Average Rating: n/a
$570.49 + 3 Business Day Shipping $23.27
Specs
| Item | Speed Reducer |
|---|---|
| Type | C-Face |
| Shaft Orientation | Right Angle |
| Duty | Standard |
| Input RPM | 1750 |
| Nominal Output RPM | 29 |
| Worm Center Distance | 1.53" |
| NEMA/IEC Frame | 56C |
| Overhung Load (Lb.) | 388 |
| Nominal Ratio | 60:1 |
| Max. Input HP | 1/4 |
| Max. Torque (In.-Lbs.) | 280 |
| Output Torque @ 1/4 HP (In.-Lb.) | 280 |
| Number of Stages | 1 |
| Rotation | Forward/Reverse |
| Mounting | Any Position Except Input Motor Shaft Up |
| Lubrication | Kluber Food Grade |
| Oil Seal | Double Lip |
| Bearings | Ball |
| Finish | Powdered Epoxy Paint |
| Shaft Assembly | Left |
| Output Shaft Dia. (In.) | 1 |
| UNSPSC | 26111503 |
| Weight | 25.800000 |
| SKUs | 4RN80 |
Description
C-Face Right Angle Speed Reducer, Nominal Output Speed 29 RPM, Input RPM 1725-1750, NEMA Frame 56C, Overhung Load 388 Pounds, Nominal Ratio 60:1, Output Torque @ 1/4 HP 280 Inch Pounds, Worm Center Distance 1.54 Inches, Single Output Shaft Assembly, Output Shaft Left Hand Exit Facing Input, Mounting Any Position Except Input Motor Shaft Up
Dayton C-Face Right-Angle Speed Reducers and Bases
- Interchangeable with most Grove (Flexaline) and Ohio (Uniline) reducers. Thread-rolled and hardened alloy steel worm for higher strength and lower power loss; forged bronze and hardened worm gear. Ball bearings on input shaft, tapered roller bearings on output shaft. Cast-iron housing. For low-speed/high-torque applications when coupled to a NEMA 56C-Face, 1750-rpm motor (not included).
- 29 to 350 rpm, continuous-duty All-position mounting with optional bases on this page, except input motor shaft up Shipped with oil Double-lipped and spring-loaded shaft seals; large oil sump
