Average Rating: n/a
$721.72
+ 3 Business Day Shipping $52.97
Specs
| Item | Blower |
|---|---|
| Type | Unassembled, Double Inlet Forward Curve, Belt Drive, With Drive Package |
| Wheel Dia. (In.) | 9-1/2 |
| Wheel Width (In.) | 7-1/8 |
| CFM Range | 2535 to 1650 @ 0.500-In SP to 1.500-In SP |
| CFM @ 0.125-In. SP | # |
| CFM @ 0.250-In. SP | # |
| CFM @ 0.375-In. SP | # |
| CFM @ 0.500-In. SP | 2535 |
| CFM @ 0.625-In. SP | 2430 |
| CFM @ 0.750-In. SP | 2335 |
| CFM @ 1.000-In. SP | 2105 |
| CFM @ 1.250-In. SP | 1870 |
| CFM @ 1.500-In. SP | 1650 |
| Max. Inlet Temp. (Deg. F) | 150 |
| Max. Ambient Temp. (F) | 104 |
| Voltage | 115/230 |
| Hz | 60 |
| Phase | 1 |
| Full Load Amps | 19.6/9.8 |
| Speed | 1 |
| Motor RPM | 1725 |
| Motor HP | 1-1/2 |
| Bearing Type | Ball |
| Motor Type | Capacitor-Start |
| Motor Enclosure | Open Dripproof |
| Blower RPM | 1358 |
| Housing Height (In.) | 16-15/16 |
| Housing Width (In.) | 9-3/16 |
| Housing Depth (In.) | 14-15/16 |
| Discharge Height (In.) | 6-5/16 |
| Discharge Width (In.) | 9-3/16 |
| Mounting | Multipostion |
| Housing Material | Galvanized Steel |
| Housing Finish | None |
| Speed Controllable | No |
| Includes | Motor Mounting Bracket, Isolation Grommets and Mounting Hardware |
| Footnotes | # Motor Overload Condition |
| UNSPSC | 40101601 |
| Weight | 71.490000 |
| SKUs | 7HL89 |
Description
Blower, Unassembled, Double Inlet Forward Curve, Belt Drive, With Drive Package, Wheel Dia. 9-1/2 In., CFM @ 0.125-In. SP #, CFM @ 0.500-In. SP 2535, CFM @ 0.750-In. SP 2335, Max. Inlet Temp. 150 Deg. F, Max. Ambient Temp. 104 F, Voltage 115/230, 60 Hz, 1 Phase, Motor HP 1 1/2, Discharge Height 6-5/16 In., Discharge Width 9-3/16 In., Multipostion Mounting, Includes Motor Mounting Bracket, Isolation Grommets and Mounting Hardware, Footnotes # Motor Overload Condition
Double Inlet Full- and 3/4-Width Forward Curve Belt-Drive Blowers
- Prelubricated, sealed ball bearings with rubber isolators and dynamically balanced forward curved wheel. Precision-ground shafting with both keyways and flats for a wide range of drives and HP. A variable-pitch motor sheave is provided when ordered, complete with drive package for speed adjustment. Die-stamped steel housing with mounting supports. Mounting hardware and isolation grommets included. Blowers include a motor mounting bracket built for 1-1/2 HP maximum. 1/6- to 1-1/2-HP motor and drives for bottom horizontal discharge packed separately, when ordered complete. Longer or shorter belt may be required for other discharge positions. 2- to 5-HP motors are floor mount only.
- Max. blower operating temp.: 150 F Max. motor operating temp.: 104 F Discharge can be rotated in four 90 increments
