Average Rating: n/a
$658.43 + 3 Business Day Shipping $22.82
Specs
| Item | Speed Reducer |
|---|---|
| Type | C-Face |
| Shaft Orientation | Right Angle |
| Duty | Standard |
| Input RPM | 1750 |
| Nominal Output RPM | 175 |
| Worm Center Distance | 2.06" |
| NEMA/IEC Frame | 56C |
| Overhung Load (Lb.) | 875 |
| Nominal Ratio | 10:1 |
| Max. Input HP | 2 |
| Max. Torque (In.-Lbs.) | 554 |
| Output Torque @ 1 HP (In.-Lb.) | 314 |
| Output Torque @ 1.5 HP (In.-Lb.) | 477 |
| Output Torque @ 2 HP (In.-Lb.) | 554 |
| Number of Stages | 1 |
| Rotation | Forward/Reverse |
| Mounting | Any Position Except Input Motor Shaft Up |
| Lubrication | Kluber Food Grade |
| Oil Seal | Double Lip |
| Bearings | Ball |
| Finish | Powdered Epoxy Paint |
| Shaft Assembly | Left |
| UNSPSC | 26111503 |
| Weight | 25.100000 |
| SKUs | 4Z306 |
Description
C-Face Right Angle Speed Reducer, Nominal Output Speed 175 RPM, Input RPM 1725-1750, NEMA Frame 56C, Overhung Load 875 Pounds, Nominal Ratio 10:1, Output Torque @ 1 HP 314 Inch Pounds, Output Torque @ 1.5 HP 477 Inch Pounds, Output Torque @ 2 HP 554 Inch Pounds, Worm Center Distance 2.06 Inches, Single Output Shaft Assembly, Output Shaft Left Hand Exit Facing Input, Mounting Any Position Except Input Motor Shaft Up
Dayton C-Face Right-Angle Speed Reducers and Bases
- Interchangeable with most Grove (Flexaline) and Ohio (Uniline) reducers. Thread-rolled and hardened alloy steel worm for higher strength and lower power loss; forged bronze and hardened worm gear. Ball bearings on input shaft, tapered roller bearings on output shaft. Cast-iron housing. For low-speed/high-torque applications when coupled to a NEMA 56C-Face, 1750-rpm motor (not included).
- 29 to 350 rpm, continuous-duty All-position mounting with optional bases on this page, except input motor shaft up Shipped with oil Double-lipped and spring-loaded shaft seals; large oil sump
