
Average Rating: n/a

Specs
| Item | Exhaust Ventilator |
|---|---|
| Type | Centrifugal Sidewall Direct Drive |
| Wheel Dia. (In.) | 13-1/4 |
| CFM @ 0.000-In. SP | 1180 |
| CFM @ 0.125-In. SP | 1057 |
| CFM @ 0.250-In. SP | 914 |
| CFM @ 0.375-In. SP | 675 |
| Sones @ 0.250-In. SP @ 5 Ft. | 7.7 |
| Motor Voltage | 115 |
| Phase | 1 |
| Hz | 60 |
| Max. Operating Amps | 2.7 |
| Motor HP | 1/8 |
| Max. BHP | 0.07 |
| RPM | 860 |
| Base Width (In.) | 19 3/4 Dia |
| Base Length (In.) | 19 3/4 Dia |
| Base Height (In.) | 1-3/4 |
| Overall Dia. (In.) | 24-3/8 |
| Overall Height (In.) | 30 |
| Shaft Dia. Wheel End (In.) | 1/2 |
| Mounting Location | Wall |
| Max. Inlet Temp. (Deg. F) | 300 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Wheel Type | Backward Incline |
| Speed Control | 1DGV1 |
| Speed Controllable | at 115 Volt Only |
| Agency Compliance | UL/cUL 705/762 |
| Includes | NEMA 1 Junction Box |
| Recommended Damper Size (In.) | 12 x 12 |
| Recommended Damper Stock No. | 4HX74 |
| UNSPSC | 40101502 |
| Weight | 49.000000 |
| SKUs | 4HZ46 |
Description
- Note: Speed controllers available for 115V units only. For kitchen application, check with local code authorities for minimum duct velocities. Do not use dampers in any kitchen application. NFPA 96.
- Aluminum, backward-inclined wheel 1-piece rolled aluminum windband fully welded to base Motor, drive frame, and blower wheel are isolated from mounting base Motor compartment is isolated from contaminated air NEMA 1 junction box in motor enclosure (Hazardous units have NEMA 7 & 9 disconnect switch) UL and C-UL Listed (Motor only UL Listed for Class I Groups C & D, and Class II Groups F & G for hazardous location units)
- 1-Speed
- For contaminated air with inlet temps. below 300 F. UL 762 Listed Restaurant Exhaust Appliances (YZHW), except hazardous units.






