Average Rating: n/a
Specs
| Item | Battery Charger/Maintainer |
|---|---|
| Type | 6 Step Charging |
| UL Rated Amps 12V | 2.7 |
| Amp Hours | 6 to 120 Hrs. |
| Peak Amps | 2.7 |
| Voltage Rating | 36 |
| Manual (M)/Automatic (A) | (A) Automatic |
| AC Cord | 90-140 VAC, 60 Hz |
| Overall Width | 7 1/2" |
| Overall Height | 2" |
| Overall Depth | 3 1/2" |
| Application | 36 Volt Battery Charger/Maintainer |
| Standards | Ul And Cul Approved. |
| Includes | Alligator Clips and Ring Terminals |
| Weight | 2.220000 |
| SKUs | 6TXD1 |
Description
Automatic Battery Charger/MaintainersElectronic switching power technology automatically senses battery conditions and adjusts charging levels. Units accept input voltage from 90 to 264V. Use for charging 6 or 12V batteries, including AGM and deep-cycle batteries. Include ring terminals and alligator clips. 6TXC9 and 4NGT1 are sealed, water-resistant units that provide overcharge protection, and charge and maintain batteries from 5 to 80A/hr. 4NGR8, 4NGT1, and 4NGT2 also include a cigarette adapter and carrying case. 2UXD4 is a full-automatic charger with float mode monitoring. LEDs indicate charging, charged, and check battery. Quick-disconnect harness allows snapping either connector into place in seconds. 6TXD0 is a 7-step charger (refresh, soft start, bulk charge, absorption, equalizing, analysis, and float). The IP30-rated enclosure has a louver for ventilation. Includes heavy-duty 6-ft. AC cable and 8-ft. DC cable, alligator clips, and ring terminal harness. 6TXD1 is a 6-step charger (refresh, soft start, bulk charge, absorption, equalizing, and float) that includes a 6-ft. AC cable and 8-ft. DC cable, alligator clips, and ring terminal harness. All are UL and C-UL Listed. 4NGT2 is also CE and TUV Listed. Battery Chargers and Maintainers
