Average Rating: n/a
$2,163.16 + 3 Business Day Shipping $173.55
Specs
| Item | Exhaust Fan |
|---|---|
| Type | Slant-Wall, Belt-Drive |
| Propeller Dia. (In.) | 48 |
| CFM @ 0.000-In. SP | 21,500 |
| CFM @ 0.050-In. SP | 20,400 |
| CFM @ 0.100-In. SP | 19,300 |
| CFM @ 0.150-In. SP | 18,100 |
| CFM/Watt @ 0.000-In. SP | 19.2 |
| CFM/Watt @ 0.050-In. SP | 16.5 |
| CFM/Watt @ 0.100-In. SP | 16.5 |
| CFM/Watt @ 0.150-In. SP | 15.2 |
| Fan RPM | 469 |
| Voltage | 115/230 |
| Hz | 60 |
| Phase | 1 |
| Full Load Amps | 11.30/5.60 |
| Watts | 1190 |
| HP | 1 |
| Motor RPM | 1750 |
| Motor Type | Capacitor Start |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Motor Insulation | Class B |
| Height (In.) | 62 5/8 |
| Width (In.) | 57 3/8 |
| Max. Depth (In.) | 33 1/8 |
| Opening Required H (In.) | 57-1/8 |
| Opening Required W (In.) | 54-3/4 |
| Flange Width (In.) | 1 21/32 |
| Venturi Clearance Dia. (In.) | 48 1/2 |
| Venturi Depth (In.) | 4 7/8 |
| Mounting Location | Wall |
| Max. Ambient Temp. (F) | 104 |
| Shaft Dia. (In.) | 63/64 |
| Bearing Type | Permanently Lubricated Ball |
| Number of Blades | 4 |
| Propeller Material | Galvanized Steel |
| Frame Material | Galvanized Steel |
| Frame Finish | Galvanized Steel |
| Mesh Size | 2" |
| Includes | Corrosion-resistant Shutter with Quick-release Latches, 6LY25 Belt Tensioner |
| UNSPSC | 40101502 |
| Weight | 257.000000 |
| SKUs | 4ZA71 |
Description
Slantwall Exhaust Fan, Belt Drive, Assembled, Propeller Dia 48 In, 21500 CFM @ 0.000-In SP, Volts 115/230, Full Load Amps 11.3/5.6, 1 HP, Motor RPM 1750, Motor Type Capacitor Start, Motor Enclosure TEFC, Fan RPM 469, Bearing Type Ball, Height 62 5/8 In, Width 57 3/8 In, Max Depth 33 1/8 In, Number of Blades 4, 19.2 CFM/Watt @ 0.000-In SP, Includes Corrosion-resistant Shutter with Quick-release Latches, 6LY25 Belt Tensioner
Restrictions
- Note: OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards.
Slant-Wall and Cone Exhaust Fans
- Slant-Wall
- Venturi panel, housing, and propeller are corrosion-resistant galvanized steel. Vertical mount, flush to inside of building. Each includes fan in housing, intake shutter, and discharge guard. For humid, corrosive, nonexplosive, and nonhazardous environments such as livestock and poultry houses.
- Totally enclosed motor with ball bearings Voltage: 115/230V except 4B051 is 230V only Corrosion-resistant shutter with quick-release latches 6LY25 automatic belt tensioner included with belt drive models
- Corrosion-resistant shutter held with quick-release turn-button latches Discharge guard features 1 x 2" galvanized wire mesh Shipped fully assembled
