|Max. AC Volts||1000|
|Max. DC Volts||1000|
|Max. AC Amps||10|
|Max. DC Amps||10|
|Max. Ohms||300 megaohm|
|Basic DC Accuracy||+/-0.05% + 2 Digits|
|Battery Type||AAA Alkanlie|
|Safety Rating||CAT III 1000V, CAT IV 600V|
|AC Response||True RMS|
|Capacitance Range||10nF to 10mF|
|Frequency Counter Range||99.99 Hz to 999.99 kHz|
|Temp. Range||-328 to 2501.6 Degrees F (-200 to 1372 Degrees C) (Type K), -346 to 2192 Degrees F (-210 to 1200 Degrees C) (Type J)|
|Auto Power Off||Yes|
|Standards||CAN/CSA-C22.2 No. 61010-1-04, EN/IEC 61010-1:2001, ANSI/UL 61010-1:2004|
|Includes||Test Leads, Test Probes with 19mm, 4mm Tips, K Type Thermocouple Probe, Adapter, Batteries, Instructions|
|Manufacturers Warranty Length||3 yr.|
|Multimeter Style||Full Size|
Average Product Rating: 5based on 2 reviews
Perfect for my needs.Tuesday, August 09, 2011
When working in the Commercial and Institutional HVAC field, especially when troubleshooting DDC panels and controls, a good meter is a must. The U1272A handles this need with ease. The only thing better would be a meter that included accurate low ohm scale - say 0 to 5 or 10 ohms.
Nice meter!Sunday, June 19, 2011
Nice meter, finally some competition for the Fluke 87V. =) Also, Agilent has released an updated version of the firmware and is providing a complementary U1173A IR-USB PC connectivity cable (until Nov 30, 2011) for uploading new firmware. [http://cp.literature.agilent.com/litweb/pdf/U1272A-02.pdf]
Looks great, has a solid feel, seems to be built well.
The "beep" is too loud, kinda annoying when it turns on. You can adjust the Hz of the tone at least. Not a huge problem.