Oil Primary Control, Junction Box
Average Rating: 5
|Item||Oil Primary Control|
|Ignition Type||Interrupted and Intermittent|
|Mounting Type||Junction Box|
|Safety Switch Timing||Settable 15, 30 or 45 sec.|
|Amps @ 120V||7.4A|
|For Use With||Hydronic and Forced Air Systems|
|Special Information||2 Line LCD display|
|Dimensions (in.)||4 5/32 in. long x 4 11/32 in. wide x 2 1/2 in. high|
|Dimensions (mm)||105.4 mm long x 110.5 mm wide x 63.5 mm high|
|Temperature Range (F)||-40 F to +147 F|
|Temperature Range (C)||-40 C to +64 C|
|Mounting||Junction box on main burner|
|Approvals, Underwriters Laboratories Inc||UL and cUL Component Recognized|
|Electrical Connections||Burner motor, oil valve, ignition, cad cell, limit, thermostat, alarm|
|Display||2 Line LCD display|
- Oil Primary Controls
- Controls shut down burner on loss of flame or system malfunction.
- Universally compatible controller has field-adjustable valve-on delay and 2-line diagnostic LCD. EnviraCom communication-ready.
- UL and C-UL Recognized Component.
- 120VAC, 60 Hz Order flame sensor/detector separately
Average Product Rating: 5based on 2 reviews
great replacementThursday, December 13, 2012
Great all around replacement. Programmable for exactly what you need.
can view live cad cell readings
Just what I neededTuesday, November 27, 2012
Its an improvement over the 7184U, easier to understand & set up. Got the burner going in a few minutes!