Solenoid Valve, 2 Way, NC, Brass, 3/4 In
Average Rating: n/a
|Type||For Hazardous Locations|
|Number of Ways||2|
|Cv Flow Factor||5|
|Pipe Size (In.)||3/4|
|Orifice Dia. (In.)||3/4|
|PSI Differential Min.||5|
|Coefficient of Volume||5.00|
|Max. Fluid Temp. (F)||180|
|Coil Insulation Class||F|
|Coil Enclosure||NEMA Type 7, 9|
|Construction Reference No.||14|
|Center Line Pipe Center Size (In.)||3|
|Agency Compliance||CSA Certified|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
- 2-, 3-, and 4-Way Explosionproof Solenoid Valves
- Provide high-flow levels for liquid, corrosive, and air/inert gas service.
- Coil enclosures have a built-in 1/2" NPT conduit hub with strain relief. Designed to contain internal explosions without causing an external hazard for Type 7 Class 1, Division 1 and 2, Groups A, B, C, and D gases or vapors. Type 9 Class 2, Division 1 and 2, Groups E, F, and G. Normally closed valves close when de-energized. Normally open valves open when de-energized.