA Certified|
|Application||Exceptionally Quiet Operation On Shaft Mounted Blowers with 9 or 10" Dia. Wheels|
- These motors are suitable for unit heaters, condensers, furnace blowers, air circulators, fans, and a wide range of other shaft-mounted fan and blower equipment. 4UU91 and 4UU98 have a 5.0 cu.-in. junction box. 4KA20, 4KA22, and 4KA23 are used in Coleman furnaces. 4KA49 is for Lear-Siegler furnaces.
- All models are UL Recognized and CSA Certified.
- 42Y Frame (5" body dia.), except where noted in table Enclosure: open air-over, except 4UU95 and 4UU91 are totally enclosed air-over Service factor: 1.0 Max. ambient: 40 C Thermal protection: auto Bearings: sleeve Duty: continuous air-over
Average Product Rating: 5based on 1 reviews
Furnace blower motorTuesday, May 29, 2012
I couldn't believe that it arrived as soon as it did. That was mighty fast, within 3 days of the day I had ordered it. Didn't have to go chasing one down.
Just the motor I was looking for