Average Rating: n/a
$549.71
+ This item ships directly from the manufacturer within 7 business days. Please allow additional time for delivery.
Specs
| Item | Oil Transfer Pump |
|---|---|
| Type | Electric |
| HP | 1/2 |
| Voltage | 115 VAC |
| Amps | 9 |
| GPM Max. | 4.0 |
| Suction Lift (Ft.) | 6 |
| Nozzle Shutoff | Manual |
| Motor Type | Air Cooled with Thermal Protection with UL listed frame |
| Motor Frame | 56C |
| Inlet | 1" NPT |
| Outlet | 3/4" NPT |
| Hose Length (Ft.) | 8 |
| Hose Material | Rubber |
| Max. Pressure (PSI) | 65 |
| Max. Viscosity (SSU) | 1000 |
| RPM | 1720 |
| Duty Cycle | Continuous |
| Self-Priming | Yes |
| Power Cord Length (Ft.) | 8 |
| Max. Temp. | 140 Degrees F |
| Body Material | Aluminum |
| Gear Material | Steel |
| Tube Material | Steel |
| Suction Tube Length (In.) | 34 |
| Lip Seal | Yes |
| Shaft Material | Steel |
| Application | Oils, Synthetic Oils, Antifreeze, Used Oil, Hydraulic Fluids, Cutting Oils, Oil based Herbicides, Non Flammable Oil Based Solvents, Liquid Soap etc. |
| Height (In.) | 9 |
| Length (In.) | 14-1/2 |
| Width (In.) | 7 |
| Includes | Suction Tube , Bung , Hose & Dispensing Nozzle |
| Manufacturers Warranty Length | 1 Year |
| UNSPSC | 40151532 |
| Weight | 42.000000 |
| SKUs | 12F735 |
Description
Oil Transfer Pump, Electric, 1/2 HP, Voltage 115 VAC, 9 Amps, GPM Max. 4.0, Suction Lift (Ft.) 6, Nozzle Shutoff Manual, Motor Type Air Cooled with Thermal Protection with UL listed frame, Motor Frame 56C, Inlet 1 In. NPT, Outlet 3/4 In. NPT, Hose Length (Ft.) 8, Rubber Hose Material, Max. Pressure (PSI) 65, Max. Viscosity (SSU) 1000, 1720 RPM, Duty Cycle Continuous, Self-Priming Yes, Power Cord Length (Ft.) 8, Max. Temp. 140 Degrees F, Body Material Aluminum, Gear Material Steel
Restrictions
- Note: For combustible-rated liquid transfer tanks, see page 1188.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Oil Pumps
- Dayton
- Self-priming pumps have aluminum, cast-iron, NBR, nylon, polypropylene, PVC, steel, and zinc wetted parts for transfer of antifreeze, bulk oils, and hydraulic fluids. Internal bypass valve operates when discharge pressure exceeds bypass valve setting. Pumps can transfer viscous fluids at low temps. Thermally protected motor. Include bung, 8-ft. discharge hose with dispensing nozzle, 34" suction pipe, and 2" bung adapter for mounting pump on drums or tanks.
- Fill-Rite
