Average Rating: n/a
$182.65 + 3 Business Day Shipping $10.21
Specs
| Item | DC Blower |
|---|---|
| Type | Flange Mount |
| Wheel Dia. (In.) | 4-1/2 |
| Wheel Width (In.) | 2-1/2 |
| CFM @ 0.000-In. SP | 250 |
| CFM @ 0.200-In. SP | 236 |
| CFM @ 0.400-In. SP | 225 |
| CFM @ 0.600-In. SP | 218 |
| CFM @ 0.800-In. SP | 208 |
| CFM @ 1.000-In. SP | 199 |
| CFM @ 1.200-In. SP | 188 |
| CFM @ 1.600-In. SP | 156 |
| CFM @ 2.000-In. SP | 108 |
| Voltage | 12 DC |
| Hz | 60 |
| Phase | Single |
| Full Load Amps | 10.00 |
| RPM | 3115 |
| Bearing Type | Sleeve |
| Motor Type | DC |
| Motor Enclosure | Open Dripproof |
| Thermal Protection | None |
| Lead Length (In.) | 13 |
| Conduit Box | No |
| Ambient Temp. (Deg. F) | 130 |
| Max. Inlet Temp. (Deg. F) | 104 |
| Inlet Dia. (In.) | 4 |
| Outlet Dia. (In.) | 3-3/4 |
| Overall Height (In.) | 9 |
| Overall Width (In.) | 8-3/4 |
| Overall Depth (In.) | 8-3/4 |
| Wheel Type | Forward Curve |
| Drive Type | Direct |
| Mounting | Shaft Horizontal |
| Housing Material | Reinforced Plastic |
| Agency Compliance | NMMA |
| UNSPSC | 40101601 |
| Weight | 5.700000 |
| SKUs | 4C816 |
Description
Flange Mount Blower, Air Flow @ 0.000 Inch Static Pressure 250 CFM, Speed 3115 , Voltage Rating 12 VDC, Power Rating 137 Watts, Current Rating 12.00 Amps, Wheel Diameter 4 1/2 Inches, Wheel Width 2 1/2 Inches, Inlet Diameter 4 Inches, Load Length 13 Inches, Motor Mount Rigid, Plastic
Flange- and Flex-Mount Plastic Blowers
- Radial design gives high output even in complex installations with longer ducting lengths and/or multiple bends in the ducting. Feature corrosion-resistant materials throughout, low current draw, and slip-on inlet ducting connection. Flex-mount motors feature universal bracket that permits outlet to face any direction. Blowers should not be installed close to sources of direct heat exceeding 130 F. Designed for noncontinuous-duty applications such as emergency backup ventilation portable equipment, and marine, motor, or recreational vehicles.
- DC blowers comply with USCG 183.410 and ISO 8846 MARINE (ignition protection), are listed as NMMA type accepted, and comply with ISO 9097 MARINE (electric fans). CE Certified.
