Average Rating: n/a
$2,174.87 + This item ships directly from the manufacturer within 14 business days. Please allow additional time for delivery.
Specs
| Item | Speed Reducer |
|---|---|
| Type | Planetary |
| Shaft Orientation | Parallel |
| Input RPM | 1725 |
| Nominal Output RPM | 86.25 |
| NEMA/IEC Frame | 56C |
| Overhung Load (Lb.) | 1000 |
| Nominal Ratio | 20:1 |
| Max. Input HP | 2 |
| Max. Torque (In.-Lbs.) | 1500 |
| Output Torque @ 1/40 HP (In.-Lb.) | 18 |
| Output Torque @ 1/20 HP (In.-Lb.) | 37 |
| Output Torque @ 1/12 HP (In.-Lb.) | 61 |
| Output Torque @ 1/10 HP (In.-Lb.) | 73 |
| Output Torque @ 1/8 HP (In.-Lb.) | 91 |
| Output Torque @ 1/6 HP (In.-Lb.) | 122 |
| Output Torque @ 1/4 HP (In.-Lb.) | 183 |
| Output Torque @ 1/3 HP (In.-Lb.) | 244 |
| Output Torque @ 1/2 HP (In.-Lb.) | 365 |
| Output Torque @ 3/4 HP (In.-Lb.) | 548 |
| Output Torque @ 1 HP (In.-Lb.) | 731 |
| Output Torque @ 1.5 HP (In.-Lb.) | 1096 |
| Output Torque @ 2 HP (In.-Lb.) | 1461 |
| Rotation | Reversible |
| Mounting | All Positions |
| Lubrication | Grease |
| Finish | Anodize |
| Output Shaft Dia. (In.) | 1.575 |
| Overall Length (In.) | 9.45 |
| UNSPSC | 26111503 |
| Weight | 30.000000 |
| SKUs | 6JKD7 |
Description
Speed Reducer, Planetary, Shaft Orientation Parallel, Input RPM 1725, Nominal Output RPM 86.25, Bore Dia. 5/8 In., NEMA Frame 56C, Overhung Load 1000 Lb., Nominal Ratio 20:1, Max. Torque 1500 In.-Lbs., Reversible Rotation, Output Shaft Dia. 1.575 In., Overall Length 9.45 In.
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Planetary Speed Reducers
- Provide higher torque, higher efficiency, and lower backlash for demanding motion applications. Seals and O-rings provide IP65 protection in harsh environments. ServoMount design has self-aligning input to ensure error-free installation. For other motor frame sizes, see DrillSpot.com .
- Parallel shaft Mount to 56C-Face motor Single-piece steel gears Large, deep-groove ball bearings Reversible Black anodized aluminum housing All-position mounting Grease lubrication
