Average Rating: n/a
$1,085.04 + 3 Business Day Shipping $47.45
Specs
| Item | Exhaust Ventilator |
|---|---|
| Type | Centrifugal Sidewall Direct Drive |
| Wheel Dia. (In.) | 13-1/4 |
| CFM @ 0.000-In. SP | 2366 |
| CFM @ 0.125-In. SP | 2305 |
| CFM @ 0.250-In. SP | 2244 |
| CFM @ 0.375-In. SP | 2183 |
| CFM @ 0.500-In. SP | 2122 |
| CFM @ 0.625-In. SP | 2061 |
| CFM @ 0.750-In. SP | 1994 |
| CFM @ 1.000-In. SP | 1838 |
| Sones @ 0.250-In. SP @ 5 Ft. | 18.4 |
| Motor Voltage | 115/230 |
| Phase | 1 |
| Hz | 60 |
| Max. Operating Amps | 10.6/5.3 |
| Motor HP | 3/4 |
| Max. BHP | 0.60 |
| RPM | 1725 |
| Base Width (In.) | 19 3/4 Dia |
| Base Length (In.) | 19 3/4 Dia |
| Base Height (In.) | 1-3/4 |
| Overall Dia. (In.) | 24-3/8 |
| Overall Height (In.) | 30 |
| Shaft Dia. Wheel End (In.) | 1/2 |
| Mounting Location | Wall |
| Max. Inlet Temp. (Deg. F) | 300 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Wheel Type | Backward Incline |
| Speed Controllable | No |
| Agency Compliance | UL/cUL 705/762 |
| Includes | NEMA 1 Junction Box |
| Recommended Damper Size (In.) | 12 x 12 |
| Recommended Damper Stock No. | 4HX74 |
| UNSPSC | 40101502 |
| Weight | 63.000000 |
| SKUs | 4HZ47 |
Description
Exhaust Ventilator, Centrifugal Sidewall Direct Drive, CFM @ 0.000-In SP 2366, @ 0.250-In SP 2244, @ 0.500-In SP 2122, 18.4 Sones @ 0.250-In SP, Wall Mounting Location, Base Width 19 3/4 Dia In, Base Length 19 3/4 Dia In, Max. Inlet Temp. 300 Deg. F, Motor Voltage 115/230, 1 Phase, Motor HP 0.75, 1725 RPM, Wheel Dia 13 1/4 In, Includes NEMA 1 Junction Box
Restrictions
- Note: Speed controllers available for 115V units only. For kitchen application, check with local code authorities for minimum duct velocities. Do not use dampers in any kitchen application. NFPA 96.
Centrifugal Direct-Drive Upblast Exhaust Ventilators
- Aluminum, backward-inclined wheel 1-piece rolled aluminum windband fully welded to base Motor, drive frame, and blower wheel are isolated from mounting base Motor compartment is isolated from contaminated air NEMA 1 junction box in motor enclosure (Hazardous units have NEMA 7 & 9 disconnect switch) UL and C-UL Listed (Motor only UL Listed for Class I Groups C & D, and Class II Groups F & G for hazardous location units)
- 1-Speed
- For contaminated air with inlet temps. below 300 F. UL 762 Listed Restaurant Exhaust Appliances (YZHW), except hazardous units.
