Average Rating: n/a
$968.15 + 7 Business Day Shipping $27.51
Specs
| Item | Centrifugal Pump |
|---|---|
| Type | Chemical Resistant |
| HP | 3/4 |
| Phase | 1 |
| Inlet Type | 1-1/4" NPT |
| Voltage | 115/230 |
| Amps | 10.0/5.0 |
| Housing Material | 316 Stainless Steel |
| Impeller Material | Stainless Steel |
| Seal Material | Viton, Carbon/Ceramic |
| Seal Type | Mechanical |
| Outlet (In.) | 3/4 NPT |
| Motor Enclosure | TEFC |
| GPM of Water @ 5 Ft. of Head | 58 |
| GPM of Water @ 10 Ft. of Head | 52 |
| GPM of Water @ 15 Ft. of Head | 48 |
| GPM of Water @ 20 Ft. of Head | 47 |
| GPM of Water @ 25 Ft. of Head | 44 |
| GPM of Water @ 30 Ft. of Head | 38 |
| GPM of Water @ 40 Ft. of Head | 29 |
| GPM of Water @ 50 Ft. of Head | 18 |
| GPM of Water @ 60 Ft. of Head | 3 |
| Max. Head (Ft.) | 62 |
| Max. GPM @ Head (Ft.) | 58 @ 5 |
| Best Efficiency GPM @ Head (Ft.) | 30 @ 41 |
| Min. GPM @ Head (Ft.) | 3 @ 60 |
| Best Efficiency Range GPM @ Head (Ft.) | 48-20 @ 15-48 |
| Length (In.) | 13 |
| Width (In.) | 9-1/4 |
| Height (In.) | 7-7/8 |
| Hz | 60 |
| NEMA/IEC Frame | 56J |
| Motor RPM | 3450 |
| Motor Type | Capacitor-Start, Capacitor-Run |
| Service Factor | 1.4 |
| Wetted Materials | 316 Stainless Steel, Viton, Carbon, Ceramic |
| Shaft Material | Stainless Steel |
| Screw Material | Stainless Steel |
| Max. Liquid Temp. (F) | 300 |
| Max. Specific Gravity | 1 |
| Max. Case Pressure (PSI) | 150 |
| Max. Fluid Viscosity | 260 SSU |
| Inlet Pressure (PSI) | 121 |
| Impeller Type | Closed |
| Bearing Type | Ball |
| Duty | Continuous |
| Max. Dia. Solids (In.) | 1/8 |
| Port Rotation | 90 Degrees Increments |
| Drain Plug | No |
| Agency Compliance | CUS |
| Manufacturers Warranty Length | 1 Year |
| Application | Liquid Transfer, Recirculation, Chemical Processing, Cooling, Pressure Boosting, Circulating |
| For Use With | Clear, Non-Flammable/Non-Abrasive Liquids, Compatible with Pump Material |
| Includes | Manual |
| UNSPSC | 40151503 |
| Weight | 32.330000 |
| SKUs | 5WXT2 |
Description
Centrifugal Pump, Chemical Resistant, 3/4 HP, 1 Phase, Stainless Steel Housing, Stainless Steel Impeller , Viton, Carbon/Ceramic Seals, Voltage 115/230, 10.0/5.0 Amps, 1-1/4 In Inlet, 3/4 In Outlet, Motor Enclosure TEFC, Max. Head 62 Ft., Continuous Duty, 1/8 In Max. Dia. Solids, CUS Agency Compliance, Manufacturers Warranty Length 1 Year, Includes Manual
Restrictions
- Note: Not recommended for trichloroethylene.
High-Volume Chemical-Resistant Pumps and Pump Heads
- Designed for continuous-duty high-flow applications, including chemical processing, liquid transfer, cooling, and circulating. Pumps are straight centrifugal and feature a 304 stainless steel impeller and impeller nut. Other wetted materials include carbon, ceramic, and Viton . 1-phase motors are capacitor-start, with automatic thermal reset protection and ball bearings. 3-phase units require a pump control box (sold separately on page 4048). Pump heads require a NEMA 56J motor or 56J pump pedestal with appropriate motor.
- Max. case working pressure: 150 psi Temp. range: 40 to 200 F Max. viscosity: 31 SSU Discharge ports rotate in 90 increments
More Products
Laing ThermotechPump, Canned Motor, Noryl, 3/4 HBx3/4 HBE5-NSHNNN3W-141337806$201.98 + $7.44 Shipping