Battery Charger/Maintainer, 2 Amp
Average Rating: n/a
|UL Rated Amps 12V||1|
|Amp Hours||Up to 100 Amp Hrs.|
|Manual (M)/Automatic (A)||(A) Automatic|
|Overall Width||1 3/4"|
|Overall Height||1 1/2"|
|Overall Depth||3 3/4"|
|Application||12 Volt Battery Charger/Maintainer|
|Includes||Alligator Clips and Ring Terminals|
- Electronic switching power technology automatically senses battery conditions and adjusts charging levels. Units accept input voltage from 90 to 264V. Use for charging 6 or 12V batteries, including AGM and deep-cycle batteries. Include ring terminals and alligator clips. 6TXC9 and 4NGT1 are sealed, water-resistant units that provide overcharge protection, and charge and maintain batteries from 5 to 80A/hr. 4NGR8, 4NGT1, and 4NGT2 also include a cigarette adapter and carrying case. 2UXD4 is a full-automatic charger with float mode monitoring. LEDs indicate charging, charged, and check battery. Quick-disconnect harness allows snapping either connector into place in seconds. 6TXD0 is a 7-step charger (refresh, soft start, bulk charge, absorption, equalizing, analysis, and float). The IP30-rated enclosure has a louver for ventilation. Includes heavy-duty 6-ft. AC cable and 8-ft. DC cable, alligator clips, and ring terminal harness. 6TXD1 is a 6-step charger (refresh, soft start, bulk charge, absorption, equalizing, and float) that includes a 6-ft. AC cable and 8-ft. DC cable, alligator clips, and ring terminal harness.
- All are UL and C-UL Listed. 4NGT2 is also CE and TUV Listed.
- Battery Chargers and Maintainers